Consolidated ethanol production from Jerusalem artichoke tubers at elevated temperature by <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis> engineered with inulinase expression through cell surface display

Ethanol fermentation from Jerusalem artichoke tubers was performed at elevated temperatures by the consolidated bioprocessing strategy using Saccharomyces cerevisiae MK01 expressing inulinase through cell surface display. No significant difference was observed in yeast growth when temperature was controlled at 38 and 40 °C, respectively, but inulinase activity with yeast cells was substantially enhanced at 40 °C. As a result, enzymatic hydrolysis of inulin was facilitated and ethanol production was improved with 89.3 g/L ethanol produced within 72 h from 198.2 g/L total inulin sugars consumed. Similar results were also observed in ethanol production from Jerusalem artichoke tubers with 85.2 g/L ethanol produced within 72 h from 185.7 g/L total sugars consumed. On the other hand, capital investment on cooling facilities and energy consumption for running the facilities would be saved, since regular cooling water instead of chill water could be used to cool down the fermentation system.     

Osmotic stress decreases complexity underlying the electrophysiological dynamic in soybean

• Studies on plant electrophysiology are mostly focused on specific traits of single cells. Inspired by the complexity of the signalling network in plants, and by analogy with neurons in human brains, we sought evidence of high complexity in the electrical dynamics of plant signalling and a likely relationship with environmental cues.
• An EEG‐like standard protocol was adopted for high‐resolution measurements of the electrical signal in Glycine max seedlings. The signals were continuously recorded in the same plants before and after osmotic stimuli with a ?2 MPa mannitol solution. Non‐linear time series analyses methods were used as follows: auto‐correlation and cross‐correlation function, power spectra density function, and complexity of the time series estimated as Approximate Entropy (ApEn).
• Using Approximate Entropy analysis we found that the level of temporal complexity of the electrical signals was affected by the environmental conditions, decreasing when the plant was subjected to a low osmotic potential. Electrical spikes observed only after stimuli followed a power law distribution, which is indicative of scale invariance.
• Our results suggest that changes in complexity of the electrical signals could be associated with water stress conditions in plants. We hypothesised that the power law distribution of the spikes could be explained by a self‐organised critical state (SOC) after osmotic stress.

     

Phylogenetic analysis of the genus <Emphasis Type="Italic">Argia</Emphasis> Rambur, 1842 (Odonata: Coenagrionidae), based on morphological characters of larvae and mitochondrial DNA sequences

The study of the evolutionary interrelationships among the species encompassed in the Neotropical genus Argia (Zygoptera: Coenagrionidae) has been neglected. The goal of this study is to infer the phylogenetic relationships among 36 species of Argia Rambur, 1842, using complementary data sets (i.e., larval morphology and mitochondrial DNA). The morphological data set comprises 76% of the larvae currently described for this genus and includes 97 morphological characters. From those, 47 characters have not been previously used in taxonomic studies involving dragonflies’ larvae. This is the first cladistic study based on larvae morphology for species within the suborder Zygoptera. Data partitions were analyzed individually, as well as total evidence, using parsimony and Bayesian inference as criteria for optimal-tree selection. The results support the monophyly of the North American species of Argia. This genus can be identified by the combination of eight synapomorphies, four of which are exclusively found in Argia. According to the optimal trees, the individual data sets (i.e., morphology and DNA sequences) have a high level of homoplasy, resulting in soft polytomies and low support for several nodes. The specific relationships of the terminal units differ between the phylogenies; nonetheless, there is historical congruence among them. Within Argia, five clades were consistently recovered. Most of those clades have been identified, at least in part, in previous phylogenetic and taxonomic studies. Indubitably, the morphological characters from larvae have historical signal useful for cladistic and taxonomic inference. Therefore, it should be a priority to pay more attention to this source of characters.     

Biosorption of Cr(VI) by Ceratocystis paradoxa MSR2 Using Isotherm Modelling,Kinetic Study and Optimization of Batch Parameters Using Response Surface Methodology

This study is focused on the possible use of Ceratocystis paradoxa MSR2 native biomass for Cr(VI) biosorption. The influence of experimental parameters such as initial pH, temperature, biomass dosage, initial Cr(VI) concentration and contact time were optimized using batch systems as well as response surface methodology (RSM). Maximum Cr(VI) removal of 68.72% was achieved, at an optimal condition of biomass dosage 2g L⁻¹, initial Cr(VI) concentration of 62.5 mg L⁻¹ and contact time of 60 min. The closeness of the experimental and the predicted values exhibit the success of RSM. The biosorption mechanism of MSR2 biosorbent was well described by Langmuir isotherm and a pseudo second order kinetic model, with a high regression coefficient. The thermodynamic study also revealed the spontaneity and exothermic nature of the process. The surface characterization using FT-IR analysis revealed the involvement of amine, carbonyl and carboxyl groups in the biosorption process. Additionally, desorption efficiency of 92% was found with 0.1 M HNO₃. The Cr(VI) removal efficiency, increased with increase in metal ion concentration, biomass concentration, temperature but with a decrease in pH. The size of the MSR2 biosorbent material was found to be 80 μm using particle size analyzer. Atomic force microscopy (AFM) visualizes the distribution of Cr(VI) on the biosorbent binding sites with alterations in the MSR2 surface structure. The SEM-EDAX analysis was also used to evaluate the binding characteristics of MSR2 strain with Cr(VI) metals. The mechanism of Cr(VI) removal of MSR2 biomass has also been proposed.     

Thiophene Rings Improve the Device Performance of Conjugated Polymers in Polymer Solar Cells with Thick Active Layers

Developing novel materials that tolerate thickness variations of the active layer is critical to further enhance the efficiency of polymer solar cells and enable large‐scale manufacturing. Presently, only a few polymers afford high efficiencies at active layer thickness exceeding 200 nm and molecular design guidelines for developing successful materials are lacking. It is thus highly desirable to identify structural factors that determine the performance of semiconducting conjugated polymers in thick‐film polymer solar cells. Here, it is demonstrated that thiophene rings, introduced in the backbone of alternating donor–acceptor type conjugated polymers, enhance the fill factor and overall efficiency for thick (>200 nm) solar cells. For a series of fluorinated semiconducting polymers derived from electron‐rich benzo[1,2‐b:4,5‐b′]dithiophene units and electron‐deficient 5,6‐difluorobenzo[2,1,3]thiazole units a steady increase of the fill factor and power conversion efficiency is found when introducing thiophene rings between the donor and acceptor units. The increased performance is a synergistic result of an enhanced hole mobility and a suppressed bimolecular charge recombination, which is attributed to more favorable polymer chain packing and finer phase separation.