Habitat suitability of the Wadden Sea for restoration of Zostera marina beds

A conceptual model is proposed, describing potential Zostera marina habitats in the Wadden Sea, based on reported data from laboratory, mesocosm and field studies. Controlling factors in the model are dynamics, degree of desiccation, turbidity, nutrients and salinity. A distinction has been made between a higher and a lower zone of potential habitats, each suitable for different morphotypes of Z. marina. The model relates the decline of Z. marina in the Wadden Sea to increased sediment and water dynamics, turbidity, drainage of sediments (resulting in increased degree of desiccation) and total nutrient loads during the twentieth century. The upper and lower delineation of both the higher and the lower zone of potential Z. marina habitats appear to be determined by one or a combination of several of these factors. Environmental changes in one of these factors will therefore influence the borderlines of the zones. The lower zone of Z. marina will be mainly affected by increased turbidity, sediment dynamics, degree of desiccation during low tide and nutrient load. The higher zone will be affected by increases in water and sediment dynamics, desiccation rates and nutrient loads. Potential Z. marina habitats are located above approx. –0.80 m mean sea level (when turbidity remains at the same level as in the early 1990s) in sheltered, undisturbed locations, and preferably where some freshwater influence is present. At locations with a high, near-marine, salinity, the nutrient load has to be low to allow the growth of Z. marina. The sediment should retain enough water during low tide to keep the plants moist. Our results suggest that the return of Z. marina beds within a reasonable time-scale will require not only suitable habitat conditions, but also revegetation measures, as the changes in the environment resulting from the disappearance of Z. marina may impede its recovery, and the natural import of propagules will be unlikely. Furthermore, the lower zone of Z. marina may require a genotype that is no longer found in the Wadden Sea. Received: 26 April 1999 / Received in revised form: 15 October 1999 / Accepted: 16 October 1999     

Endogenous tissue engineering: PTH therapy for skeletal repair

Based on its proven anabolic effects on bone in osteoporosis patients, recombinant parathyroid hormone (PTH_1-34) has been evaluated as a potential therapy for skeletal repair. In animals, the effect of PTH_1-34 has been investigated in various skeletal repair models such as fractures, allografting, spinal arthrodesis and distraction osteogenesis. These studies have demonstrated that intermittent PTH_1-34 treatment enhances and accelerates the skeletal repair process via a number of mechanisms, which include effects on mesenchymal stem cells, angiogenesis, chondrogenesis, bone formation and resorption. Furthermore, PTH_1-34 has been shown to enhance bone repair in challenged animal models of aging, inflammatory arthritis and glucocorticoid-induced bone loss. This pre-clinical success has led to off-label clinical use and a number of case reports documenting PTH_1-34 treatment of delayed-unions and non-unions have been published. Although a recently completed phase 2 clinical trial of PTH_1-34 treatment of patients with radius fracture has failed to achieve its primary outcome, largely because of effective healing in the placebo group, several secondary outcomes are statistically significant, highlighting important issues concerning the appropriate patient population for PTH_1-34 therapy in skeletal repair. Here, we review our current knowledge of the effects of PTH_1-34 therapy for bone healing, enumerate several critical unresolved issues (e.g., appropriate dosing regimen and indications) and discuss the long-term potential of this drug as an adjuvant for endogenous tissue engineering.     

Solid-phase synthesis of polymyxin B1 and analogues via a safety-catch approach.

As part of a program towards the development of novel antibiotics, a convenient method for solid-phase synthesis of the cyclic cationic peptide polymyxin B1 and analogues thereof is described. The methodology, based on cleavage-by-cyclization using Kenner's safety-catch linker, yields crude products with purities ranging from 37-67%. Antibacterial assays revealed that analogues 23-26, in which the (S)-6-methyloctanoic acid moiety is replaced with shorter acyl chains, exhibit distinct antimicrobial activity. The results suggest that the length of the acyl chain is rather critical for antimicrobial activity. On the other hand, substitution of the hydrophobic ring-segment D-Phe-6/Leu-7 in polymyxin B1 with dipeptide mimics (i.e. analogues 27-33) resulted in almost complete loss of antimicrobial activity.     

Phenotype frequencies of vitamin D binding protein (Gc) and of posttransferrin-2 (Ptf-2) in Belgian cattle breeds*

The vitamin D binding protein (Gc) and posttransferrin-2 (Ptf-2) phenotypes have been determined in a number of Belgian cattle breeds. A very slow migrating variant of the Gc protein — Gc C — has been found in White and Red East Flemish breed. This variant was absent from the other breeds studied. This slow variant was identified as a vitamin D binding protein by autoradiography. The Gc C protein was shown to be controlled by a codominant autosomal allele Gc C at the Gclocus. The Gc C protein is probably identical with a fraction previously described in buffalo and an Italian cattle breed. The allele frequencies for the Gc and Pft-2 systems are reported for several Belgian breeds of cattle.     

On the biosynthesis of biotin in Achromobacter IVSW a reinvestigation

[3-¹⁴C, ³⁵S]-L-cysteine was tested as precursor of biotin in Achromobacter IVSW. No significant incorporation was observed, in contradiction with the data previously reported. On the other hand, Achromobacter IVSW converts [³H, ¹⁴C]-dethiobiotin into biotin. This suggests that biotin is biosynthesized in Achromobacter according to the classical dethiobiotin pathway.     

Antimicrobial and antiviral activities of an actinomycete (Streptomyces sp.) isolated from a Brazilian tropical forest soil

A promising producer of bioactive compounds isolated from a Brazilian tropical soil was tested for its range of antimicrobial activities. Strain 606, classified as Streptomyces sp., could not be identified up to species level, suggesting a possible new taxon. The supernatant and 10 extracts and fractions, obtained by extraction and chromatographic techniques, presented antimicrobial activity using antibiograms. The methanolic fraction was highly active against pathogenic bacteria, phytopathogenic fungi and the human pathogenic yeast Candida albicans. It also possessed high antiviral activity inhibiting the propagation of an acyclovir-resistant herpes simplex virus type 1 strain on HEp-2 cells at non-cytotoxic concentration. The strong cytotoxic effect suggests an antitumour action. This revised version was published online in August 2006 with corrections to the Cover Date.     

Effect of various methods of immobilization on the stability of a microbial biosensor for surfactants based onPseudomonas rathonis T

The operating and storage stability of a receptor element of an amperometric biosensor based on thePseudomonas rathonis strain T capable of degrading surfactants was tested. Microbial cells were immobilized by incorporation in gels (agar, agarose, and calcium-alginate), polyvinyl alcohol membrane, adhesion to Chromatographic paper GF/A, or by cross-linking induced by glutaric aldehyde. Incorporation of microbial cells in agar gel provides long-standing conservation of their activity and viability during measurements of high concentrations of surfactants and allows the receptor element of the biosensor to be rapidly recovered after measurements.     

Lung tissue mechanics and extracellular matrix composition in a murine model of silicosis.

The dynamic mechanical properties of lung tissue and its contents of collagen and elastic fibers were studied in strips prepared from mice instilled intratracheally with saline (C) or silica [15 (S15) and 30 days (S30) after instillation]. Resistance, elastance, and hysteresivity were studied during oscillations at different frequencies on S15 and S30. Elastance increased from C to silica groups but was similar between S15 and S30. Resistance was augmented from C to S15 and S30 and was greater in S30 than in S15 at higher frequencies. Hysteresivity was higher in S30 than in C and S15. Silica groups presented a greater amount of collagen than did C. Elastic fiber content increased progressively along time. This increment was related to the higher amount of oxytalan fibers at 15 and 30 days, whereas elaunin and fully developed elastic fibers were augmented only at 30 days. Silicosis led not only to pulmonary fibrosis but also to fibroelastosis, thus assigning a major role to the elastic system in the silicotic lung.     

Distribution of matter in the current-carrying plasma and dense core of the discharge channel formed upon electrical wire explosion

Distribution of matter in the discharge channel formed upon a nanosecond electrical explosion of a single wire in air and vacuum was studied experimentally. Simultaneous use of optical, UV, and X-ray diagnostics made it possible to distinguish qualitatively different regions of the discharge channel, such as the current-carrying layers and the region occupied by a weakly conducting cold plasma. Several series of experiments with 25-μm-diameter 12-mm-long wires made of different materials were performed. The charging voltage and the current amplitude were varied in the ranges of U ₀ = 10–20 kV and I _max ∼ 5–10 kA, respectively. Explosion regimes with a current pause and with and without current interruption, as well as with wire preheating in air and vacuum, were studied. Shadow and schlieren images of the discharge channel were obtained using optical probing at the second harmonic of a YAG: Nd⁺³ laser (λ = 0.532 μm, τ ∼ 10 ns). In the experiments carried out in vacuum, X-ray images of the discharge channel were also obtained using an X-pinch as a point source of probing radiation and UV images were recorded using a four-frame MCP camera.     

The position of the epistatic S locus in the halothane linkage group in pigs

The linkage of the Phi, Pgd, Po2, S, H and halothane sensitivity loci was followed in a Belgian Landrace family, heterozygous for these systems over 6 generations. Recombination next to the S locus occurred mainly in pigs belonging to this particular family. From this investigation the position of the S locus is proved to be outwith the Phi-Pgd region, next to Phi . Therefore the gene sequence S - Phi - Hal -H- Po2 -Pgd is proposed. Higher recombination rates were observed in the female parental line of the multiheterozygous family when compared to the male parental line. Additional data from animals, unrelated to this strain, confirm the evidence of close linkage of the S system to the nearest marker loci.