In Vitro and Sensory Evaluation of Capsaicin-Loaded Nanoformulations

Capsaicin has known health beneficial and therapeutic properties. It is also able to enhance the permeability of drugs across epithelial tissues. Unfortunately, due to its pungency the oral administration of capsaicin is limited. To this end, we assessed the effect of nanoencapsulation of capsaicin, under the hypothesis that this would reduce its pungency. Core-shell nanocapsules with an oily core and stabilized with phospholipids were used. This system was used with or without chitosan coating. In this work, we investigated the in vitro release behavior of capsaicin-loaded formulations in different physiological media (including simulated saliva fluid). We also evaluated the influence of encapsulation of capsaicin on the cell viability of buccal cells (TR146). To study the changes in pungency after encapsulation we carried out a sensory analysis with a trained panel of 24 students. The in vitro release study showed that the systems discharged capsaicin slowly in a monotonic manner and that the chitosan coating had an effect on the release profile. The cytotoxic response of TR146 cells to capsaicin at a concentration of 500 μM, which was evident for the free compound, was reduced following its encapsulation. The sensory study revealed that a chitosan coating results in a lower threshold of perception of the formulation. The nanoencapsulation of capsaicin resulted in attenuation of the sensation of pungency significantly. However, the presence of a chitosan shell around the nanoformulations did not mask the pungency, when compared with uncoated systems.     

From gene to phenotype in Drosophila and other organisms

The growing number of cloned eukaryotic genes lacking a defined or proven biological function poses a major challenge in 'reverse genetics'. A method is described here that permits efficient screening for new lesions in, or close to, genes corresponding to cloned DNA sequences of interest. The technique involves transposon mutagenesis, followed by screening of DNA isolated from a population of mutagenised individuals (or their progeny) for evidence that the population contains at least one individual in which transposon insertion has occurred at the target locus. Detection of rare individuals within the population is facilitated by the use of the polymerase chain reaction (PCR). Once recognised, specific individuals (or their progeny) are isolated from the population by a process of sib-selection. In cases where insertion of the transposon has occurred close to, but not within, the target locus, secondary events involving imprecise excision of the transposon will nonetheless allow the isolation of mutant individuals. Though the method was developed specifically for the transposon-mutagenesis of Drosophila, extensions to other organisms and to other mutagenic strategies are feasible and some of the possibilities are discussed.     

Autoxidation of ascorbic acid catalyzed by a semisynthetic enzyme

The semisynthetic enzyme 6 was prepared by alkylation of the cysteine-25 sulfhydryl group of papain with the bipyridine 5 and was shown to stoichiometrically bind copper ion; 7 catalyzed the autoxidation of ascorbic acid derivatives with saturation kinetics approximately 20-fold faster than a model system using 3-Cu(II).     

The likelihood of persistent arthritis increases with the level of anti-citrullinated peptide antibody and immunoglobulin M rheumatoid factor: a longitudinal study of 376 patients with very early undifferentiated arthritis

Introduction  

We wanted to assess the importance of the levels of anti-citrullinated peptide antibody (anti-CCP) and immunoglobulin M (IgM) rheumatoid factor (RF) in predicting development of persistent arthritis from undifferentiated arthritis (UA), and to investigate whether there is an added predictive value for persistent arthritis in testing for both anti-CCP and IgM RF.     

Integrative inference of gene-regulatory networks in Escherichia coli using information theoretic concepts and sequence analysis

Background  

Although Escherichia coli is one of the best studied model organisms, a comprehensive understanding of its gene regulation is not yet achieved. There exist many approaches to reconstruct regulatory interaction networks from gene expression experiments. Mutual information based approaches are most useful for large-scale network inference.     

Design of biologically active peptides with non-peptidic structural elements. Biological and physical properties of a synthetic analogue of beta-endorphin with unnatural amino acids in the region 6-12

Modelling studies with beta-endorphin have clearly demonstrated that an amphiphilic secondary structural segment is a salient feature of the biologically active conformation of this 31-residue opioid peptide hormone. Here, we have initiated the synthesis of peptide models using unnatural building blocks by designing a beta-endorphin analogue (peptide 6) in which the hydrophilic linker region between the NH2-terminal enkephalin (residues 1-5) and the COOH-terminal helix (residues 10-28, sequence identical to that of peptide 3 in region 13-31, Fig. 1) consists of four units of gamma-amino-gamma-hydroxymethylbutyric acid connected by isopeptidic linkages. Peptide 6 has physical properties similar to that of peptide 3, as shown by surface monolayer and circular dichroism studies. The binding affinities of the two peptides to delta- and mu-receptors are also similar. In rat vas deferens assays, the present model is equipotent to peptide 3. The most striking result of all is the potent analgesic activity displayed by peptide 6 when injected intracerebroventricularly into mice. The potencies of peptides 6 and 3 are comparable in these assays. These studies clearly illustrate that one can use unusual building blocks to construct structural regions of synthetic analogues and still preserve the biological activity of peptide hormones.     

Synthesis of novel acetylene-containing amino acids

Summary.  Novel synthetic procedures for the modification of non-proteinogenic acetylene-containing amino acids have been developed. The functionalization either proceeds via zinc/copper-mediated introduction of alkyl substituents, or via tungsten-catalyzed ring-closing alkyne metathesis reactions. Received March 28, 2002 Accepted October 3, 2002 Published online December 18, 2002 Acknowledgements These investigations are supported (in part) by the Netherlands Research Council for Chemical Sciences (CW) with financial aid from the Netherlands Technology Foundation (STW). Authors' address: Floris P. J. T. Rutjes, Prof. Dr., Department of Organic Chemistry, University of Nijmegen, Toernooiveld 1, NL-6525 ED Nijmegen, The Netherlands, E-mail: rutjes@sci.kun.nl  2, selected data: ¹H NMR (300 MHz, CDCl₃) δ 5.32 (d, J = 7.7 Hz, 1H), 4.44–4.40 (m, 1H), 3.76 (s, 3H), 2.75–2.73 (d, J = 5.0 Hz, 2H), 1.44 (s, 9H); ¹³C NMR (75 MHz, CDCl₃) δ 171.0, 155.0, 80.3, 74.6, 52.6, 51.9, 41.7, 28.3, 24.0; mp = 55°C.  Typical procedure for 5: zinc dust (116 mg, 1.408 mmol) was weighed into a 20 mL flask, which was repeatedly evacuated (with heating using a heat gun) and flushed with argon. Dry DMF (0.5 mL, distilled from CaH₂) and 1,2-dibromoethane (9.2 μL, 0.106 mmol) were added and the flask was heated at 80°C for 40 min. The reaction mixture was allowed to cool to room temperature, trimethylsilyl chloride (4 μL, 0.035 mmol) was added and the resulting mixture was stirred vigorously for a further 30 min under argon. Iodocyclohexane (69 μl, 0.528 mmol) was added and stirred at room temperature for 3 h more after which stirring was ceased to settle the zinc. CuCN (41 mg, 0.458 mmol) and LiCl (40 mg, 0.915 mmol) were heated to 150°C for 2 h and cooled to room temperature. Addition of DMF (1 mL) formed a soluble CuCN·2LiCl complex within 5 min. After cooling the Cu-complex to −15°C, the organozinc reagent was added dropwise followed by the bromoacetylene 2 (116 mg, 0.352 mmol). The mixture was allowed to stir overnight at room temperature. Water was added and the suspension was extracted using heptane, washed with brine, dried (MgSO₄) and concentrated. Purification using flash column chromatography (10% EtOAc in heptane) yielded 5 (100 mg, 81%) as a colorless oil. 5: IR ν 3355, 2929, 2852, 2359, 2337, 1749, 1717, 1498, 1447, 1365, 1251, 1181, 1060; ¹H NMR (300 MHz, CDCl₃) δ 5.28 (d, J = 7.7 Hz, 1H), 4.43–4.38 (m, 1H), 3.73 (s, 3H), 2.69–2.63 (m, 2H), 2.13 (m, 1H), 1.73–1.22 (m, 10H), 1.43 (s, 9H); ¹³C NMR (75 MHz, CDCl₃) δ 171.4, 155.0, 88.1, 79.9, 73.8, 52.3, 32.7, 32.7, 28.8, 28.2, 25.8, 24.6, 23.1; HRMS (EI): calculated for C₁₇H₂₇NO₄ 309.1940, found 309.1937.  A solution of the tungsten catalyst (7 mg, 10 mol%) in C₆H₅Cl (2 mL) was treated with a solution of 14 (49.0 mg, 0.120 mmol) in C₆H₅Cl (5.0 mL) under an argon atmosphere and the resulting mixture was heated at 80°C for 3 h. Evaporation followed by flash column chromatography (80% EtOAc in heptane) afforded 15 (21.0 mg, 50%; 64% after correction for starting material) and 14 (16 mg, 33%) as colorless oils. 15: [α]_D =–14.6 (c = 1, CH₂Cl₂); IR ν 3313, 2931, 2865, 2249, 1744, 1667, 1520, 1366, 1170; ¹H NMR (400 MHz, CDCl₃) δ 7.14 (d, J = 8.7 Hz, 1H), 6.08 (d, J = 8.3 Hz, 1H), 4.78 (q, J = 6.8 Hz, 1H), 4.27 (q, J = 7.9 Hz, 1H), 3.73 (s, 3H), 2.17–2.15 (m, 4H), 2.07–1.96 (m, 2H), 1.79–1.52 (m, 4H), 1.45 (s, 9H), 0.89–0.83 (m, 2H); ¹³C NMR (100 MHz, CDCl₃) δ 173.2, 171.8, 155.8, 80.4, 80.2, 79.3, 53.8, 52.5, 51.2, 32.8 (2×), 28.1, 24.6, 24.2, 18.3 (2×); HRMS (EI): calculated for C₁₈H₂₈N₂O₅