Analysis of crystal growth of methane hydrate using molecular dynamics simulation

Methane hydrate is a crystalline compound with methane molecules enclosed in cages formed by hydrogen-bonded water molecules. Understanding the mechanism of nucleation and crystal growth from methane vapour and liquid water is important for all hydrate applications. However, processes near the water/methane interface are still unclear. In this work, we focused on the crystal growth of methane hydrate seeds located near the water/methane interface. We performed molecular dynamics (MD) simulation and analysed the crystal growth of the hydrate seed at the interface. New cages formed in the liquid water phase were stabilised when they shared faces with the hydrate seed. We also investigated the crystal growth rate as the time development of the number of methane molecules trapped in hydrate cages, based on the trajectory of the MD simulation. The calculated growth rate in the direction that covers the interface was 1.38 times that in the direction towards the inside of the water phase.     

Pollen tube reuses intracellular components of nucellar cells undergoing programmed cell death in Pinus densiflora

Through the process known as programmed cell death (PCD), nucelli of Pinus densiflora serve as the transmitting tissue for growth of the pollen tube. We sought to clarify the processes of degradation of nucellar cell components and their transport to the pollen tube during PCD in response to pollen tube penetration of such nucelli. Stimulated by pollination, synthesis of large amounts of starch grains occurred in cells in a wide region of the nucellus, but as the pollen tube penetrated the nucellus, starch grains were degraded in amyloplasts of nucellar cells. In cells undergoing PCD, electron-dense vacuoles with high membrane contrast appeared, assumed a variety of autophagic structures, expanded, and ultimately collapsed and disappeared. Vesicles and electron-dense amorphous materials were released inside the thickened walls of cells undergoing PCD, and those vesicles and materials reaching the pollen tube after passing through the extracellular matrix were taken into the tube by endocytosis. These results show that in PCD of nucellar cells, intracellular materials are degraded in amyloplasts and vacuoles, and some of the degraded material is supplied to the pollen tube by vesicular transport to support tube growth.     

Structure of human holocarboxylase synthetase gene and mutation spectrum of holocarboxylase synthetase deficiency

Holocarboxylase synthetase (HLCS) is an enzyme that catalyzes the incorporation of biotin into apo-carboxylases, and its deficiency causes biotin-responsive multiple carboxylase deficiency. The reported sequences of cDNA for human HLCS from liver, lymphocyte, and KG-1 myeloid cell lines differ at their 5' regions. To elucidate variations of the human HLCS mRNA and longer 5' cDNA ends, we performed screening of the human liver cDNA library and rapid amplification of the cDNA ends (RACE). Our results suggest the existence of three types of HLCS mRNA that start at different exons. The first type starts at exon 1, and the second type starts at exon 3, and both are found in various human tissues. The third type, corresponding to the cDNA from the KG-1 cell, starts at exon 2 of the HLCS gene. Various splicing patterns from exons 3-6 were also observed. None of the variations of cDNA found created a new initiation codon. Mutation screening from exons 6-14, therefore, was sufficient to detect amino acid changes in HLCS in patients. Our direct sequencing strategy for screening mutations in the HLCS gene revealed mutations in five Japanese patients and seven non-Japanese patients. Our analyses involving 12 Japanese and 13 non-Japanese patients and studies by others indicate that (1) there is no panethnically prevalent mutation; (2) the Arg508Trp, Gly581Ser, and Val550Met mutations are found in both Japanese and non-Japanese populations; (3) the IVS10+5G-->A mutation is predominant and probably a founder mutation in European patients; (4) the 655-656insA, Leu237Pro, and 780delG mutations are unique in Japanese patients; (5) the spectrum of the mutations in the HLCS gene may vary substantially among different ethnic groups.     

Enzymic conversion of 11,12-leukotriene A4 to 11,12-dihydroxy-5,14-cis-7,9-trans-eicosatetraenoic acid. Purification of an epoxide hydrolase from the guinea pig liver cytosol

(11S,12S)-Epoxy-5,14-cis-7,9-trans-eicosatetraenoic acid (11,12-leukotriene A4) was nonenzymically converted to seven compounds: two diastereomers of (12S)-hydroxyeicosatetraeno-delta-lactones (major products), two diastereomers of (5,12S)-dihydroxyeicosatetraenoic acid and three stereoisomers of (11,12S)-dihydroxyeicosatetraenoic acid. Among these compounds, (11R,12S)-dihydroxy-5,14-cis-7,9-trans-eicosatetraenoic acid proved to be the only enzymic product. This hydrolysis activity was present in the cytosol fractions of various tissues of guinea pig such as liver, adrenal gland, small intestine, and brain. We purified the epoxide hydrolase to an apparent homogeneity from the guinea pig liver. The enzyme had a molecular weight of 60,000 as determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis, and an isoelectric point of 7.3. The partial amino acid sequence was different from that of the microsomal enzyme. Km and Vmax values for 11,12-leukotriene A4 were 18 microM and 2.4 mumol/min/mg protein, respectively. These results indicate that 11,12-dihydroxyeicosatetraenoic acid is enzymically synthesized from 11,12-leukotriene A4 by the action of the cytosolic epoxide hydrolase in vitro.     

Spatial proximity of the glycine-rich loop and the SH2 thiol in myosin subfragment 1

Subfragment 1 (S1) prepared from rabbit skeletal muscle myosin was digested with trypsin to cleave the 95K heavy chain into three pieces, i.e., the 23K, 50K, and 20K fragments. The trypsin-treated S1 was then cross-linked with p-nitrophenyl iodoacetate. The cross-linker bridged one of the reactive thiols (SH2) in the 20K fragment and a lysine residue in the 23K fragment [Hiratsuka, T. (1987) Biochemistry 26, 3168-3173]. Location of the lysine residue was mapped along the 23K fragment by "end-label fingerprinting", which employed site-directed antibodies against the N-terminus of the 23K fragment and against the C-terminus of the 24K fragment (the 23K fragment plus nine extra residues at its C-terminus). The mapping revealed that Lys-184 or Lys-189 was the residue cross-linked with SH2. Since the cross-linker used here spans only several angstroms, the result indicates that Lys-184 or Lys-189 is very close to SH2 in the three-dimensional structure of myosin head. Examination of the primary structure of the 23K fragment has revealed that these lysine residues are in and very close to the so-called "glycine-rich loop", whose sequence is highly homologous to those of nucleotide-binding sites of various nucleotide-binding proteins.     

Fibroblast state switching orchestrates dermal maturation and wound healing

Murine dermis contains functionally and spatially distinct fibroblast lineages that cease to proliferate in early postnatal life. Here, we propose a model in which a negative feedback loop between extracellular matrix (ECM) deposition and fibroblast proliferation determines dermal architecture. Virtual‐tissue simulations of our model faithfully recapitulate dermal maturation, predicting a loss of spatial segregation of fibroblast lineages and dictating that fibroblast migration is only required for wound healing. To test this, we performed in vivo live imaging of dermal fibroblasts, which revealed that homeostatic tissue architecture is achieved without active cell migration. In contrast, both fibroblast proliferation and migration are key determinants of tissue repair following wounding. The results show that tissue‐scale coordination is driven by the interdependence of cell proliferation and ECM deposition, paving the way for identifying new therapeutic strategies to enhance skin regeneration.     

Evolution of shoot apical meristem structures in vascular plants with respect to plasmodesmatal network

Vascular plants have evolved shoot apical meristems (SAMs), whose structures differ among plant groups. To clarify the evolutionary course of the different structural types of SAMs, we compared plasmodesmatal networks in the SAMs for 17 families and 24 species of angiosperms, gymnosperms, and pteridophytes, using transmission electron microscopy (TEM). The plasmodesmata (PD) in almost all cell walls in median longitudinal sections of SAMs were counted, and the PD density per unit area was calculated for each cell wall. Angiosperm and gymnosperm SAMs have low densities, with no difference between stratified (tunica-corpus) and unstratified structures. SAMs of ferns, including Psilotum and Equisetum, have average densities that are more than three times higher than those of seed plants. Interestingly, microphyllous lycopods have both the fern and seed-plant types of PD networks; Selaginellaceae SAMs with single apical cells have high PD densities, while SAMs of Lycopodiaceae and Isoetaceae with plural initial cells have low PD densities, equivalent to those of seed plants. In summary, PD networks are strongly correlated to SAM organizations-SAMs with single and plural initial cells have the fern and seed-plant types of PD, respectively. The two SAM organizations may have evolved separately in lycophytes and euphyllophytes and may be associated with gain or loss of the ability to form secondary PD.     

In vitro HIV-1 selective integration into the target sequence and decoy-effect of the modified sequence

Although there have been a few reports that the HIV-1 genome can be selectively integrated into the genomic DNA of cultured host cell, the biochemistry of integration selectivity has not been fully understood. We modified the in vitro integration reaction protocol and developed a reaction system with higher efficiency. We used a substrate repeat, 5'-(GTCCCTTCCCAGT)(n)(ACTGGGAAGGGAC)(n)-3', and a modified sequence DNA ligated into a circular plasmid. CAGT and ACTG (shown in italics in the above sequence) in the repeat units originated from the HIV-1 proviral genome ends. Following the incubation of the HIV-1 genome end cDNA and recombinant integrase for the formation of the pre-integration (PI) complex, substrate DNA was reacted with this complex. It was confirmed that the integration selectively occurred in the middle segment of the repeat sequence. In addition, integration frequency and selectivity were positively correlated with repeat number n. On the other hand, both frequency and selectivity decreased markedly when using sequences with deletion of CAGT in the middle position of the original target sequence. Moreover, on incubation with the deleted DNAs and original sequence, the integration efficiency and selectivity for the original target sequence were significantly reduced, which indicated interference effects by the deleted sequence DNAs. Efficiency and selectivity were also found to vary discontinuously with changes in manganese dichloride concentration in the reaction buffer, probably due to its influence on the secondary structure of substrate DNA. Finally, integrase was found to form oligomers on the binding site and substrate DNA formed a loop-like structure. In conclusion, there is a considerable selectivity in HIV-integration into the specified sequence; however, similar DNA sequences can interfere with the integration process, and it is therefore difficult for in vivo integration to occur selectively in the actual host genome DNA.