Calcium-stimulated myofibrillar ATPase activity correlates with shortening velocity of muscle fibres in Xenopus laevis

Summary The iliofibularis muscle ofXenopus laevis is reported to contain five types of fibres which have different force—velocity relationships. Ten fibres of each type were selected on the basis of succinate dehydrogenase activity, cross-sectional area and location in the muscle, in order to assess the validity of the fibre type classification.Maximum calcium-stimulated myofibrillar ATPase activity (V _max) and apparent Michaelis constant (K _m) for ATP were determined for these 50 fibres from serial sections. The values obtained varied according to the type of fibre. Type 1 had the highest and type 5 the lowest values forK _m andV _max.In a separate experiment, single freeze-dried fibres were used to determine the relationship between their ATP content and apparentK _m for ATP. There was a tendency for high ATP concentrations in fibres with highK _m values.When myofibrillar ATPase activity was related to the maximum velocity of shortening of the five fibre types, a significant correlation was found. It is concluded that calcium-stimulated myofibrillar ATPase histochemistry allows an estimate of the maximum shortening velocity of muscle fibres fromXenopus laevis.     

Conformation and aggregation of M13 coat protein studied by molecular dynamics.

Molecular dynamics (MD) simulations are performed on M13 coat protein, a small membrane protein for which both alpha- and beta-structures have been suggested. The simulations are started from initial conformations that are either monomers or dimers of alpha-helices or U-shaped beta-sheets. The lipid bilayer is represented by a hydrophobic potential. The results are analyzed in terms of stability, energy and secondary structure. The U-shaped beta-structure changes from a planar to a twisted form with larger twist for the monomer than the dimer. The beta-sheet is much more flexible than the alpha-helix as monitored by the root mean square (rms) fluctuations of the C alpha atoms. A comparison of the energies after 100 ps MD simulation shows that of the monomers, the alpha-helix has the lowest energy. The energy difference between alpha- and beta-structures decreases from 266 kJ/mol to 148 kJ/mol, when going from monomers to dimers. It is expected that this difference will decrease with higher aggregation numbers.     

An ESR Study of the mobility of the cholestane spin label in oriented lecithin-cholesterol multibilayers.

The motion of the cholestane spin label in oriented lecithin-cholesterol multibilayers is described in terms of a rotational diffusion about the long molecular axis with diffusion coefficient D parrell and a restricted random librational motion about axes perpendicular to the long axis with diffusion coefficient D1. The diffusion coefficients have been determined from the angular dependence of the ESR line shape at various temperatures and cholesterol contents. The temperature dependence of D parrell and D1 clearly shows the transition from the gel to liquid crystalline phase. Increasing amounts of cholesterol reduce the transition temperature. A strong reduction is found from o to 10 mole % cholesterol. At 50 mole % no longer a sharp transition is observed. In the temperature range from 40 to 80 degrees C the range of D is about 10 times larger than the range of D parrell, indicating a high activation energy for the librational motion arising from a strong hindrance by interaction with surrounding molecules. Cholesterol contents up to 10-20 mole % give an increase of D parrell and D1, arising from strong decrease of the transition temperature in this range. Above 10-20 mole % a reduction of D parrell and D1 is found. However, the effect of cholesterol is much stronger on D1 than on D parrell. In the liquid crystalline phase at about 60 degrees C the effect of cholesterol on D parrell is even negligible, while D1 strongly changes. This indicates that in the liquid crystalline phase only the librational motion is influenced by cholesterol, due to a denser packing of the molecules in the bilayer.     

Influence of Water Content and Temperature on Molecular Mobility and Intracellular Glasses in Seeds and Pollen

Although the occurrence of intracellular glasses in seeds and pollen has been established, physical properties such as rotational correlation times and viscosity have not been studied extensively. Using electron paramagnetic resonance spectroscopy, we examined changes in the molecular mobility of the hydrophilic nitroxide spin probe 3-carboxy-proxyl during melting of intracellular glasses in axes of pea (Pisum sativum L.) seeds and cattail (Typha latifolia L.) pollen. The rotational correlation time of the spin probe in intracellular glasses of both organisms was approximately 10⁻³ s. Using the distance between the outer extrema of the electron paramagnetic resonance spectrum (2A_zz) as a measure of molecular mobility, we found a sharp increase in mobility at a definite temperature during heating. This temperature increased with decreasing water content of the samples. Differential scanning calorimetry data on these samples indicated that this sharp increase corresponded to melting of the glassy matrix. Molecular mobility was found to be inversely correlated with storage stability. With decreasing water content, the molecular mobility reached a minimum, and increased again at very low water content. Minimum mobility and maximum storage stability occurred at a similar water content. This correlation suggests that storage stability might be at least partially controlled by molecular mobility. At low temperatures, when storage longevity cannot be determined on a realistic time scale, 2A_zz measurements can provide an estimate of the optimum storage conditions.     

Structure and localization of an essential transmembrane segment of the proton translocation channel of yeast H+-V-ATPase

Vacuolar (H+)-ATPase (V-ATPase) is a proton pump present in several compartments of eukaryotic cells to regulate physiological processes. From biochemical studies it is known that the interaction between arginine 735 present in the seventh transmembrane (TM7) segment from subunit a and specific glutamic acid residues in the subunit c assembly plays an essential role in proton translocation. To provide more detailed structural information about this protein domain, a peptide resembling TM7 (denoted peptide MTM7) from Saccharomyces cerevisiae (yeast) V-ATPase was synthesized and dissolved in two membrane-mimicking solvents: DMSO and SDS. For the first time the secondary structure of the putative TM7 segment from subunit a is obtained by the combined use of CD and NMR spectroscopy. SDS micelles reveal an alpha-helical conformation for peptide MTM7 and in DMSO three alpha-helical regions are identified by 2D 1H-NMR. Based on these conformational findings a new structural model is proposed for the putative TM7 in its natural environment. It is composed of 32 amino acid residues that span the membrane in an alpha-helical conformation. It starts at the cytoplasmic side at residue T719 and ends at the luminal side at residue W751. Both the luminal and cytoplasmatic regions of TM7 are stabilized by the neighboring hydrophobic transmembrane segments of subunit a and the subunit c assembly from V-ATPase.     

Membrane assembly of the bacteriophage Pf3 major coat protein

The Pf3 major coat protein of the Pf3 bacteriophage is stored in the inner membrane of the infected cell during the reproductive cycle. The protein consists of 44 amino acids, and contains an acidic amphipathic N-terminal domain, a hydrophobic domain, and a short basic C-terminal domain. The mainly alpha-helical membrane-bound protein traverses the membrane once, leaving the C-terminus in the cytoplasm and the N-terminus in the periplasm. A cysteine-scanning approach was followed to measure which part of the membrane-bound Pf3 protein is inside or outside the membrane. In this approach, the fluorescence probe N-[(iodoacetyl)amino]ethyl-1-sulfonaphthylamine (IAEDANS) was attached to single-cysteine mutants of the Pf3 coat protein. The labeled mutant coat proteins were reconstituted into the phospholipid DOPC/DOPG (80/20 molar ratio) and DOPE/DOPG (80/20 molar ratio) model membranes. We subsequently studied the fluorescence characteristics at the different positions in the protein. We measured the local polarity of the environment of the probe, as well as the accessibility of the probe to the fluorescence quencher acrylamide. The results of this study show a single membrane-spanning protein with both the C- and N-termini remaining close to the surface of the membrane. A nearly identical result was seen previously for the membrane-bound M13 coat protein. On the basis of a comparison between the results from both studies, we suggest an "L-shaped" membrane-bound model for the Pf3 coat protein. DOPE-containing model membranes revealed a higher polarity, and quenching efficiency at the membrane/water interface. Furthermore, from the outside to the inside of the membrane, a steeper polarity gradient was measured at the PE/PG interface as compared to the PC/PG interface. These results suggest a thinner interface for DOPE/DOPG than for DOPC/DOPG membranes.     

High critical temperature above T(g) may contribute to the stability of biological systems

In this study, we characterized the molecular mobility around T(g) in sugars, poly-L-lysine and dry desiccation-tolerant biological systems, using ST-EPR, (1)H-NMR, and FTIR spectroscopy, to understand the nature and composition of biological glasses. Two distinct changes in the temperature dependence of the rotational correlation time (tau(R)) of the spin probe 3-carboxy-proxyl or the second moment (M(2)) were measured in sugars and poly-L-lysine. With heating, the first change was associated with the melting of the glassy state (T(g)). The second change (T(c)), at which tau(R) abruptly decreased over several orders of magnitude, was found to correspond with the so-called cross-over temperature, where the dynamics changed from solid-like to liquid-like. The temperature interval between T(g) and T(c) increased in the order of sucrose < trehalose < raffinose 50 degrees C, implying that the stability above T(g) improved in the same order. These differences in temperature-dependent mobilities above T(g) suggest that proteins rather than sugars play an important role in the intracellular glass formation. The exceptionally high T(c) of intracellular glasses is expected to provide excellent long-term stability to dry organisms, maintaining a slow molecular motion in the cytoplasm even at temperatures far above T(g).     

Decomposition in estuarine salt marshes: the effect of soil salinity and soil water content

The relation between decomposition rates and soil salinity and moisture conditions in tidal marshes of the Westerschelde estuary was investigated. In the first part of the study, these soil factors were experimentally manipulated in field plots which were either screened from rainwater or which received an additional weekly supply of freshwater from April to September 1989. These treatments had no clear effect on soil salinities and moisture conditions in a low marsh site. Decomposition rates of Spartina anglica leaves (kept in litterbags in the plots) also did not differ between treatments. In screened plots of a middle marsh site, decomposition rate of Elymus pycnanthus leaves decreased significantly. The effect of the experimental treatments on soil moisture content was variable, but comparatively high soil salinity values (up to 61.3) were consistently found in these plots. It is suggested that the elevated salinity levels induced the decrease in decomposition rate.In the second part of the study, cellulolytic decomposition, measured by loss of tensile strength of strips of cotton test cloth, was investigated in relation to a non-manipulated range of soil salinities (3.8–24.2), by exposing the strips in a series of tidal marshes along the salt gradient of the Westerschelde estuary. No correlation between decomposition rate and soil salinity was found. In addition, no relation was found between decomposition rate and soil water content. The results of both parts of this study lead us to the hypothesis that rate limitation of decomposition in estuarine tidal marsh soils is found at high soil salinities only.     

Analysis of time-resolved fluorescence anisotropy in lipid-protein systems

Fluorescent probes located in heterogeneous environments give rise to anomalous time-resolved fluorescence anisotropy. A simple analytical expression of anisotropy has been derived for the case of a small difference in local fluorescence lifetimes. The expression has the diagnostic advantage that the time dependence of the fluorescence anisotropy can be predicted from the differences in fluorescence lifetimes and residual anisotropies of the probes located in different sites. Using this model, the local fluorescence anisotropy parameters and the relative contributions of the lipid probe octadecyl rhodamine B in a lipid environment and in the vicinity of bacteriophage M13 coat protein reconstituted in phospholipid bilayers, composed of 80% 1,2-dimyristoyl-sn-glycero-3-phosphocholine and 20% 1,2-dimyristoyl-sn-glycero-3-phosphoglycerol have been determined experimentally. At 40°C, the correlation times for bound and free probes are 2.3 and 3.0 ns, respectively, while the corresponding order parameters are 0.85 and 0.62, respectively.Abbreviations ESR electron spin resonance - DMPC 1,2-dimyristoyl-sn-glycero-3-phosphocholine - DMPC 1,2-dimyristoyl-sn-glycero-3-phosphoglycerol - L/P ratio phospholipid to coat protein molar ratio - <> average fluorescence lifetime - r(0) initial anisotropy - r() residual anisotropy On leave of Shanghai Medical Equipment Research Institute, 77 Jiang Ning Rd. Shanghai, People's Republic of China Offprint requests to: M. A. Hemminga