Eflect of Relative Humidity on the Bactericidal Activity of Propylene Oxide Vapor

Because of the low toxicity of its breakdown product, propylene oxide (PO) vapor will play an increasingly important role in the preservation of foods. It is therefore necessary that the diversified variables which influence effectiveness of PO treatment be thoroughly investigated and understood prior to advocating its general use in industry. Accordingly, the present study was undertaken to determine the effect of relative humidity (RH) upon the bactericidal activity of PO sterilant atmospheres. Death rates were established at increasing RH values of < 1, 52, 65, 80, and 98% and under constant conditions of concentration, pressure, and temperature. Test bacterial populations were preconditioned to corresponding moisture levels. Results indicate that gram-positive cocci were relatively insensitive to PO vapor at dry conditions but became progressively less resistant with the increase in RH up to a maximum of 65 to 70%. Lactic acid bacteria and gram-negative rods were much more sensitive at dry conditions, showing much less dependency upon water vapor. Bacillus subtilis spores elicited the highest degree of resistance but the death rate substantially increased with the increase in RH.     

A colorimetric method for the determination of indole, and its application to assay of tryptophanase.

Indole reacts with sodium nitrite and glycine-HCl buffer, pH 2.6, to form a red color that is stable for more than 1 week. The reaction is reproducible and is linear over a wide range of indole concentrations (0.05–1.00 μmol). Twelve indole derivatives, including tryptophan, and 17 protein amine acids do not interfere. Indole-3-acetic acid, indole-3-acrylic acid, indole-3-pyruvic acid, 5-indole carboxylic acid, and 5-hydroxyindole-3-acetic acid interfere to varying extents (16–27%). Free indole was determined in biological material containing tryptophan by the present method. The method is also applicable to the assay of tryptophanase activity without prior indole extraction.     

Artonin E Induces Apoptosis via Mitochondrial Dysregulation in SKOV-3 Ovarian Cancer Cells

Artonin E is a prenylated flavonoid isolated from the stem bark of Artocarpus elasticus Reinw.(Moraceae). This study aimed to investigate the apoptotic mechanisms induced by artonin E in a metastatic human ovarian cancer cell line SKOV-3 in vitro. MTT assay, clonogenic assay, acridine orange and propidium iodide double staining, cell cycle and annexin V analyses were performed to explore the mode of artonin E-induced cell death at different time points. DNA laddering, activation of caspases-3, -8, and -9, multi-parametric cytotoxicity-3analysis by high-content screening, measurement of reactive oxygen species generation, and Western blot were employed to study the pathways involved in the apoptosis. MTT results showed that artonin E inhibited the growth of SKOV-3 cells, with IC₅₀ values of 6.5±0.5μg/mL after 72 h treatment, and showed less toxicity toward a normal human ovarian cell lineT1074, with IC₅₀ value of 32.5±0.5μg/mL. Results showed that artonin E induced apoptosis and cell cycle arrest at the S phase. This compound also promoted the activation of caspases-3, -8, and -9. Further investigation into the depletion of mitochondrial membrane potential and release of cytochrome c revealed that artonin E treatment induced apoptosis via regulation of the expression of pro-survival and pro-apoptotic Bcl-2 family members. The expression levels of survivin and HSP70 proteins were also down regulated in SKOV-3 cells treated with artonin E. We propose that artonin E induced an antiproliferative effect that led to S phase cell cycle arrest and apoptosis through dysregulation of mitochondrial pathways, particularly the pro- and anti-apoptosis signaling pathways.     

Hepatoprotective effect of allicin against acetaminophen‐induced liver injury: Role of inflammasome pathway,apoptosis, and liver regeneration

Acetaminophen (APAP) overdose leads to liver injury. NLRP3 inflammasome is a key player in APAP‐induced inflammation. Also, apoptosis and liver regeneration play an important role in liver injury. Therefore, we assessed allicin's protective effect on APAP‐induced hepatotoxicity and studied its effect on NLRP3 inflammasome and apoptosis. Mice in the APAP group were injected by APAP (250 mg/kg, intraperitoneal). The allicin‐treated group received allicin orally (10 mg/kg/d) during 7 days before APAP injection. Serum and hepatic tissues were separated 24 hours after APAP injection. Serum alanine aminotransferase (ALT), aspartate aminotransferase (AST), albumin, alkaline phosphatase (ALP), and hepatic malondialdehyde (MDA) were assessed using the colorimetric method. Hepatic NLRP3 inflammasome, caspase‐1, and interleukin‐1β (IL‐1β) were estimated using enzyme‐linked immunosorbent assay. Hepatic Bcl‐2 and Ki‐67 were investigated by immunohistochemistry. APAP significantly increased AST, ALT, and ALP, whereas allicin significantly decreased their levels. Also, APAP significantly decreased albumin and allicin significantly improved it. APAP produced changes in liver morphology, including inflammation and massive coagulative necrosis. Allicin protected the liver from APAP‐induced necrosis, apoptosis, and hepatocellular degeneration via increasing Bcl‐2 and Ki‐67 levels. APAP significantly increased the hepatic MDA, whereas allicin significantly prevented this increase. APAP markedly activated the NLRP3 inflammasome pathway and consequently increased the production of caspase‐1 and IL‐1β. Interestingly, we found that allicin significantly inhibited NLRP3 inflammasome activation, which resulted in decreased caspase‐1 and IL‐1β levels. Allicin has a hepatoprotective effect against APAP‐induced liver injury via the decline of oxidative stress and inhibition of the inflammasome pathway and apoptosis. Therefore, allicin might be a novel tool to halt the progression of APAP‐stimulated hepatotoxicity.     

Optimization of the demineralization process for the extraction of chitin from Omani Portunidae segnis

Chitin is an organic polymer and it is the most frequent marine natural polysaccharide after cellulose. The main natural sources of chitin are exoskeletons of insects, mollusks, the cell walls of certain fungi and crustaceans such as crabs, shrimps and lobsters. The waste of these marine exoskeletons are pollutant for the environment, but these waste raw materials could be useful for production of commercial products like chitin. Chitin is an important raw material used for water treatment, agricultural, biomedical, biotechnological purposes, food and paper industry and cosmetics. Based on the variety of importance, the present targets of this study are to optimize the demineralization process for the removal of calcium and phosphate contents from the waste of Portunidae segnis (P. segnis) by using acid at ambient temperature and to characterize the isolated demineralized sample as well as the percentage of remaining calcium and phosphorus contents by using Inductively Coupled Plasma-Optical Emission Spectrometry (ICP-OES). The prepared waste carbs coarse powder samples of P. segnis were demineralized with seven different concentrations of hydrochloric acid at ambient temperature for 1 h. All the demineralization samples by the different concentrations were analyzed by using sensitive ICP-OES. The results based on ICP-OES showed that among the seven different concentrations used in the demineralization process for the isolation of chitin, the best was 2 M of HCl concentration for the production of chitin. The results also showed that the optimized concentration 2 M HCl gave the minimum concentration of calcium and phosphorus compared to other concentrations applied in this experiment. In conclusion, the optimized concentration for demineralization process could be used commercially for the isolation or commercial production of chitin for agricultural, biomedical and biotechnological purposes.     

RETRACTED ARTICLE: Acaricidal and pathogenic effects of the entomopathogenic fungus Beauveria bassiana on engorged females of the fowl tick,Argas persicus (Argasidae)

Experimental and Applied Acarology - This study examined the acaricidal, histopathological and genotoxic effects of the entomopathogenic fungus Beauveria bassiana on engorged females of the fowl...     

Toxoplasma gondii profilin and tachyzoites RH strain may manipulate autophagy via downregulating Atg5 and Atg12 and upregulating Atg7

Molecular Biology Reports - Autophagy process is an important defense mechanism against intracellular infection. This process plays a critical role in limiting the development of Toxoplasma gondii....     

Theory for designing mechanically stable single- and double-walled SiGe nanopeapods

Journal of Molecular Modeling - The adsorption and inhibition mechanism of chain length increase and group substitution of imidazole tetrafluoroborate derivatives for the corrosion inhibition of...     

Design of Metasurface-Based Multi-layer THz Filters Utilizing Optimization Algorithm with Distinct Fitness Function Definitions

In this paper, an evolutionary optimization procedure is presented to generate band-pass metasurface-based filters in terahertz regime. As a measure of novelty, pass-band, transition, and out-band characteristics are investigated separately, all of which result in different metasurfaces for filtering applications. The presented approach is defined based on random hill climbing algorithm, regarding the established link between Matlab and HFSS software. A metasurface-based filter with specific properties is considered as the main problem to be solved by the optimization method. Moreover, the fuzzy theory, mean square method, and weighting coefficient procedure are considered to define an efficient fitness function evaluation approach. Also, a step-by-step procedure is used to generate desired structures with a great note of efficiency. The final generated structure has magnificent characteristics including sharp transitions together with transmittance around 0.68 and less than 0.04 at pass-band and out-band regions, respectively. Also, the generated metasurface benefits from wide bandwidth (65%) and great compactness compared to other previous works.