Comparative metabolomics reveals the mechanism of avermectin production enhancement by <Emphasis Type="Italic">S</Emphasis>-adenosylmethionine

It was found that S-adenosylmethionine (SAM) could effectively improve avermectin titer with 30–60 μg/mL addition to FH medium. To clearly elucidate the mechanism of SAM on intracellular metabolites of Streptomyces avermitilis, a GC–MS-based comparative metabolomics approach was carried out. First, 230 intracellular metabolites were identified and 14 of them remarkably influenced avermectin biosynthesis were discriminative biomarkers between non-SAM groups and SAM-treated groups by principal components analysis (PCA) and partial least squares (PLS). Based on further key metabolic pathway analyses, these biomarkers, such as glucose, oxaloacetic acid, fatty acids (in soybean oil), threonine, valine, and leucine, were identified as potentially beneficial precursors and added in medium. Compared with single-precursor feeding, the combined feeding of the precursors and SAM markedly increased the avermectin titer. The co-feeding approach not only directly verified our hypothesis on the mechanism of SAM by comparative metabolomics, but also provided a novel strategy to increase avermectin production.     

Thiophene Rings Improve the Device Performance of Conjugated Polymers in Polymer Solar Cells with Thick Active Layers

Developing novel materials that tolerate thickness variations of the active layer is critical to further enhance the efficiency of polymer solar cells and enable large‐scale manufacturing. Presently, only a few polymers afford high efficiencies at active layer thickness exceeding 200 nm and molecular design guidelines for developing successful materials are lacking. It is thus highly desirable to identify structural factors that determine the performance of semiconducting conjugated polymers in thick‐film polymer solar cells. Here, it is demonstrated that thiophene rings, introduced in the backbone of alternating donor–acceptor type conjugated polymers, enhance the fill factor and overall efficiency for thick (>200 nm) solar cells. For a series of fluorinated semiconducting polymers derived from electron‐rich benzo[1,2‐b:4,5‐b′]dithiophene units and electron‐deficient 5,6‐difluorobenzo[2,1,3]thiazole units a steady increase of the fill factor and power conversion efficiency is found when introducing thiophene rings between the donor and acceptor units. The increased performance is a synergistic result of an enhanced hole mobility and a suppressed bimolecular charge recombination, which is attributed to more favorable polymer chain packing and finer phase separation.     

Multi-actor multi-criteria sustainability assessment framework for energy and industrial systems in life cycle perspective under uncertainties. Part 1: weighting method

Purpose

Life cycle sustainability assessment is meaningful for the decision-makers/stakeholders to select the most sustainable option among multiple alternatives; however, there are usually various severe uncertainty problems in sustainability-oriented decision-making, i.e., the vagueness and ambiguity that existed in human judgments and the lack of information. This study aims at developing a novel life cycle multi-criteria sustainability assessment method for helping the decision-makers/stakeholders to determine the sustainability level of the industrial and energy systems. In part 1, an improved interval analytic hierarchy process (AHP) which allows multiple decision-makers/stakeholders to participate in the decision-making was developed to determine the weights of the criteria which were used in life cycle sustainability assessment.

Methods

It is usually difficult for the decision-makers/stakeholders to use the numbers from 1 to 9 and their reciprocals for determining the comparison matrix when using the traditional AHP method for weight calculation, because human judgments usually involve various uncertainties. In order to the overcome this weak point of the traditional AHP, an improved AHP, so-called interval AHP, in which, multiple decision-makers/stakeholders are allowed to participate in the decision-making and allowed to use interval numbers instead of crisp numbers to establish the comparison matrix for determining the weights of the criteria for life cycle sustainability assessment, has been developed.

Results and discussion

The proposed method was used to determine the weights of the four aspects for life cycle sustainability assessment including economic, safety, social, and environmental aspects. Five representative stakeholders were invited to participate in the decision-making. After Monte Carlo simulation, the final weights of the four aspects have been determined with the proposed interval AHP.

Conclusions and perspectives

An interval AHP method was developed for determining the weights of the criteria for life cycle sustainability assessment; the decision-makers are allowed to use interval numbers to establish the comparison matrix for weight calculation. The weighting coefficients determined by Monte Carlo method can accurately reflect the preferences and willingness of multi-actor comparing with the traditional AHP method. This paper merely presents a novel method to calculate the weights of the criteria for life cycle sustainability assessment, but the method for determining the sustainability performance has been presented in part 2.

     

Enhancing Fusarium crown rot resistance by pyramiding large-effect QTL in common wheat (<Emphasis Type="Italic">Triticum aestivum</Emphasis> L.)

Fusarium crown rot (FCR) has become one of the most damaging cereal diseases in semi-arid regions worldwide. Targeting three large-effect QTL (located on the chromosome arm 3BL, 5DS and 2DL, respectively), we investigated the feasibility of enhancing FCR resistance by gene pyramiding. Significant effects were detected for each of the three QTL in both populations assessed. Lines with any combination of two resistant alleles gave significantly better resistance than those with a single resistant allele only and those without any allele, and lines possessing all three resistant alleles showed the best resistance. These results demonstrated that gene pyramiding can be an effective approach in improving FCR resistance. Those lines with resistant alleles from all three QTL could be valuable genetic stocks for breeding programs.     

Determination of the optimal parasitoid‐to‐host ratio for efficient mass‐rearing of the parasitoid,Sclerodermus pupariae (Hymenoptera: Bethylidae)

Sclerodermus pupariae Yang et Yao (Hymenoptera: Bethylidae) is used as a potential biocontrol agent for several buprestid and cerambycid larvae. This study aimed to enhance the efficiency of mass‐rearing of this parasitoid by investigating the fitness gain of this bethylid wasp, including the proportion of successful parasitism and development, brood size, sex ratio, proportion of winged female offspring, body size and longevity of female offspring, under eight different maternal parasitoid density treatments using Thyestilla gebleri Faldermann as host in the laboratory. The results indicated that the foundress densities did not affect the parasitism or emergence rate of this parasitoid. Brood size of the parasitoids increased significantly when the number of maternal wasps ranged from one to four. However, further increases in foundress number did not affect the parasitoid brood size. The sex ratios of S. pupariae were always female‐biased. The proportions of male in the progeny colonies were <10% throughout all experimental treatments. The percentage of winged female progeny was not significantly influenced by the density of adult maternal parasitoids. Body sizes of parasitoids significantly declined with increasing maternal parasitoid densities. Although the parasitoid body size reduced when maternal wasp number was higher, it could be compromised by the relatively higher number of female offspring produced. Further, more than 70% of the parasitoids remained alive when they were stored at 12°C for four months throughout the experiments. These findings suggest that exposure of four female wasps to a single host larva would result in the highest fitness of S. pupariae. Our findings might provide a new approach to enhance the efficiency of mass‐rearing of this bethylid wasp.     

NdhO,a Subunit of NADPH Dehydrogenase,Destabilizes Medium Size Complex of the Enzyme in Synechocystis sp. Strain PCC 6803

Two mutants that grew faster than the wild-type (WT) strain under high light conditions were isolated from Synechocystis sp. strain PCC 6803 transformed with a transposon-bearing library. Both mutants had a tag in ssl1690 encoding NdhO. Deletion of ndhO increased the activity of NADPH dehydrogenase (NDH-1)-dependent cyclic electron transport around photosystem I (NDH-CET), while overexpression decreased the activity. Although deletion and overexpression of ndhO did not have significant effects on the amount of other subunits such as NdhH, NdhI, NdhK, and NdhM in the cells, the amount of these subunits in the medium size NDH-1 (NDH-1M) complex was higher in the ndhO-deletion mutant and much lower in the overexpression strain than in the WT. NdhO strongly interacts with NdhI and NdhK but not with other subunits. NdhI interacts with NdhK and the interaction was blocked by NdhO. The blocking may destabilize the NDH-1M complex and repress the NDH-CET activity. When cells were transferred from growth light to high light, the amounts of NdhI and NdhK increased without significant change in the amount of NdhO, thus decreasing the relative amount of NdhO. This might have decreased the blocking, thereby stabilizing the NDH-1M complex and increasing the NDH-CET activity under high light conditions.     

Phylogeny and comparative genomic analysis of Pteriomorphia (Mollusca: Bivalvia) based on complete mitochondrial genomes

The subclass Pteriomorphia is a morphologically diverse and economically important group of Mollusca. We retrieved 42 mitochondrial genomes (mtGenomes) of Pteriomorphia and concatenated protein-coding genes, rRNAs and tRNAs to assess phylogenetic relationships and divergence times among the families with maximum likelihood (ML) and Bayesian inference (BI) analyses. Both ML and BI analyses strongly support the same topology except for the position of Atrina pectinata. Our study confirms the monophyly of the families Arcidae, Mytilidae, Pteriidae, Ostreidae and Pectinidae. Within Pteriomorphia, we recovered two clusters, one comprising Mytilidae, Arcidae and Pectinidae, the other consisting of Ostreidae, Pteriidae and Pinnidae, but we did not confirm a basal position for any family. The phylogenetic trees suggest that Ostreidae, Pteriidae and Pinnidae should be grouped as the order Ostreoida. Divergence times of major families are estimated as follows: Arcidae, 315.9 Ma; Pectinidae, 384.4 Ma; Ostreidae, 240.8 Ma; Mytilidae, 390.8 Ma. Comparative analysis indicates a low-level codon usage bias (with an average of 50.29) in mtGenomes of Pteriomorphia. In Mytilidae and Ostreidae, the codon usage bias was under mutation pressure rather than selection. Contrastingly, mutation is not the main factor in defining the codon usage in Pectinidae and Pteriidae. Among Ostreidae, Pectinidae and Mytilidae, Ka/Ks ratios range from 0.00 to 1.22 and most values (89.11%) are less than 0.20, indicating that most genes are under strong negative or purifying selection. The protein-coding gene orders show dramatically different patterns in Pteriomorphia. There is no gene block even consisting of two genes that is shared by five families.