An implantable transducer for measuring tension in an anterior cruciate ligament graft.

The goal of this study was to develop a new implantable transducer for measuring anterior cruciate ligament (ACL) graft tension postoperatively in patients who have undergone ACL reconstructive surgery. A unique approach was taken of integrating the transducer into a femoral fixation device. To devise a practical in vivo calibration protocol for the fixation device transducer (FDT), several hypotheses were investigated: (1) The use of a cable versus the actual graft as the means for applying load to the FDT during calibration has no significant effect on the accuracy of the FDT tension measurements; (2) the number of flexion angles at which the device is calibrated has no significant effect on the accuracy of the FDT measurements; (3) the friction between the graft and femoral tunnel has no significant effect on measurement accuracy. To provide data for testing these hypotheses, the FDT was first calibrated with both a cable and a graft over the full range of flexion. Then graft tension was measured simultaneously with both the FDT on the femoral side and load cells, which were connected to the graft on the tibial side, as five cadaver knees were loaded externally. Measurements were made with both standard and overdrilled tunnels. The error in the FDT tension measurements was the difference between the graft tension measured by the FDT and the load cells. Results of the statistical analyses showed that neither the means of applying the calibration load, the number of flexion angles used for calibration, nor the tunnel size had a significant effect on the accuracy of the FDT. Thus a cable may be used instead of the graft to transmit loads to the FDT during calibration, thus simplifying the procedure. Accurate calibration requires data from just three flexion angles of 0, 45, and 90 deg and a curve fit to obtain a calibration curve over a continuous range of flexion within the limits of this angle group. Since friction did not adversely affect the measurement accuracy of the FDT, the femoral tunnel can be drilled to match the diameter of the graft and does not need to be overdrilled. Following these procedures, the error in measuring graft tension with the FDT averages less than 10 percent relative to a full-scale load of 257 N.     

Enhancement of hormonal activity with a monoclonal antibody specific to porcine growth hormone

Abstract

The potentiation of the biological effects of recombinant porcine growth hormone (pGH) by immunologic manipulation was investigated. A monoclonal antibody (mAb), designated PS‐7.6, was raised against pGH and repeatedly shown to enhance the responsiveness of hypophysectomized (hypox) rats to pGH. As a result, animals receiving a combination treatment of pGH and mAb PS‐7.6 together gained significantly more weight than those receiving the same doses of pGH alone. The enhancing action of the mAb was a rapid process and its effective doses ranged from 0.1 to 2 mg/injection. The ability of the antibody to augment the hormonal activity persisted beyond the 5‐day treatment period and the differences in net weight gain between treated and control animals remained significant for 28 days. Results from treatment frequency studies further suggested that pGH when complexed with mAb PS‐7.6 required fewer injections and produced a greater efficacy than being administered alone. Therefore, present findings suggest that mAb PS‐7.6 may prove useful for not only improving the efficiency of pGH, but also developing a novel formulation for sustained pGH release.     

Hydrocarbon-metabolizing activity of various mammalian cells in culture

Summary Two methods for determining the hydrocarbon-metabolizing enzyme activity of cultured mammalian cells were compared. The method designed to measure benzo[a]an-thracene-induced aryl hydrocarbon hydroxylase activity could detect and quantify enzyme activities in low passage rodent cells, but could not reproducibly detect levels in intermediate or high passage mouse, rat, or human cells. The method designed to measure the ability of a cell to convert benzo[a]pyrene from an organic-soluble to an aqueous acetone-soluble form proved to be more reproducible. This technique, when modified, was demonstrated to be an effective screening test for the detection of those lines with higher levels of hydrocarbon-metabolizing enzymes. Supported by the Council for Tobacco Research and Contract NIH 70-2068 within the Virus Cancer Program, National Cancer Institute, National Institutes of Health.     

Terpenoid and morphological variability of Pinus quadrifolia and the natural hybridization with Pinus monophylla in the San Jacinto Mountains in California

Monoterpenoids from wood of Pinus quadrifolia and Pinus monophylla from south of the San Jacinto Mountains in southern California were analysed by gas-liquid chromatography (GLC). The number of needles per fascicle, the number of resin canals, and the number of abaxial and adaxial stomatal rows in the needles were determined. Percentages of mycrene, α-pinene, and to a minor extent of camphene, β-pinene, limonene, and β-phellandrene, the above mentioned morphological characteristics and previously obtained data were all used for identification and characterisation of species intermediacy in the San Jacinto area. It was concluded that many P. quadrifolia trees in the mixed Buck Ridge stand and some trees in two pure stands of the same area were hybrids and that sympatric and to a lesser extent allopatric introgression of P. monophylla into P. quadrifolia takes place in the San Jacinto region. Introgression of P. quadrifolia into P. monophylla could not be demonstrated.     

Separating the climatic signal from tree-ring width and maximum latewood density records

We propose a technique for separating the climatic signal which is contained in two tree-ring parameters widely used in dendroclimatology. The method is based on the removal of the relationship between tree-ring width (TRW) and maximum latewood density (MXD) observed for narrow tree rings from high latitudes. The new technique is tested on data from three larch stands located along the northern timberline in Eurasia. Correlations were calculated between the temperatures of pentads (five consecutive days), TRW chronologies and MXD chronologies calculated according to the standard and proposed methods. The analysis confirms the great importance of summer temperature for tree radial growth and tree-ring formation. TRW is positively correlated with the temperature of four to eight pentads (depending on the region) at the beginning of the growth season, but MXD as obtained by the standard technique is correlated with temperature over a much longer period. For maximum density series from which the relationship between MXD and TRW has been removed (MXD′), there is a clear correlation with temperatures in the second part of the growing season. These results are consistent with the known dynamics of tree-ring growth in high latitudes and mechanisms of tree-ring formation.     

HYLAS: program for generating H curves (abstract three-dimensional representations of long DNA sequences)

The computer program HYLAS generates from a standard DNA lettersequence a three-dimensional space curve (H curve) which embodiesthe entire information content of the original nucleotide sequence.The program can display H curves either as two-dimensional (frontand side view) projections or as stereo-pair images. The curvescan be marked at specific nucleotide locations, annotated, rotatedfor observation from any viewing angle, and manipulated forconvenient side-by-side comparisons. Unlike the cumbersome lettersequences, H curves can be drastically condensed in size withoutlosing their ability to reflect the global nucleotide-distributionpattern of the entire DNA sequence. Often, biologically importantloci can be visually identified on the H curves. HYLAS is writtenin FORTRAN with separate mainframe (IBM- VM/CMS) and microcomputer(MS-DOS) versions. It uses the Tektronix-TCS library of graphicsubroutines. Received on October 24, 1988; accepted on July 15, 1989     

Azide-resistant mutants in Acinetobacter calcoaceticus A2 are defective in protein secretion

Abstract Azide, an inhibitor of ATPase, and a specific inhibitor of protein export was used in order to select for protein secretion mutants in Acinetobacter calcoaceticus A2. Two such mutants were isolated that were azide-resistant and defective in the general protein transport system. The mutation also conferred additional phenotypic changes, including an inability to grow on minimal media or at 40°C. The existence of protein secretion mutants with a selectable phenotype may be useful for the genetic study of protein export.