Epiphyseal-based designs for tibial plateau components--II. Stress analysis in the sagittal plane

A two-dimensional, finite element study was undertaken to establish the stresses in the proximal tibia before and after total knee arthroplasty. Equivalent-thickness models in a sagittal plane were created for the natural, proximal tibia and for the proximal tibia with two different types of tibial plateau components. All components simulated bony ingrowth fixation, i.e. no cement layer existed between component and bone. In addition, the interface between component and bone was assumed to be intimately connected, representing complete bony ingrowth and a rigid state of fixation. Two load cases were considered: a joint reaction force acting in conjunction with a patellar ligament force, simulating the knee at 40 degrees of flexion; and a joint reaction force directed along the long axis of the tibia. For the natural tibia model, the pattern of principal stresses for loadcase 1 more closely corresponds to the epiphyseal plate geometry and trabecular morphology than do the principal stress patterns for loadcase 2. Judging from the distribution of principal stresses, loadcase 1 represents a more severe test of implant design than does loadcase 2. The model of the component with a peg predicted that the trabecular bone near the tip of the peg will experience higher than normal stresses, while the bone stresses near the posterior aspect adjacent to the metal tray will be reduced. A component without pegs that incorporates a posterior chamfer and an anterior lip lead to stress distributions closer to those existing in the natural tibia. The interface geometry for this design is based upon the contour of the epiphyseal plate.     

Evaluation of bone cement failure criteria with applications to the acetabular region

A Strain energy density (SED) criterion based on a fracture mechanics approach was used to assess the possible failure of acetabular bone cement after total hip replacement. Stress distributions in the cement at the bone-cement interface were calculated using two-dimensional finite element analyses. The results indicate that increasing the thickness of bone cement reduces the risk of cement fracture. The addition of a metal backing to the polyethylene cup and retention of the subchondral bone further reduces the risk of failure. The SED criterion was found to predict the same critical regions as zones of possible cement failure as the von Mises' criterion. Although either criterion can be used for predicting failure in this acetabular analysis both criteria are excessively conservative in predicting failure in regions where high principal compressive stresses are present. Further development of cement failure criteria are indicated.     

New base-altered adenosine analogues: Synthesis and affinity at adenosine A1 and A2A receptors

N⁶-Substituted adenosine analogues containing cyclic hydrazines or chiral hydroxy (ar)alkyl groups, designed to interact with the S2 and S3 receptor subregions, have been synthesized and their binding to the adenosine A₁ and A_2A receptors have been investigated. Examples of both types of compounds were found to exhibit highly selective binding (K_i in low nM range) to the rat A₁ receptor.     

Strategically Functionalized Adenosines: Agonists for Adenosine Receptors

Abstract

The syntheses of three classes of adenosine analogues involving cyclosubstitution at the 6-position and functionalization at the 2-position are reported. The target molecules synthesized are stable with respect to hydrolytic deamination by mammalian adenosine deaminase, and, because of major structural changes at the 2- and 6-positions, these compounds are expected to be poor phosphorylation substrates for the kinases. Adenosine receptor binding data reveal that several of the compounds synthesized show excellent A₁ receptor affinity and A₂/A₁ selectivity.     

Potential Inhibitors of HIV Integrase

Abstract

In the search for inhibitors of HIV integrase, the enzyme involved in the integration of viral DNA into host DNA, we have synthesized and studied a number of analogs of the heterocyclic molecule, chloroquine.     

Biodeterioration of crude oil and oil derived products: a review

Biodeterioration of crude oil and oil fuels is a serious economic and an environmental problem all over the world. It is impossible to prevent penetration of microorganisms in oil and fuels both stored in tanks or in oilfields after drilling. Both aerobic and anaerobic microorganisms tend to colonise oil pipelines and oil and fuel storage installations. Complex microbial communities consisting of both hydrocarbon oxidizing microorganisms and bacteria using the metabolites of the former form an ecological niche where they thrive. The accumulation of water at the bottom of storage tanks and in oil pipelines is a primary prerequisite for development of microorganisms in fuels and oil and their subsequent biological fouling. Ability of microorganisms to grow both in a water phase and on inter-phase of water/hydrocarbon as well as the generation of products of their metabolism worsen the physical and chemical properties of oils and fuels. This activity also increases the amount of suspended solids, leads to the formation of slimes and creates a variety of operational problems. Nowadays various test-systems are utilized for microbial monitoring in crude oils and fuels; thus allowing an express determination of both the species and the quantities of microorganisms present. To suppress microbial growth in oils and fuels, both physico-mechanical and chemical methods are applied. Among chemical methods, the preference is given to substances such as biocides, additives, the anti-freezing agents etc that do not deteriorate the quality of oil and fuels and are environmentally friendly. This review is devoted to the analysis of the present knowledge in the field of microbial fouling of crude oils and oil products. The methods utilized for monitoring of microbial contamination and prevention of their undesirable activities are also evaluated. The special focus is given to Russian scientific literature devoted to crude oil and oil products biodeterioration.     

Selective induction of dendritic cells using granulocyte macrophage-colony stimulating factor,but not fms-like tyrosine kinase receptor 3-ligand,activates thyroglobulin-specific CD4+/CD25+ T cells and suppresses experimental autoimmune thyroiditis

Fms-like tyrosine kinase receptor 3-ligand (Flt3-L) and GM-CSF cause expansion of different subsets of dendritic cells and skew the immune response toward predominantly Th1 and Th2 type, respectively. In the present study, we investigated their effects on experimental autoimmune thyroiditis in CBA/J mice. Relative to mouse thyroglobulin (mTg) immunized controls, mTg-immunized mice treated with Flt3-L showed more severe thyroiditis characterized by enhanced lymphocytic infiltration of the thyroid, and IFN-gamma and IL-2 production. In contrast, mice treated with GM-CSF, either before or after immunization with mTg, showed suppressed T cell response to mTg and failed to develop thyroiditis. Lymphocytes from these mice, upon activation with mTg in vitro, produced higher levels of IL-4 and IL-10. Additionally, GM-CSF-treated mice showed an increase in the frequency of CD4(+)/CD25(+) T cells, which suppressed the mTg-specific T cell response. Neutralization of IL-10, but not IL-4, or depletion of CD4(+)/CD25(+) cells resulted in increased mTg-specific in vitro T cell proliferation suggesting that IL-10 produced by the Ag-specific CD4(+)/CD25(+) regulatory T cells might be critical for disease suppression. These results indicate that skewing immune response toward Th2, through selective activation of dendritic cells using GM-CSF, may have therapeutic potential in Th1 dominant autoimmune diseases including Hashimoto's thyroiditis.     

Novel drug designing approach for dual inhibitors as anti-inflammatory agents: implication of pyridine template

Compounds incorporating thiophene moiety, a pi excess five membered heterocycle, have attracted a great deal of research interest, owing to the therapeutic utility of the template as useful drug molecular scaffolding. We report the synthesis and pharmacological evaluation of thiophenes substituted with 4-methanesulfonyl benzoyl moiety at the fifth position of the ring, as possible anti-inflammatory lead candidates. The aryl sulfonyl methyl thiophene analogs AP29, AP82, and AP37, when screened for anti-inflammatory activity in carrageenin induced rat paw edema, an acute in vivo model, exhibited moderate to good activity at a dose level of 100 mg/kg body weight P.o compared to Ibuprofen. In a five day formalin induced rat paw edema, a chronic in vivo anti-inflammatory model, candidates AP29, AP82, and AP37 inhibited the disease progression by 53%, 34%, and 65%, respectively on the fifth day, at a dose level of 100 mg/kg body weight P.o compared to Rofecoxib, Ibuprofen, and Dexamethasone at therapeutic doses which gave a protection of 53.8%, 81.5%, and 81.5%, respectively. The replacement of the 4-methanesulfonyl benzoyl moiety in AP82 with the pyridine template, 3,5-dimethyl-4-methoxy-2-pyridyl function, gave rise to AP84, which was less active in the acute model, but gave 54% and 75% protection both during the first day and fifth day, respectively, in the chronic model. A dual mechanism of action is proposed for AP84, a non-steroidal drug which has exhibited remarkable activity when compared to the steroid dexamethasone. These results open up new avenues in designing novel anti-inflammatory drugs as dual inhibitors with the incorporation of a pyridine template as part of the pharmacophore.