Silicon induces phytochelatin and ROS scavengers facilitating cadmium detoxification in rice

• Cadmium (Cd) is detrimental to crops and the environment. This work examines the natural mechanisms underlying silicon‐ (Si‐)directed Cd detoxification in rice plants.
• The addition of Si to plants under Cd stress caused significant improvements in morphological parameters, chlorophyll score, F_v/F_m and total soluble protein concentration compared to controls, confirming that Si is able to ameliorate Cd‐induced damage in rice plants. This morpho‐physiological evidence was correlated with decreased cell death and electrolyte leakage after Si application.
• The results showed no critical changes in root Cd concentration, while shoot Cd decreased significantly after Si supplementation in comparison with Cd‐stressed rice. Additionally, expression of Cd transporters (OsNRAMP5 and OsHMA2) was significantly down‐regulated while the concentration of phytochelatin, cysteine and glutathione, together with expression of OsPCS1 (phytochelatin synthase) in roots of Cd‐stressed rice was significantly induced when subjected to Si treatment. This confirms that the alleviation of Cd stress is not only limited to the down‐regulation of Cd transporters but also closely related to the phytochelatin‐driven vacuolar storage of Cd in rice roots.
• The enzymatic analysis further revealed the role of SOD and GR enzymes in protecting rice plants from Cd‐induced oxidative harm. These findings suggest a mechanistic basis in rice plants for Si‐mediated mitigation of Cd stress.

     

Beneficial effects of n-hexane bark extract of Onosma echioides L. on diabetic peripheral neuropathy

Onosma echioides Linn (Boraginaceae) is the most frequently used curative herb widely used for kidney obstruction, sciatic pain, and gout. The present study was designed to investigate the therapeutic effects of n-hexane bark extract of O. echioides (OE) L. root in vivo against Streptozotocin-induced diabetic neuropathy in SD rats. For in vivo activity, the experiment was categorized into five different groups (n = 5). Group-I was considered as nondiabetic/normal control (NC) treated with 0.5% carboxymethyl cellulose (CMC), Group II as diabetic control, Group-III, IV, and V served as diabetic treated with OE 50, OE 100, and pregabalin at a dose of 50, 100, and 10 mg/kg body weight, orally, respectively. Body weight, blood glucose, oral glucose tolerance test, behavioral studies (motor coordination test, thermal hyperalgesia, cold allodynia, locomotor activity, oxidative biomarkers (thio barbituric acid reactive substances [TBARS], superoxide dismutase [SOD], glutathione [GSH], and catalase), and histopathology of the sciatic nerve were performed. Treatment with OE showed a dose-dependent increase in neuroprotective activity by improving the myelination and decreasing the axonal swelling of nerve fibers. The verdicts of behavioral activities showed a remarkable effect on animals after the treatment of extract and standard drug pregabalin. In conclusion, our findings supported the traditional application of OE and explored its importance in the management of diabetic neuropathy. Additional clinical experiments may provide novel therapeutic drugs for diabetes and its complications.     

Management of jute yellow mosaic virus disease through cultural practices

A field experiment was conducted to investigate the effect of some management practices to minimise jute yellow mosaic virus disease. The management practices were employed at natural condition and placed randomly with four replications. The treatments were spraying malathion 57 EC, rouging and field sanitation, top dressing of nitrogenous fertiliser, mulching with straw and untreated control. The highest percentage of mosaic incidence was recorded in control and the lowest incidence was recorded in top dressing of nitrogenous fertiliser. Among the treatments, top dressing of nitrogenous fertiliser showed the best performance in terms of increasing yield (3.05?t/ha). The second highest was obtained in rouging and field sanitation which was statistically similar to spraying malathion 57 EC. The best gross margin ($379.02/ha) and increase of gross margin (63.00%) compared to control were achieved in top dressing of nitrogenous fertiliser with the highest benefit-cost ratio (4.84). However, the treatments were found significantly profitable compared to the control indicating the usefulness of the cultural practices in integrated disease management programme for healthy and profitable jute cultivation.     

Risk assessment of heavy metal and metalloid toxicity through a contaminated vegetable (Cucurbita maxima) from wastewater irrigated area: A case study for a site-specific risk assessment in Jhang,Pakistan

The present research was conducted in district Jhang, Pakistan, to evaluate the concentration of metals/metalloids in soil and pumpkin (Cucurbita maxima) irrigated with domestic wastewater. Data revealed that the levels of metals and metalloids in soil samples from two different sites were below the safe limits except Cd, whereas, in the vegetable, the concentrations of As, Se, Ni, Mo, Pb, Mn, and Cu were above the safe limits. The levels of 12 metals and metalloids in the soil were ranged between 0.14 to 22.76 mg/kg at site-I and 0.16 to 22.13 mg/kg at site-II. The levels of these metals in the vegetable were found 0.35 to 61.13 mg/kg at site-I and 0.31 to 53.63 mg/kg at site-II. The transfer factor at both sites was highest for As and Co. The pollution load index recorded for Se, Cu, Cd, Mo, Pb, and Co was greater than 1. The daily intake of As, Mn, and Mo was above the oral reference dose, which reflects that the intake of pumpkin is not safe for the inhabitants of the selected sites. The control measures should be taken to phytoextract heavy metals and metalloids from polluted sites so as to reduce the health risks.     

Mortality incidence estimation using federal death certificate and natality data with an application to Tay–Sachs disease

For confidentiality reasons, US federal death certificate data are incomplete with regards to the dates of birth and death for the decedents, making calculation of total lifetime of a decedent impossible and thus estimation of mortality incidence difficult. This paper proposes the use of natality data and an imputation‐based method to estimate age‐specific mortality incidence rates in the face of this missing information. By utilizing previously determined probabilities of birth, a birth date and death date are imputed for every decedent in the dataset. Thus, the birth cohort of each individual is imputed, and the total on‐study time can be calculated. This idea is implemented in two approaches for estimation of mortality incidence rates. The first is an extension of a person‐time approach, while the second is an extension of a life table approach. Monte Carlo simulations showed that both approaches perform well in comparison to the ideal complete data methods, but that the person‐time method is preferred. An application to Tay–Sachs disease is demonstrated. It is concluded that the imputation methods proposed provide valid estimates of the incidence of death from death certificate data without the need for additional assumptions under which usual mortality rates provide valid estimates.     

Bioremoval capacity of three heavy metals by some microalgae species (Egyptian Isolates)

Three fresh water microalgal isolates [Phormidium ambiguum (Cyanobacterium), Pseudochlorococcum typicum and Scenedesmus quadricauda var quadrispina (Chlorophyta)] were tested for tolerance and removal of mercury (Hg²⁺), lead (Pb²⁺) and cadmium (Cd²⁺) in aqueous solutions as a single metal species at conc. 5–100 mg / L under controled laboratory conditions. The obtained results showed that Hg²⁺ was the most toxic of the three metal ions to the test algae even at low concentration (< 20 mg/L). While lower concentration of Pb²⁺ and Cd²⁺ (5–20 mg / L) enhanced the algal growth (chlorophyll a and protein), elevated concentrations (40–100 mg / L) were inhibitory to the growth. The results also revealed that Ph. ambiguum was the most sensitive alga to the three metal ions even at lower concentrations (5 and 10 mg / L) while P. typicum and S. quadricauda were more tolerant to high metal concentrations up to 100 mg / L. The bioremoval of heavy metal ions (Hg²⁺, Pb²⁺ and Cd²⁺) by P. typicum from aqueous solution showed that the highest percentage of metal bioremoval occurred in the first 30 min of contact recording 97% (Hg²⁺), 86% (Cd²⁺) and 70% (Pb²⁺). Transmission electron microscopy (TEM) was used to study the interaction between heavy metal ions and P. typicum cells. At ultrastructural level, an electron dense layers were detected on the algal cell surfaces when exposed to Cd, Hg and Pb. At the same time, dark spherical electron dense bodies were accumulated in the vacuoles of the algal cells exposed to Pb. Excessive accumulation of starch around the pyrenoids were recorded as well as deteriorations of the algal cell organelles exposed to the three metal ions.     

Correlation between Li Plating Behavior and Surface Characteristics of Carbon Matrix toward Stable Li Metal Anodes

Carbonaceous materials are widely employed to host Li for stable and safe Li metal batteries while relatively little effort is devoted to tailoring the surface properties of carbon to facilitate uniform Li plating. Herein, the correlation between Li plating behavior and the surface characteristics of electrospun porous carbon nanofibers (PCNFs) is systemically elucidated through experiments and theoretical calculations. It is revealed that the neat carbon surface suffers from severe lattice mismatch with Li metal, hindering uniform Li plating. In contrast, open pores created on the PCNF surface serve as active sites for controlled initial nucleation of Li. The introduction of oxygenated functional groups further facilitates the nucleation of Li on PCNFs through the largely reduced nucleation energy barrier. The Li film uniformly deposited on PCNFs enables efficient use of the whole carbon surface, giving rise to enhanced cyclic stability of the electrode. When used as an anode in lithium–sulfur batteries, the modified electrode delivers an excellent energy density of 385 Wh kg^?1 after 100 cycles. The fundamental correlation established in this study is universal to all types of carbonaceous materials and sheds new light on the rational design of high‐performance Li metal anodes by controlling the initial Li nucleation.