Induction of acetoacetate decarboxylase in Clostridium acetobutylicum

Abstract Factors that may initiate the biosynthesis of acetoacetate decarboxylase were investigated in resting cells of Clostridium acetobutylicum . Linear acids from C₁ to C₄ were inducers, whereas branched acids and linear acids from C₅ to C₇ were not inducers of acetoacetate decarboxylase biosynthesis. Induction of acetoacetate decarboxylase was maximal at pH 4.8 in the presence of acid concentrations comparable with those found during fermentation. In growth conditions repression of acetoacetate decarboxylase biosynthesis was found. This fact explains that acetone production by Clostridium acetobutylicum occurs when growth slows down.     

Scale-up of the adenovirus expression system for the production of recombinant protein in human 293S cells

Human 293S cells, a cell line adapted to suspension culture, were grown to 5×10⁶ cells/mL in batch with calcium-free DMEM. These cells, infected with new constructions of adenovirus vectors, yielded as much as 10 to 20% recombinant protein with respect to the total cellular protein content. Until recently, high specific productivity of recombinant protein was limited to low cell density infected cultures of no more than 5×10⁵ cells/mL. In this paper, we show with a model protein, Protein Tyrosine Phosphatase 1C how high product yield can be maintained at high cell densities of 2×10⁶ cells/mL by a medium replacement strategy. This allows the production of as much as 90 mg/L of active recombinant protein per culture volume. Analysis of key limiting/inhibiting medium components showed that glucose addition along with pH control can yield the same productivity as a medium replacement strategy at high cell density in calcium-free DMEM. Finally, the above results were reproduced in 3L bioreactor suspension culture thereby establishing the scalability of this expression system. The process we developed is used routinely with the same success for the production of various recombinant proteins and viruses.Abbreviations CFDMEM calcium-free DMEM - CS bovine calf serum - hpi hours post-infection - J+ enriched Joklik medium - MLP major late promoter - MOI multiplicity of infection (# of infectious viral particle/cell) - q specific consumption rate (mole/cell.h) - pfu plaque forming unit (# of infectious viral particle) - Y yield (g/E6 cells or mole/cell)     

Boosting Superior Lithium Storage Performance of Alloy‐Based Anode Materials via Ultraconformal Sb Coating–Derived Favorable Solid‐Electrolyte Interphase

Alloy materials such as Si and Ge are attractive as high‐capacity anodes for rechargeable batteries, but such anodes undergo severe capacity degradation during discharge–charge processes. Compared to the over‐emphasized efforts on the electrode structure design to mitigate the volume changes, understanding and engineering of the solid‐electrolyte interphase (SEI) are significantly lacking. This work demonstrates that modifying the surface of alloy‐based anode materials by building an ultraconformal layer of Sb can significantly enhance their structural and interfacial stability during cycling. Combined experimental and theoretical studies consistently reveal that the ultraconformal Sb layer is dynamically converted to Li₃Sb during cycling, which can selectively adsorb and catalytically decompose electrolyte additives to form a robust, thin, and dense LiF‐dominated SEI, and simultaneously restrain the decomposition of electrolyte solvents. Hence, the Sb‐coated porous Ge electrode delivers much higher initial Coulombic efficiency of 85% and higher reversible capacity of 1046 mAh g^?1 after 200 cycles at 500 mA g^?1, compared to only 72% and 170 mAh g^?1 for bare porous Ge. The present finding has indicated that tailoring surface structures of electrode materials is an appealing approach to construct a robust SEI and achieve long‐term cycling stability for alloy‐based anode materials.     

Revisiting the Role of Conductivity and Polarity of Host Materials for Long‐Life Lithium–Sulfur Battery

Despite their high theoretical energy density and low cost, lithium–sulfur batteries (LSBs) suffer from poor cycle life and low energy efficiency owing to the polysulfides shuttle and the electronic insulating nature of sulfur. Conductivity and polarity are two critical parameters for the search of optimal sulfur host materials. However, their role in immobilizing polysulfides and enhancing redox kinetics for long‐life LSBs are not fully understood. This work has conducted an evaluation on the role of polarity over conductivity by using a polar but nonconductive platelet ordered mesoporous silica (pOMS) and its replica platelet ordered mesoporous carbon (pOMC), which is conductive but nonpolar. It is found that the polar pOMS/S cathode with a sulfur mass fraction of 80 wt% demonstrates outstanding long‐term cycle stability for 2000 cycles even at a high current density of 2C. Furthermore, the pOMS/S cathode with a high sulfur loading of 6.5 mg cm^?2 illustrates high areal and volumetric capacities with high capacity retention. Complementary physical and electrochemical probes clearly show that surface polarity and structure are more dominant factors for sulfur utilization efficiency and long‐life, while the conductivity can be compensated by the conductive agent involved as a required electrode material during electrode preparation. The present findings shed new light on the design principles of sulfur hosts towards long‐life and highly efficient LSBs.     

Effect of Peroxisome Proliferator-Activated Receptor-γ Coactivator-1 Alpha Variants on Spontaneous Clearance and Fibrosis Progression during Hepatitis C Virus Infection in Moroccan Patients

Virologica Sinica - Hepatitis C virus (HCV) is still one of the main causes of liver disease worldwide. Metabolic disorders, including non-alcoholic fatty liver disease (NAFLD), induced by HCV have...     

An improved method for micropropagation and regeneration of date palm (Phoenix dactylifera L.)

We developed a novel large-scale micropropagation pathway for date palm (Phoenix dactylifera L.) based on organogenesis. We obtained organogenic stems from shoot tip explants of the Moroccan date palm cultivar Najda, and investigated shoot proliferation from these organogenic stems in vitro on various media; Beauchesne medium (BM) and Murashige and Skoog medium (MS) at full-strength, half-strength, and one-third-strength, containing various concentrations (0, 0.25, 0.5, and 1 mg/L) of 2-naphthoxyacetic acid (NOAA) and kinetin. The optimal medium during the multiplication phase was half-strength Murashige and Skoog medium (MS/2) supplemented with 0.5 mg/L NOAA and 0.5 mg/L kinetin (23.5 morphologically superior shoots per explant, with low vitrification rates). For the shoot elongation phase, shoots were transferred to the same proliferation medium, or to MS or MS/2 media without plant growth regulators (PGRs). Shoots elongated rapidly and showed a high rate of root formation on media supplemented with PGRs. For example, on MS/2 medium containing 1 mg/L NOAA and 1 mg/L kinetin, the average shoot length was 15.1 cm, the average number of roots per shoot was 6.2, and their average length was 3.4 cm. On PGR-free media, shoots were shorter with wider and greener leaves, and had fewer roots. The plantlets were transferred to a greenhouse for acclimation. The survival rate after 2 months was related to the medium used during the elongation phase; >90 % of shoots that were cultured on PGR-free media survived, while there was a poor survival rate of shoots that had been cultured on media containing PGRs.     

3D‐Printed Cathodes of LiMn1−xFexPO4 Nanocrystals Achieve Both Ultrahigh Rate and High Capacity for Advanced Lithium‐Ion Battery

A 3D‐printing technology and printed 3D lithium‐ion batteries (3D‐printed LIBs) based on LiMn_0.21Fe_0.79PO₄@C (LMFP) nanocrystal cathodes are developed to achieve both ultrahigh rate and high capacity. Coin cells with 3D‐printed cathodes show impressive electrochemical performance: a capacity of 108.45 mAh g^?1 at 100 C and a reversible capacity of 150.21 mAh g^?1 at 10 C after 1000 cycles. In combination with simulation using a pseudo 2D hidden Markov model and experimental data of 3D‐printed and traditional electrodes, for the first time deep insight into how to achieve the ultrahigh rate performance for a cathode with LMFP nanocrystals is obtained. It is estimated that the Li‐ion diffusion in LMFP nanocrystal is not the rate‐limitation step for the rate to 100 C, however, that the electrolyte diffusion factors, such as solution intrinsic diffusion coefficient, efficiency porosity, and electrode thickness, will dominate ultrahigh rate performance of the cathode. Furthermore, the calculations indicate that the above factors play important roles in the equivalent diffusion coefficient with the electrode beyond a certain thickness, which determines the whole kinetic process in LIBs. This fundamental study should provide helpful guidance for future design of LIBs with superior electrochemical performance.