Endogenous tissue engineering: PTH therapy for skeletal repair

Based on its proven anabolic effects on bone in osteoporosis patients, recombinant parathyroid hormone (PTH_1-34) has been evaluated as a potential therapy for skeletal repair. In animals, the effect of PTH_1-34 has been investigated in various skeletal repair models such as fractures, allografting, spinal arthrodesis and distraction osteogenesis. These studies have demonstrated that intermittent PTH_1-34 treatment enhances and accelerates the skeletal repair process via a number of mechanisms, which include effects on mesenchymal stem cells, angiogenesis, chondrogenesis, bone formation and resorption. Furthermore, PTH_1-34 has been shown to enhance bone repair in challenged animal models of aging, inflammatory arthritis and glucocorticoid-induced bone loss. This pre-clinical success has led to off-label clinical use and a number of case reports documenting PTH_1-34 treatment of delayed-unions and non-unions have been published. Although a recently completed phase 2 clinical trial of PTH_1-34 treatment of patients with radius fracture has failed to achieve its primary outcome, largely because of effective healing in the placebo group, several secondary outcomes are statistically significant, highlighting important issues concerning the appropriate patient population for PTH_1-34 therapy in skeletal repair. Here, we review our current knowledge of the effects of PTH_1-34 therapy for bone healing, enumerate several critical unresolved issues (e.g., appropriate dosing regimen and indications) and discuss the long-term potential of this drug as an adjuvant for endogenous tissue engineering.     

Effect of alkyl side chain variation on the electron-transfer activity of ubiquinone derivatives

The effect of the alkyl side chain of the ubiquinone molecule on the electron-transfer activity of ubiquinone in mitochondrial succinate-cytochrome c reductase is studied by using synthetic ubiquinone derivatives that possess the basic ubiquinone structure of 2,3-dimethoxy-5-methyl-1,4-benzoquinone with different alkyl side chains at the 6-position. The alkyl side chains vary in chain length, degree of saturation, and location of double bonds. When a ubiquinone derivative is used as an electron acceptor for succinate-ubiquinone reductase, an alkyl side chain of six carbons is needed to obtain the maximum activity. However, when it serves as an electron donor for ubiquinol-cytochrome c reductase or as a mediator in succinate-cytochrome c reductase, an alkyl side chain of 10 carbons gives maximal efficiency. Introduction of one or two isolated double bonds into the alkyl side chain of the ubiquinone molecule has little effect on electron-transfer activity. However, a conjugated double bond system in the alkyl side chain drastically reduces electron-transfer efficiency. The effect of the conjugated double bond system on the electron-transferring efficiency of ubiquinone depends on its location in the alkyl side chain. When location is far from the benzoquinone ring, the effect is minimal. These observations together with the results obtained from photoaffinity-labeling studies lead us to conclude that flexibility in the portion of the alkyl side chain immediately adjacent to the benzoquinone ring is required for the electron-transfer activity of ubiquinone.     

Kinetic Process of β-Amyloid Formation via Membrane Binding

Recently we have studied thermodynamics of membrane-mediated β-amyloid formation in equilibrium experiments using penetratin-lipid mixtures. The results showed that penetratin bound to the membrane interface in the α-helical conformation when the peptide/lipid (P/L) ratios were below a lipid-dependent critical value P/L^∗. When P/L reached P/L^∗, small β-aggregates emerged, which served as the nuclei for large β-aggregates. Here we studied the corresponding kinetic process to understand the potential barriers for the membrane-mediated β-amyloid formation. We performed kinetic experiments using giant unilamellar vesicles made of 7:3 DOPC/DOPG. The observed time behavior of individual giant unilamellar vesicles, although complex, exhibited the physical effects seen in equilibrium experiments. Most interestingly, a potential barrier appeared to block penetratin from translocating across the bilayer. As a result, the kinetic value for the critical threshold P/L^∗ is roughly one-half of the value measured in equilibrium where peptides bind symmetrically on both sides of lipid bilayers. We also investigated the similarity and differences between the charged and neutral lipids in their interactions with penetratin. We reached an important conclusion that the bound states of peptides in lipid bilayers are largely independent of the charge on the lipid headgroups.     

Pattern analysis of stem cell differentiation during <Emphasis Type="Italic">in vitro Arabidopsis</Emphasis> organogenesis

Plant somatic cells have the capability to switch their cell fates from differentiated to undifferentiated status under proper culture conditions, which is designated as totipotency. As a result, plant cells can easily regenerate new tissues or organs from a wide variety of explants. However, the mechanism by which plant cells have such remarkable regeneration ability is still largely unknown. In this study, we used a set of meristem-specific marker genes to analyze the patterns of stem cell differentiation in the processes of somatic embryogenesis as well as shoot or root organogenesis in vitro. Our studies furnish preliminary and important information on the patterns of the de novo stem cell differentiation during various types of in vitro organogenesis.     

On the biosynthesis of biotin in Achromobacter IVSW a reinvestigation

[3-¹⁴C, ³⁵S]-L-cysteine was tested as precursor of biotin in Achromobacter IVSW. No significant incorporation was observed, in contradiction with the data previously reported. On the other hand, Achromobacter IVSW converts [³H, ¹⁴C]-dethiobiotin into biotin. This suggests that biotin is biosynthesized in Achromobacter according to the classical dethiobiotin pathway.     

ACE/ACE2 Ratio and MMP-9 Activity as Potential Biomarkers in Tuberculous Pleural Effusions

Objective: Pleural effusion is common problem, but the rapid and reliable diagnosis for specific pathogenic effusions are lacking. This study aimed to identify the diagnosis based on clinical variables to differentiate pleural tuberculous exudates from other pleural effusions. We also investigated the role of renin-angiotensin system (RAS) and matrix metalloproteinase (MMPs) in the pathogenesis of pleural exudates.Experimental design: The major components in RAS and extracellular matrix metabolism, including angiotensin converting enzyme (ACE), ACE2, MMP-2 and MMP-9 activities, were measured and compared in the patients with transudative (n = 45) and exudative (n = 80) effusions. The exudative effusions were come from the patients with tuberculosis (n = 20), pneumonia (n = 32), and adenocarcinoma (n = 28).Results: Increased ACE and equivalent ACE2 activities, resulting in a significantly increased ACE/ACE2 ratio in exudates, were detected compared to these values in transudates. MMP-9 activity in exudates was significantly higher than that in transudates. The significant correlation between ACE and ACE2 activity that was found in transudates was not found in exudates. Advanced analyses showed significantly increased ACE and MMP-9 activities, and decreased ACE2 activity in tuberculous pleural effusions compared with those in pneumonia and adenocarcinoma effusions. The results indicate that increased ACE and MMP-9 activities found in the exudates were mainly contributed from a higher level of both enzyme activities in the tuberculous pleural effusions.Conclusion: Interplay between ACE and ACE2, essential functions in the RAS, and abnormal regulation of MMP-9 probably play a pivotal role in the development of exudative effusions. Moreover, the ACE/ACE2 ratio combined with MMP-9 activity in pleural fluid may be potential biomarkers for diagnosing tuberculous pleurisy.     

Steady-state axisymmetric configurations of a weakly ionized plasma in the field of a rotating magnetized spherical body

Self-consistent steady-state axisymmetric configurations of a plasma envelope with a uniform anisotropic conductivity around a rotating magnetized spherical body are considered. A set of electrodynamic and magnetohydrodynamic equations is analyzed under the assumption that the mass velocity of a moving weakly ionized plasma has only the azimuthal component. The equations describing the profile of the angular frequency of the rotating plasma envelope, the magnetic field, the conduction currents, and the plasma density distribution are solved in the limit of a strong anisotropy of the conductivity of a weakly ionized gas. The applicability of the results obtained to a qualitative interpretation of the phenomena occurring in the plasmaspheres of magnetized planets is discussed.     

Effect of various methods of immobilization on the stability of a microbial biosensor for surfactants based onPseudomonas rathonis T

The operating and storage stability of a receptor element of an amperometric biosensor based on thePseudomonas rathonis strain T capable of degrading surfactants was tested. Microbial cells were immobilized by incorporation in gels (agar, agarose, and calcium-alginate), polyvinyl alcohol membrane, adhesion to Chromatographic paper GF/A, or by cross-linking induced by glutaric aldehyde. Incorporation of microbial cells in agar gel provides long-standing conservation of their activity and viability during measurements of high concentrations of surfactants and allows the receptor element of the biosensor to be rapidly recovered after measurements.     

Effect of separator and inoculum type on electricity generation and microbial community in single-chamber microbial fuel cells

Single-chamber microbial fuel cell (SMFC)-I consisted of 4 separator-electrode assemblies (SEAs) with two types of cation exchange membrane (CEM: Nafion and CMI 7000) and an anion exchange membrane (AEM: AMI 7001). SMFC-II consisted of 4 SEAs with Nafion and three types of nonwoven fabric. SMFC-I and -II were inoculated with anaerobic digested and activated sludge, respectively, and operated under fed-batch mode. In SMFC I, AEM-SEA showed a maximum power density (PD_max). Nafion-SEA showed a PD_max in SMFC II, which was similar to that of Nafion–SEA of SMFC I. Although different bacteria were developed in SMFC-I (Deltaproteobacteria and Firmicutes) and SMFC-II (Gammaproteobacteria, Betaproteobacteria and Bacteroidetes), the inoculum type little affects electricity generation. Variations of pH and oxygen in biofilm have influenced microbial community structure and electricity generation according to the electrode and separator material. Although the electricity generation of non-woven fabric-SEA was less than that of Nafion-SEA, the use of non-woven fabrics is expected to reduce the construction and operating costs of MFCs.     

Distribution of matter in the current-carrying plasma and dense core of the discharge channel formed upon electrical wire explosion

Distribution of matter in the discharge channel formed upon a nanosecond electrical explosion of a single wire in air and vacuum was studied experimentally. Simultaneous use of optical, UV, and X-ray diagnostics made it possible to distinguish qualitatively different regions of the discharge channel, such as the current-carrying layers and the region occupied by a weakly conducting cold plasma. Several series of experiments with 25-μm-diameter 12-mm-long wires made of different materials were performed. The charging voltage and the current amplitude were varied in the ranges of U ₀ = 10–20 kV and I _max ∼ 5–10 kA, respectively. Explosion regimes with a current pause and with and without current interruption, as well as with wire preheating in air and vacuum, were studied. Shadow and schlieren images of the discharge channel were obtained using optical probing at the second harmonic of a YAG: Nd⁺³ laser (λ = 0.532 μm, τ ∼ 10 ns). In the experiments carried out in vacuum, X-ray images of the discharge channel were also obtained using an X-pinch as a point source of probing radiation and UV images were recorded using a four-frame MCP camera.