Soluble, prolonged-acting insulin derivatives. II. Degree of protraction and crystallizability of insulins substituted in positions A17, B8, B13, B27 and B30

It has previously been found that insulins, to which positive charge has been added by substitutions in position B30, thus raising the isoelectric point towards pH 7, had a prolonged action when injected as slightly acidic solutions because such derivatives crystallize very readily upon neutralization. Positive charge has now been added by substituting the B13 and A17 glutamic acid residues with glutamines and B27 threonine with lysine or arginine. These substitutions were introduced by site-specific mutagenesis in a gene coding for a single-chain insulin precursor. By tryptic transpeptidation the single-chain precursors were transformed to the double-chain insulin structure, concomitantly with incorporation of residue B30. Thus insulins combining B13 glutamine, A17 glutamine and B27 lysine or arginine with B30 threonine, threonine amide or lysine amide were synthesized. The time course of blood glucose lowering effect and the absorption were studied after subcutaneous injection in rabbits and pigs. The prolonged action of B30-substituted insulins was markedly enhanced by B27 lysine or arginine substitutions and by B13 glutamine. The B27 residue is located on the surface of the hexamer, so a basic residue in this position presumably promotes the packing of hexamers at neutral pH. The B13 residues cluster in the centre of the hexamer. When the electrostatic repulsive forces from six glutamic acid residues are abolished by substitution with glutamine, a stabilization of the hexamer can be envisaged.(ABSTRACT TRUNCATED AT 250 WORDS)     

Evidence implicating heterozygous deletion of chromosome 7 in the pathogenesis of familial leukemia associated with monosomy 7.

Complete or partial monosomy 7 is a recurring cytogenetic abnormality in acute myelogenous leukemia (AML) and myeloproliferative syndromes (MPS) and is particularly common in patients with Fanconi's anemia and in secondary AML. A familial form of monosomy 7 has been recognized in which two or more siblings develop MPS or AML before age 20. We tested the hypothesis that a recessive cancer susceptibility locus on chromosome 7 was important in the pathogenesis of leukemia in familial monosomy 7 by determining the parental origins of the chromosome 7 retained in the bone marrows of three pairs of affected siblings. We found no overlapping region where all three pairs retained DNA derived from the same paternal or maternal chromosome. These data suggest that inactivation of a single allele of a putative tumor-suppressor gene may be sufficient to contribute to leukemic transformation in familial monosomy 7.     

Apparent decline in the harbour seal Phoca vitulina population near Hvaler, Norway, following an epizootic

From 1986-90 we tagged 98 harbour seal pups at Hvaler, Norway Fifteen were recovered later the same year of which 10 were recovered in 1988, when the seal population was infected by a morbillivirus The epizootic in 1988 resulted in a population decline of c 75% Predicted birth weight did not vary significantly before and after the epizootic Newborn harbour seals have antibodies against the morbillivirus two years after the outbreak of the disease     

Carbohydrate degradation and methane production during fermentation ofLaminaria saccharina (Laminariales,Phaeophyceae)

Anaerobic digestion of the brown algaLaminaria saccharina (L.) Lamour. harvested in spring and autumn was carried out at controlled laboratory conditions in stirred fermentor systems. Due to the normal seasonal variations, the autumn material had a much higher content of carbohydrates such as mannitol and laminaran. Both batch and semi-continuous feeding conditions were investigated for periods up to 800 h, with inoculum provided from previous kelp fermentations. In batch cultures, the methane yield from the autumn material was doubled compared to that of the spring material. Semi-continuous conditions gave more similar methane yields for both raw materials, 0.22 and 0.27 l CH₄ per g VS for spring and autumn material, respectively. In all experiments, mannitol and laminaran were reduced to less than 5 of the initial values within 24–48 hours after inoculation, whereas 30 of the alginate content was detectable even after 30 days. Viscometry revealed that this material was severely depolymerized, and alginate lyase activity was found to develop rapidly in all cultures. Although mannitol and laminaran were fermented much faster than alginate, the total accumulated methane yields seemed to be determined by the total carbohydrate content of the raw material during extended semi-continuous feeding.(*author for correspondence)     

Evaluation of four methods for computing parameter sensitivities in dynamic system models

Computation of state sensitivities with respect to parameters can be a difficult and costly numerical problem when the number of states and parameters is large, or when sensitivities must be computed repeatedly, as with many optimization algorithms. Four methods are evaluated in terms of solution accuracy, and computer-time and storage requirements: direct numerical integration of the complete sensitivity-system differential equations, a reduced-order method based on the controllable states of the sensitivity system, a numerical-quadratures technique applied directly to the analytic solution of the original system, and an approach based on the solution of the transition matrix. Three linear system models, with four different types of inputs, were used as test cases, the largest having 6 states and 12 parameters. The reduced-order method was the most time-efficient in a majority of cases, but it was prone to numerical instability problems in certain situations which may be encountered in applications. It also had the largest storage requirements. For the highest-order system, only direct numerical integration and the transition-matrix method produced sufficiently accurate results for most applications, because of matrix-inversion problems with the other methods. For impulse inputs, the transition-matrix and the numerical-quadratures methods overall were the most computationally efficient, but the transition-matrix approach required much more memory storage.     

Ethanol production from rice hull using Pichia stipitis and optimization of acid pretreatment and detoxification processes

The goal of this study was to produce ethanol from rice hull hydrolysates (RHHs) using Pichia stipitis strains and to optimize dilute acid hydrolysis and detoxification processes by response surface methodology (RSM). The optimized conditions were found as 127.14°C, solid:liquid ratio of 1:10.44 (w/v), acid ratio of 2.52% (w/v), and hydrolysis time of 22.01 min. At these conditions, the fermentable sugar concentration was 21.87 g/L. Additionally, the nondetoxified RHH at optimized conditions contained 865.2 mg/L phenolics, 24.06 g/L fermentable sugar, no hydroxymethylfurfural (HMF), 1.62 g/L acetate, 0.36 g/L lactate, 1.89 g/L glucose, and 13.49 g/L fructose + xylose. Furthermore, RHH was detoxified with various methods and the best procedures were found to be neutralization with CaO or charcoal treatment in terms of the reduction of inhibitory compounds as compared to nondetoxified RHH. After detoxification procedures, the content of hydrolysates consisted of 557.2 and 203.1 mg/L phenolics, 19.7 and 21.60 g/L fermentable sugar, no HMF, 0.98 and 1.39 g/L acetate, 0 and 0.04 g/L lactate, 1.13 and 1.03 g/L glucose, and 8.46 and 12.09 g/L fructose + xylose, respectively. Moreover, the base‐line mediums (control), and nondetoxified and detoxified hydrolysates were used to produce ethanol by using P. stipitis strains. The highest yields except that of base‐line mediums were achieved using neutralization (35.69 and 38.33% by P. stipitis ATCC 58784 and ATCC 58785, respectively) and charcoal (37.55% by P. stipitis ATCC 58785) detoxification methods. Results showed that the rice hull can be utilized as a good feedstock for ethanol production using P. stipitis. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:872–882, 2016     

Evaluation of carbon sources for the production of inulinase by Aspergillus niger A42 and its characterization

Bioprocess and Biosystems Engineering - Inulinases are used for the production of high-fructose syrup and fructooligosaccharides, and are widely utilized in food and pharmaceutical industries. In...     

A full saturated linkage map of<Emphasis Type="Italic"> Picea abies</Emphasis> including AFLP,SSR, ESTP, 5S rDNA and morphological markers

Based on an F₁ progeny of 73 individuals, two parental maps were constructed according to the double pseudo-test cross strategy. The paternal map contained 16 linkage groups for a total genetic length of 1,792 cM. The maternal map covered 1,920 cM, and consisted of 12 linkage groups. These parental maps were then integrated using 66 intercross markers. The resulting consensus map covered 2,035 cM and included 755 markers (661 AFLPs, 74 SSRs, 18 ESTPs, the 5S rDNA and the early cone formation trait) on 12 linkage groups, reflecting the haploid number of chromosomes of Picea abies. The average spacing between two adjacent markers was 2.6 cM. The presence of 39 of the SSR and/or ESTP markers from this consensus map on other published maps of different Picea and Pinus species allowed us to establish partial linkage group homologies across three P. abies maps (up to five common markers per linkage group). This first saturated linkage map of P. abies could be therefore used as a support for developing comparative genome mapping in conifers.Communicated by O. Savolainen