Laccase from Aspergillus niger: A novel tool to graft multifunctional materials of interests and their characterization

In the present study, we propose a green route to prepare poly(3-hydroxybutyrate) [(P(3HB)] grafted ethyl cellulose (EC) based green composites with novel characteristics through laccase-assisted grafting. P(3HB) was used as a side chain whereas, EC as a backbone material under ambient processing conditions. A novel laccase obtained from Aspergillus niger through its heterologous expression in Saccharomyces cerevisiae was used as a green catalyst for grafting purposes without the use of additional initiator and/or cross-linking agents. Subsequently, the resulting P(3HB)-g-EC composites were characterized using a range of analytical and imagining techniques. Fourier transform infrared spectroscopy (FT-IR) spectra showed an increase in the hydrogen-bonding type interactions between the side chains of P(3HB) and backbone material of EC. Evidently, X-ray diffraction (XRD) analysis revealed a decrease in the crystallinity of the P(3HB)-g-EC composites as compared to the pristine individual polymers. A homogeneous P(3HB) distribution was also achieved in case of the graft composite prepared in the presence of 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid) (ABTS) as a mediator along with laccase as compared to the composite prepared using pure laccase alone. A substantial improvement in the thermal and mechanical characteristics was observed for grafted composites up to the different extent as compared to the pristine counterparts. The hydrophobic/hydrophilic properties of the grafted composites were better than those of the pristine counterparts.     

Binding of anti-cardiovascular drug to serum albumin: an insight in the light of spectroscopic and computational approaches

Isoprenaline hydrochloride is a potential cardiovascular drug helps in the smooth functioning of the heart muscles. So, we have performed the binding study of ISO with BSA. This study was investigated by UV absorption, fluorescence, synchronous fluorescence, circular dichroism, etc. The analysis of intrinsic fluorescence data showed the low binding affinity of ISO. The binding constant K_b was 2.8 × 103 M-1 and binding stoichiometry (n) was approximately one and the Gibb’s free energy change at 310 K was determined to be -8.69 kcal mol^?1. Negative Gibb’s free energy change shows the spontaneity of the BSA and ISO interaction. We have found ISO-induced alternation in the UV absorption, synchronous fluorescence and CD spectra in the absence and presence of the quencher indicates the complex formation. In synchronous fluorescence, red shift was obtained because of the complex formation of BSA and ISO. The distance (r) between the BSA (donor) and ISO (acceptor) was 2.89 nm, determined by FRET. DLS measurements interpreted complex formation due to the reduction in hydrodynamic radii of the protein in the presence of the drug. The binding site of ISO was found to be nearer to Trp 134 with the help of molecular docking and the ΔG° was found to be –10.2 kcal mol^?1. The esterase activity result suggests that ISO acts as competitive inhibitor. Thus, this study would help to determine the binding capacity of the drug to the protein which may indicate the efficiency of diffusion of ISO into the blood for the treatment of heart diseases.     

Swainsonine production in fed-batch fermentations of Metarhizium anisopliae

Summary Extended and enhanced production of swainsonine was achieved from fed-batch fermentations of the fungus Metarhizium anisopliae. A complex medium based on oatmeal extract was intermittently fed with D-glucose and/or lysine. Swainsonine titres were improved eleven-fold and the duration of production extended was from 240 to 550 hours compared with a batch culture under the same conditions.     

Enhanced biodegradation of phenanthrene using different inoculum types in a microbial fuel cell

Environmental pollution by petroleum hydrocarbons from contaminated groundwater and soils is a serious threat to human health. Microbial fuel cells (MFCs) could be employed in the treatment of these recalcitrant pollutants with concomitant bioelectricity generation. In this study, the use of MFCs in biodegradation of phenanthrene, a model hydrocarbon, was investigated with respect to its biodegradation rate, biodegradation efficiency, and power production using a range of inocula (Shewanella oneidensis MR1 14063, Pseudomonas aeruginosa NCTC 10662, mixed cultures, and combinations thereof). All the inocula showed high potentials for phenanthrene degradation with a minimum degradation efficiency of 97%. The best overall performing inoculum was anaerobically digested sludge supplemented with P. aeruginosa NCTC 10662, having a degradation rate, maximum power density and chemical oxygen demand removal efficiency of 27.30 μM/d, 1.25 mW/m² and 65.6%, respectively. Adsorption of phenanthrene on the carbon anode was also investigated; it conformed to a Type II adsorption isotherm and could be modelled using a modified Brunauer, Emmett and Teller model with a maximum monolayer capacity of 0.088 mg/cm². This work highlights the possibility of using MFCs to achieve high degradation rates of phenanthrene through co‐metabolism and could potentially be used as a replacement of permeable reactive barriers for remediation of hydrocarbon‐contaminated groundwater.     

Effect of mannan oligosaccharide elicitor and ferulic acid on enhancement of laccases production in liquid cultures of basidiomycetes

The effects of mannan oligosaccharides preparation (MO), as elicitor, and ferulic acid inducer for enhancement in laccases production in liquid cultures of three strains of basidiomycetes, Pycnoporus sanguineus, Coriolopsis polyzona and Pleurotus ostreatus was studied using a full factorial 3² experimental design. MO, either individually or combined with ferulic acid, enhanced laccases levels in the three different strains of the white-rot fungi. The enhancement of laccases production was species specific with the highest increase in liquid cultures of P. sanguineus (88-fold) followed by P. ostreatus (3-fold) and C. polyzona (2-fold). Separate additions of 75 mg/l of MO to the cultures of P. sanguineus and P. ostreatus caused the increase while a combined addition of 150 mg/l of MO and 1 mM ferulic acid resulted in the optimal production of laccases in the cultures of C. polyzona.     

The role of riboflavin in decolourisation of Congo red and bioelectricity production using <Emphasis Type="Italic">Shewanella oneidensis</Emphasis>-MR1 under MFC and non-MFC conditions

Dissimilatory metal reducing bacteria can exchange electrons extracellularly and hold great promise for their use in simultaneous wastewater treatment and electricity production. This study investigated the role of riboflavin, an electron carrier, in the decolourisation of Congo red in microbial fuel cells (MFCs) using Shewanella oneidensis MR-1 as a model organism. The contribution of the membrane-bound protein MtrC to the decolourisation process was also investigated. Within the range of riboflavin concentrations tested, 20 µM was found to be the best with >95% of the dye (initial concentration 200 mg/L) decolourised in MFCs within 50 h compared to 90% in the case where no riboflavin was added. The corresponding maximum power density was 45 mW/m². There was no significant difference in the overall decolourisation efficiencies of Shewanela oneidensis MR-1 ΔMtrC mutants compared to the wild type. However, in terms of power production the mutant produced more power (P_max 76 mW/m²) compared to the wild type (P_max 46 mW/m²) which was attributed to higher levels of riboflavin secreted in solution. Decolourisation efficiencies in non-MFC systems (anaerobic bottles) were similar to those under MFC systems indicating that electricity generation in MFCs does not impair dye decolourisation efficiencies. The results suggest that riboflavin enhances both decolourisation of dyes and simultaneous electricity production in MFCs.     

Application of fluorescent indicators to analyse intracellular calcium and morphology in filamentous fungi

A novel staining and quantification method to investigate changes in intracellular calcium levels [Ca²⁺]_i and morphology in filamentous fungus is presented. Using a simple protocol, two fluorescent dyes, Fluo-4-AM and Cell trace calcein red-orange-AM were loaded into the filamentous fungus Penicillium chrysogenum. The present study investigates the applicability of using Ca²⁺-sensitive dye to quantify and image [Ca²⁺]_i in P. chrysogenum cultures chosen for its potential as an experimental system to study Ca²⁺ signalling in elicited cultures. The dye loading was optimised and investigated at different pH loading conditions. It was observed that the fluorophore was taken up throughout the hyphae, retaining cell membrane integrity and no dye compartmentalisation within organelles was observed. From the fluorescent plate-reader studies a significant rise (p < 0.001) in the relative fluorescence levels corresponding to [Ca²⁺]_i levels in the hyphae was observed when challenged with an elicitor (mannan oligosaccharide, 150 mg L^?1) which was dependent upon extracellular calcium. Concurrently a novel application of dye-loaded hyphae for morphological analysis was also examined using the imaging software Filament Tracer (Bitplane). Essential quantitative mycelial information including the length and diameter of the segments and number of branch points was obtained using this application based on the three-dimensional data.