Modelling intraspecific resting egg shape variation in a freshwater fairy shrimp Tanymastix stagnalis (L., 1758) (Crustacea, Branchiopoda)

The shape of the resting eggs of a large branchiopod crustacean, the Anostraca Tanymastix stagnalis , is represented very accurately by analytical expressions. The occurrence of atypical shape of some T. stagnalis eggs may be viewed as a simple change of the analytical expression describing the usual egg shape. Their unusual shape may be explained by a higher embryo volume within an envelope of a given size. Biological implications are briefly discussed and hypothesized in an evolutionary point of view.  © 2007 The Linnean Society of London, Biological Journal of the Linnean Society , 2007, 90 , 55–60.     

Bench-scale fermentation of Trichoderma viride on wastewater sludge: Rheology, lytic enzymes and biocontrol activity

Conidiation and lytic enzyme production by Trichoderma viride at different solids concentration of pre-treated municipal wastewater sludge was examined in a 15-L fermenter. The maximum conidia concentration (5.94 × 10⁷ CFU mL⁻¹ at 96 h) was obtained at 30 g L⁻¹ suspended solids. The maximum lytic enzyme activities were achieved around 12–30 h of fermentation. Bioassay against a fungal phytopathogen, Fusarium sp. showed maximum activity in the sample drawn around 96 h of fermentation at 30 g L⁻¹ suspended solids concentration. Entomotoxicity against spruce budworm larvae showed maximum value ≈17290 SBU μL⁻¹ at 30 g L⁻¹ suspended solids concentration at the end of fermentation (96 h). Plant bioassay showed dual action of T. viride, i.e., disease prevention and growth promotion. The rheological analyses of fermentation sludges showed the pseudoplastic behaviour. In order to maintain required dissolved oxygen concentration ≥30%, the agitation and aeration requirements significantly increased at 35 g L⁻¹ compared to 30 and 25 g L⁻¹. The oxygen uptake rate and volumetric oxygen mass transfer coefficient, k_La at 35 g L⁻¹ did not increase in comparison to 30 g L⁻¹ due to rheological complexity of the broth during fermentation. Thus, the successful fermentation operation of the biocontrol fungus T. viride is a rational indication of its potential for mass-scale production for agriculture and forest sector as a biocontrol agent.     

Influence of pH Control Agents on Entomotoxicity Potency of Bacillus thuringiensis using Different Raw Materials

Summary In this investigation, ammonium hydroxide and acetic acid were used as pH control agents during Bacillus thuringiensis (Bt) fermentation in a pilot scale fermentor (150-l) employing two secondary wastewater sludges from two different wastewater treatment plants (CUQS and JQS) and semi-synthetic soybean meal medium as raw materials. Regardless of the cultivation medium, a substantial increase in total cell count, spore count, protease activity and entomotoxicity was achieved when the pH of the culture was controlled using NH₄OH/CH₃COOH. At harvest, total cell count increased by almost 17%, 33% and 25%; protease activity was enhanced by 12%, 33% and 53% and maximal spore count augmented by almost 28%, 48% and 33% in CUQS, JQS and soybean medium, respectively. Entomotoxicity potency was improved by 22%, 21% and 14% in CUQS, JQS and soybean medium, respectively compared to results obtained with NaOH/H₂SO₄ as pH control agents. A higher entomotoxicity was also observed using sludge compared to the soybean medium. This improvement of the Bt process performance was a consequence of the addition of rapidly utilizable carbon and nitrogen source through pH control, which stimulated endotoxin production in the crystal and enhanced sporulation.     

Biotic conversion of sulphate to sulphide and abiotic conversion of sulphide to sulphur in a microbial fuel cell using cobalt oxide octahedrons as cathode catalyst

Varying chemical oxygen demand (COD) and sulphate concentrations in substrate were used to determine reaction kinetics and mass balance of organic matter and sulphate transformation in a microbial fuel cell (MFC). MFC with anodic chamber volume of 1 L, fed with wastewater having COD of 500 mg/L and sulphate of 200 mg/L, could harvest power of 54.4 mW/m², at a Coulombic efficiency of 14%, with respective COD and sulphate removals of 90 and 95%. Sulphide concentration, even up to 1500 mg/L, did not inhibit anodic biochemical reactions, due to instantaneous abiotic oxidation to sulphur, at high inlet sulphate. Experiments on abiotic oxidation of sulphide to sulphur revealed maximum oxidation taking place at an anodic potential of −200 mV. More than 99% sulphate removal could be achieved in a MFC with inlet COD/sulphate of 0.75, giving around 1.33 kg/m³ day COD removal. Bioelectrochemical conversion of sulphate facilitating sulphur recovery in a MFC makes it an interesting pollution abatement technique.

     

Induced production of chitinase to enhance entomotoxicity of Bacillus thuringiensis employing starch industry wastewater as a substrate

Induced production of chitinase during bioconversion of starch industry wastewater (SIW) to Bacillus thuringiensis var. kurstaki HD-1 (Btk) based biopesticides was studied in shake flask as well as in computer-controlled fermentors. SIW was fortified with different concentrations (0%; 0.05%; 0.1%; 0.2%; 0.3% w/v) of colloidal chitin and its consequences were ascertained in terms of Btk growth (total cell count and viable spore count), chitinase, protease and amylase activities and entomotoxicity. At optimum concentration of 0.2% w/v colloidal chitin, the entomotoxicity of fermented broth and suspended pellet was enhanced from 12.4 × 10⁹ (without chitin) to 14.4 × 10⁹ SBU/L and from 18.2 × 10⁹ (without chitin) to 25.1 × 10⁹ SBU/L, respectively. Further, experiments were conducted for Btk growth in a computer-controlled 15 L bioreactor using SIW as a raw material with (0.2% w/v chitin, to induce chitinase) and without fortification of colloidal chitin. It was found that the total cell count, spore count, delta-endotoxin concentration (alkaline solubilised insecticidal crystal proteins), amylase and protease activities were reduced whereas the entomotoxicity and chitinase activity was increased with chitin fortification. The chitinase activity attained a maximum value at 24 h (15 mU/ml) and entomotoxicity of suspended pellet reached highest (26.7 × 10⁹ SBU/L) at 36 h of fermentation with chitin supplementation of SIW. In control (without chitin), the highest value of entomotoxicity of suspended pellet (20.5 × 10⁹ SBU/L) reached at 48 h of fermentation. A quantitative synergistic action of delta-endotoxin concentration, spore concentration and chitinase activity on the entomotoxicity against spruce budworm larvae was observed.     

Impact of different pH control agents on biopesticidal activity of<Emphasis Type="Italic"> Bacillus thuringiensis</Emphasis> during the fermentation of starch industry wastewater

Different pH control agents (NaOH/H₂SO₄—SodSulp, NaOH/CH₃COOH—SodAcet, NH₄OH/CH₃COOH—AmmoAcet and NH₄OH/H₂SO₄—AmmoSulp) were used to investigate their effects on growth, enzyme production (alkaline protease and amylase), and entomotoxicity of Bacillus thuringiensis var. kurstaki HD-1 (Btk) against eastern spruce budworm larvae (Choristoneura fumiferana) using starch industry wastewater (SIW) as a raw material in a 15-l fermentor. AmmoSulp and SodSulp were found to be the best pH control agents for alkaline protease and amylase production, respectively; whereas, the fermented broth obtained by using SodAcet as pH control agents recorded the highest delta-endotoxin production of 1043.0 mg/l and entomotoxicity value 18.4 × 10⁹ SBU/l. Entomotoxicity of re-suspended centrifuged pellet in one-tenth of original volume in case of SodAcet as pH control agents was 26.7 × 10⁹ SBU/l and was the highest value compared to three other pH control agents.     

Diversity of mitochondrial large subunit rDNA haplotypes of Glomus intraradices in two agricultural field experiments and two semi‐natural grasslands

Glomus intraradices, an arbuscular mycorrhizal fungus (AMF), is frequently found in a surprisingly wide range of ecosystems all over the world. It is used as model organism for AMF and its genome is being sequenced. Despite the ecological importance of AMF, little has been known about their population structure, because no adequate molecular markers have been available. In the present study we analyse for the first time the intraspecific genetic structure of an AMF directly from colonized roots in the field. A recently developed PCR‐RFLP approach for the mitochondrial rRNA large subunit gene (mtLSU) of these obligate symbionts was used and complemented by sequencing and primers specific for a particularly frequent mtLSU haplotype. We analysed root samples from two agricultural field experiments in Switzerland and two semi‐natural grasslands in France and Switzerland. RFLP type composition of G. intraradices (phylogroup GLOM A‐1) differed strongly between agricultural and semi‐natural sites and the G. intraradices populations of the two agricultural sites were significantly differentiated. RFLP type richness was higher in the agricultural sites compared with the grasslands. Detailed sequence analyses which resolved multiple sequence haplotypes within some RFLP types even revealed that there was no overlap of haplotypes among any of the study sites except between the two grasslands. Our results demonstrate a surprisingly high differentiation among semi‐natural and agricultural field sites for G. intraradices. These findings will have major implications on our views of processes of adaptation and specialization in these plant/fungus associations.     

Sorption and precipitation of metals in activated sludge

A conceptual model describing the relative roles of sorption and precipitation processes for metals in solid-solution suspensions is presented. The model performance is demonstrated using experimental data on sorption and precipitation of metals in samples of activated sludge mixed liquor. Based on the experimental results presented here, it appears that, at total metal and mixed liquor suspended solids concentrations and pH values generally encountered in full-scale municipal (or combined municipal/industrial) activated sludge systems, metals are primarily removed by sorption processes.