Lipase-catalyzed dimethyl adipate synthesis: Response surface modeling and kinetics

Dimethyl adipate (DMA) was synthesized by immobilized Candida antarctica lipase B-catalyzed esterification of adipic acid and methanol. To optimize the reaction conditions of ester production, response surface methodology was applied, and the effects of four factors namely, time, temperature, enzyme concentration, and molar ratio of substrates on product synthesis were determined. A statistical model predicted that the maximum conversion yield would be 97.6%, at the optimal conditions of 58.5°C, 54.0 mg enzyme, 358.0 min, and 12:1 molar ratio of methanol to adipic acid. The R² (0.9769) shows a high correlation between predicted and experimental values. The kinetics of the reaction was also investigated in this study. The reaction was found to obey the ping-pong bi-bi mechanism with methanol inhibition. The kinetic parameters were determined and used to simulate the experimental results. A good quality of fit was observed between the simulated and experimental initial rates.     

Anaerobic fermentation of gelatinized sago starch-derived sugars to acetone—1-butanol—Ethanol solvent byClostridium acetobutylicum

A study of the kinetics and performance of solvent-yielding batch fermentation of individual sugars and their mixture derived from enzymic hydrolysis of sago starch byClostridium acetobutylicum showed that the use of 30 g/L gelatinized sago starch as the sole carbon source produced 11.2 g/L total solvent,i.e. 1.5–2 times more than with pure maltose or glucose used as carbon sources. Enzymic pretreatment of gelatinized sago starch yielding maltose and glucose hydrolyzates prior to the fermentation did not improve solvent production as compared to direct fermentation of gelatinized sago starch. The solvent yield of direct gelatinized sago starch fermentation depended on the activity and stability of amylolytic enzymes produced during the fermentation. The pH optima for α-amylase and glucoamylase were found to be at 5.3 and 4.0–4.4, respectively. α-Amylase showed a broad pH stability profile, retaining more than 80% of its maximum activity at pH 3.0–8.0 after a 1-d incubation at 37°C. SinceC. acetobutylicum α-amylase has a high activity and stability at low pH, this strain can potentially be employed in a one-step direct solvent-yielding fermentation of sago starch. However, theC. acetobutylicum glucoamylase was only stable at pH 4–5, maintaining more than 90% of its maximum activity after a 1-d incubation at 37°C.     

Medium optimization for chitinase production from Trichoderma virens using central composite design

Medium development for chitinase production by Trichoderma virens was first carried out using conventional method of one-factor-at-a-time. The medium was further optimized using Central Composite Design in which response surface was generated later from the derived model. An experimental design of four variables including various initial pH values, chitin, ammonium sulphate, and methanol concentrations were created using Design Expert® Software, Version 6.0. The design consists of 30 experiments, which include 6 replicates at center points. The optimal value for each variable are 3.0 g/L, chitin; 0.1 g/L, ammonium sulphate; 0.4% (v/v), methanol; and initial pH, 4.0 with predicted chitinase activity of 0.1495 U/mL. These predicted parameters were tested in the laboratory and the final chitinase activity obtained was 0.1471 U/mL, which is almost reaching the predicted value. The optimal medium design showed an improvement of chitinase activity of 80.9% compared to activity obtained from the original Absidia medium composition.     

Optimization of metallo-keratinase production by Pseudomonas sp. LM19 as a potential enzyme for feather waste conversion

Locally isolated bacterium Pseudomonas sp. LM19, a metallo-keratinase producer was used to hydrolyze the highly rigid keratin recalcitrant in this study. The production of crude keratinase by Pseudomonas sp. LM19 is influenced by both physical and nutritional parameters. The highest keratinase activity of 127?U/ml (2.15-fold) was observed in feather meal medium supplemented with fructose and peptone at a C/N ratio of 40. The optimum pH and temperature for keratinase production were found to be pH 8 and 30?°C, using 1% (w/v) feather as substrate. The degradation rate of the feathers was increased 2.4-fold at optimized physical and nutritional conditions. Feather degradation by Pseudomonas sp. LM19 led to the production of free amino acids such as arginine, glycine, leucine, and serine. The information on the production of keratinase by Pseudomonas sp. LM19 obtained from this study warrants further research for possible commercial application.     

A potential resource for bioconversion of domestic wastewater sludge

Twenty seven filamentous fungal strains representing five genera; Aspergillus, Penicillium, Trichoderma, Myriodontium and Pleurotus were isolated from four sources; domestic wastewater sludge cake (SC) from IWK (Indah Water Konsortium) wastewater treatment plant, palm oil mill effluent compost from Sri Ulu palm Oil Processing Mill, compost of plant debris, and fungal fruiting bodies from a rotten wood stump. Thirty-three strains/isolates were tested for their ability to convert domestic wastewater sludge into compost by assessing biomass production and growth rate on sludge enriched media. The strains/isolates Aspergillus niger, SS-T2008, WW-P1003 and RW-P1 512 produced the highest dry biomass at higher sludge supplemented culture media from their respective group (Aspergillus, Trichoderma, Penicillium and Basidiomycetes, respectively). This implied these strains are better adapted for growth at higher sludge rich substances, and subsequently may be efficient in bioconversion/biodegradation of sludge. The fungi isolated from ecological closely related sources were more amendable to adaptation in a sludge rich culture media.     

Growth of Bifidobacterium longum BB536 in medida (fermented cereal porridge) and their survival during refrigerated storage

AIMS: To develop medida, a Sudanese fermented thin porridge as a probiotic dietary adjunct with high total solids. METHODS AND RESULTS: Fifteen per cent brown rice flour of 2-day-old malted paddy and skim milk were used for formulation. Levels of 2.25, 4.5 and 10% of added skim milk were studied. The initial pH was 6.7 and fermentation was run to a final pH of 4.4 using culture of Bifidobacterium longum BB 536. The highest count of 9.9 +/- 0.07 log CFU ml(-1) was obtained with 10% of added skim milk. The total solids at this level was 21%, 11.1 times more compared with the traditionally prepared medida using un-malted brown rice. The viscosity was low and the flowing characteristic was stable. The final productions of lactic and acetic acids were 56.8 +/- 0.80 and 56.3 +/- 2.00 mumol ml(-1) respectively. The high ratio of acetate to lactate decreased as fermentation continues due to the increase in the rate of lactate production. Under refrigerated storage the count of B. longum BB 536 remained relatively stable during the first week (9.7 +/- 0.10 log CFU ml(-1)) then subsequently decreased by 0.9 log CFU ml(-1) in the following week. CONCLUSIONS: The results of this study demonstrated that fermented medida made from malted brown rice is a suitable food system for the delivery of B. longum BB 536 with a relatively stable shelf life. SIGNIFICANCE AND IMPACT OF THE STUDY: The present study is the first attempt to prepare fermented medida from malted flour with bifidobacteria having the highest total solids while still maintaining the flowing characteristics. Previous studies on medida did not go beyond the use of alpha amylase enzyme and pure lactic acid bacteria isolates from spontaneously fermented dough.     

Production of cellulases and xylanase by Aspergillus fumigatus SK1 using untreated oil palm trunk through solid state fermentation

Direct utilization of untreated oil palm trunk (OPT) for cellulases and xylanase production by Aspergillus fumigatus SK1 was conducted under solid-state fermentation (SSF). The highest activities of extracellular cellulases and xylanases were produced at 80% moisture level, initial pH 5.0, 1 × 10⁸ spore/g (inoculum) with 125 μm of OPT as sole carbon source. The cellulases and xylanase activities obtained were 54.27, 3.36, 4.54 and 418.70 U/g substrates for endoglucanase (CMCase), exoglucanase (FPase), β-glucosidase and xylanase respectively. The crude cellulases and xylanase required acidic condition to retain their optimum activities (pH 4.0). Crude cellulases and xylanase were more stable at 40 °C compared to their optimum activities conditions (60 °C for FPase and 70 °C for CMCase, β-glucosidase and xylanase). SDS-PAGE and zymogram analysis showed that Aspergillus fumigatus SK1 could secrete cellulases (endoglucanase, exoglucanase and β-glucosidase), xylanase and protease. Enzymatic degradation of alkaline treated OPT with concentrated crude cellulases and xylanases resulted in producing polyoses.     

Acetone–Butanol–Ethanol Production by Clostridium acetobutylicum ATCC 824 Using Sago Pith Residues Hydrolysate

Sago pith residues (58 % starch, 23 % cellulose, 9.2 % hemicellulose, and 4 % lignin) are one of the abundant lignocellulosic residues generated after starch extraction process in sago mill. In this study, fermentable sugars from enzymatic hydrolysis of sago pith residues were converted to acetone–butanol–ethanol (ABE) by Clostridium acetobutylicum ATCC 824. With an initial concentration of 30 g/L of concentrated sago pith residues hydrolysate containing 23 g/L of glucose and 4.58 g/L of cellobiose, 4.22?±?0.17 g/L of ABE were produced after 72 h of fermentation with yield and productivity of 0.20 g/g glucose and 0.06 g/L/h, respectively. Results are in agreement when synthetic glucose was used as a carbon source. Increasing sago pith residue hydrolysate to 50 g/L (containing 40 g/L glucose) and supplementing with 0.5 g/L yeast extract, approximately 8.84?±?0.20 g/L of ABE (5.41?±?0.10 g/L of butanol) were produced with productivity and yield of 0.12 g/L/h and 0.30 g/g glucose respectively, providing a 52 % improvement.     

Utilization of oil palm decanter cake for cellulase and polyoses production

The abundance of oil palm decanter cake (OPDC) is a problem in oil palm mills. However, this lignocellulosic biomass can be utilized for cellulase and polyoses production. The effectiveness of chemical and physical pretreatment in reducing the lignin content was studied by saccharification using a Celluclast 1.5 L and scanning electron microscope. Physicochemical pretreatment of OPDC with 1% (w/v) NaOH and autoclaving at 121°C for 20 min increased potential polyoses produced to 52.5% and removed 28.7% of the lignin content. The optimized conditions for cellulase production by a locally isolated fungus were a time of 120 h, a substrate of untreated OPDC, a spore concentration of 1 × 10⁷ spore/mL, a temperature of 30°C, and a pH between 7.0 and 7.5. Trichoderma asperellum UPM1 produced carboxymethylcellulase (CMCase), ??-glucosidase and filter paper activity (FPase) in the following concentrations: 17.35, 0.53, and 0.28 U/mL, respectively. Aspergillus fumigatus UPM2 produced the CMCase, ??-glucosidase and FPase in the following amounts: 10.93, 0.76, and 0.24 U/mL. The cellulases from T. asperellum UPM1 produced 2.33 g/L of polyoses and the cellulases from A. fumigatus UPM2 produced 4.37 g/L of polyoses.