Mineralization of 2,4-dichlorophenoxyacetic acid (2,4-D) in soil inoculated with Pseudomonas cepacia DBO1(pRO101), Alcaligenes eutrophus AEO106(pRO101) and Alcaligenes eutrophus JMP134(pJP4): effects of inoculation level and substrate concentration

Mineralization of 2,4-dichlorophenoxyacetic acid (2,4-D) by two Alcaligenes eutrophus strains and one Pseudomonas cepacia strain containing the 2,4-D degrading plasmids pJP4 or pRO101 (=pJP4::Tn1721) was tested in 50 g (wet wt) samples of non-sterile soil. Mineralization was measured as ¹⁴C-CO₂evolved during degradation of uniformly-ring-labelled ¹⁴C-2,4-D. When the strains were inoculated to a level of approximately 10⁸ CFU/g soil, between 20 and 45% of the added 2,4-D (0.05 ppm, 10 ppm or 500 ppm) was mineralized within 72 h. Mineralization of 0.05 ppm and 10 ppm, 2,4-D by the two A. eutrophus strains was identical and rapid whereas mineralization by P. cepacia DBO1(pRO101) occurred more slowly. In contrast, mineralization of 500 ppm 2,4-D by the two A. eutrophus strains was very slow whereas mineralization by P. cepacia DBO1 was more rapid. Comparison of 2,4-D mineralization at different levels of inoculation with P. cepacia DBO1(pRO101) (6×10⁴, 6×10⁶ and 1×10⁸ CFU/g soil) revealed that the maximum mineralization rate was reached earlier with the high inoculation levels than with the low level. The kinetics of mineralization were evaluated by nonlinear regression analysis using five different models. The linear or the logarithmic form of a three-half-order model were found to be the most appropriate models for describing 2,4-D mineralization in soil. In the cases in which the logarithmic form of the three-half-order model was the most appropriate model we found, in accordance with the assumptions of the model, a significant growth of the inoculated strains.Abbreviations 2,4-D 2,4-dichlorophenoxyacetic acid - CFU colony forming units - PTYG peptone, tryptone, yeast & glucose - DPM disintegrations per minute     

Inhibition of Real-Time PCR in DNA Extracts from Aquifer Sediment

Variation in inhibition of real-time PCR was investigated with DNA extracts from 50 aquifer sediment core samples of 5 cm length collected through a 2.5 meter vertical profile across a landfill leachate plume. The inhibition was quantified using an internal control of the green fluorescent protein ( gfp ) gene, which was spiked into the real-time PCR reactions. The inhibition was investigated at two gfp gene concentrations: at 1.7 · 10 ⁷ gfp gene copies/g sediment (5.1 · 10 ⁴ gfp gene copies/PCR reaction) and at 1.7 · 10 ⁵ gfp gene copies/g sediment (5.1 · 10 ² gfp gene copies/PCR reaction). Despite the low TOC content of the sediment (average 0.4 mg C/g dw) the average real-time PCR response was partially inhibited, compared to a reference (pure water), at both high and low gfp concentrations. The relative amplification (reference = 1) was 0.85 ± 0.20 (high) and 0.66 ± 0.23 (low), showing significantly (P < 0.05) stronger inhibition at the lower target gene concentration. The inhibition of the real-time PCR did not show a systematic variation in the vertical profile related to plume position but variations were significant on a small scale of 5–15 cm depth intervals. One of the 50 samples failed to produce a signal with either concentration of the gfp internal control and three other samples inhibited real-time PCR at both high and low gfp concentration. These 4 samples, which were the samples with the highest inhibition, were the only DNA extracts with a visible brown colouration, indicating contents of humic-like substances. Elevated absorbance at 400 nm of these samples also indicated that humic-like substances were responsible for inhibition. However, other factors not associated with either absorbance or TOC may have contributed to the inhibition in less inhibited samples since the variation in real-time PCR response could not be sufficiently explained by absorbance or TOC. The results of this study suggest that an internal control is needed in real-time PCR reactions with DNA from environmental samples due to variation in inhibition to correctly quantify the number of target genes, especially at low target gene concentrations, when dilution of DNA extracts is not practical.     

Effect of weight loss and exercise on angiogenic factors in the circulation and in adipose tissue in obese subjects

Background:

Vascular growth is a prerequisite for adipose tissue (AT) development and expansion. Some AT cytokines and hormones have effects on vascular development, like vascular endothelial growth factor (VEGF‐A), angiopoietin (ANG‐1), ANG‐2 and angiopoietin‐like protein‐4 (ANGPTL‐4).

Methods:

In this study, the independent and combined effects of diet‐induced weight loss and exercise on AT gene expression and proteins levels of those angiogenic factors were investigated. Seventy‐nine obese males and females were randomized to: 1. Exercise‐only (EXO; 12‐weeks exercise without diet‐restriction), 2. Hypocaloric diet (DIO; 8‐weeks very low energy diet (VLED) + 4‐weeks weight maintenance diet) and 3. Hypocaloric diet and exercise (DEX; 8‐weeks VLED + 4‐weeks weight maintenance diet combined with exercise throughout the 12 weeks). Blood samples and fat biopsies were taken before and after the intervention.

Results:

Weight loss was 3.5 kg in the EXO group and 12.3 kg in the DIO and DEX groups. VEGF‐A protein was non‐significantly reduced in the weight loss groups. ANG‐1 protein levels were significantly reduced 22‐25% after all three interventions (P < 0.01). The ANG‐1/ANG‐2 ratio was also decreased in all three groups (P < 0.05) by 27‐38%. ANGPTL‐4 was increased in the EXO group (15%, P < 0.05) and 9% (P < 0.05) in the DIO group. VEGF‐A, ANG‐1, and ANGPTL‐4 were all expressed in human AT, but only ANGPTL‐4 was influenced by the interventions.

Conclusions:

Our data show that serum VEGF‐A, ANG‐1, ANG‐2, and ANGPTL‐4 levels are influenced by weight changes, indicating the involvement of these factors in the obese state. Moreover, it was found that weight loss generally was associated with a reduced angiogenic activity in the circulation.     

Multi-Site N-glycan mapping study 1: Capillary electrophoresis – laser induced fluorescence

An international team that included 20 independent laboratories from biopharmaceutical companies, universities, analytical contract laboratories and national authorities in the United States, Europe and Asia was formed to evaluate the reproducibility of sample preparation and analysis of N-glycans using capillary electrophoresis of 8-aminopyrene-1,3,6-trisulfonic acid (APTS)-labeled glycans with laser induced fluorescence (CE-LIF) detection (16 sites) and ultra high-performance liquid chromatography (UHPLC, 12 sites; results to be reported in a subsequent publication). All participants used the same lot of chemicals, samples, reagents, and columns/capillaries to run their assays. Migration time, peak area and peak area percent values were determined for all peaks with >0.1% peak area. Our results demonstrated low variability and high reproducibility, both, within any given site as well across all sites, which indicates that a standard N-glycan analysis platform appropriate for general use (clone selection, process development, lot release, etc.) within the industry can be established.     

Enhancement of AA-amyloid formation in mice by transthyretin amyloid fragments and polyethylene glycol

The mechanism behind amyloid formation is unknown in all types of amyloidosis. Several substances can enhance amyloid formation in animal experiments. To induce secondary systemic amyloid (AA-type amyloid) formation, we injected silver nitrate into mice together with either amyloid fibrils obtained from patients with familial polyneuropathy (FAP) type I or polyethylene glycol (PEG). Mice injected with silver nitrate only served as controls. Amyloid deposits were detectable at day 3 in animals injected with amyloid fibrils and in those injected with PEG, whereas in control mice, deposits were not noted before day 12. Our results indicate that amyloid fibrils from FAP patients and even a non-sulfate containing polysaccharide (PEG) have the potential to act as amyloid-enhancing factors.     

Genetic and behavioural evidence for a city-wide supercolony of the invasive Argentine ant Linepithema humile (Mayr) (Hymenoptera: Formicidae) in southeastern Australia

The success of invasive ants is frequently attributed to genetic and behavioural shifts in colony structure during or after introduction. The Argentine ant ( Linepithema humile ), a global invader, differs in colony genetic structure and behaviour between native populations in South America and introduced populations in Europe, Japan, New Zealand and North America. However, little is known about its colony structure in Australia. We investigated the genetic structure and behaviour of L. humile across Melbourne, Victoria by quantifying variation at four microsatellite loci and assaying intraspecific aggression at neighbourhood (30–200 m), fine (1–3.3 km) and regional (5–82 km) spatial scales. Hierarchical analyses across these scales revealed that most genetic variation occurred among workers within nests (∼98%). However, although low genetic differentiation occurred among workers between nests at the fine and regional scales (∼2%), negligible differentiation was detected among workers from neighbouring nests. Spatial genetic autocorrelation analysis confirmed that neighbouring nests were genetically more similar to each other. Lack of aggression within and across these scales supported the view that L. humile is unicolonial and forms a large supercolony across Melbourne. Comparisons of genetic structure of L. humile among single nests sampled from Adelaide, Brisbane, Hobart and Perth with Melbourne showed no greater levels of genetic differentiation or dissimilar spatial structure, suggesting an Australia-wide supercolony.     

Real time in situ microscopy for animal cell-concentration monitoring during high density culture in bioreactor

An in situ microscope (ISM) device is utilised in this study to monitor hybridoma cells concentration in a stirred bioreactor. It generates images by using pulsed illumination of the liquid broth synchronised with the camera frame generation to avoid blur from the cell's motion. An appropriate image processing isolates the sharp objects from the blurred ones that are far from the focal plane. As image processing involves several parameters, this paper focuses on the robustness of the results of the cells counting. This stage determines the applicability of the measuring device and has seldom been tackled in the presentations of ISM devices. Calibration is secondly performed for assessing the cell-concentration from the cell automated numeration provided by the ISM. Flow cytometry and hemacytometer chamber were used as reference analytical methods. These measures and the output of the image processing allow estimating a single calibration parameter: the reference volume per image equal to 1.08 x 10(-6) mL. In these conditions, the correlation coefficient between both reference and ISM data sets becomes equal to 0.99. A saturation of this system during an ultrasonic wave perfusion phase that deeply changes the culture conditions is observed and discussed. Principal component analysis (PCA) is used to undergo the robustness study and the ISM calibration step.