Nitrogen and oxygen isotopes in nitrate in the groundwater and surface water discharge from two rural catchments: implications for nitrogen loading to coastal waters

In Prince Edward Island, Canada, widespread intensive potato production has contributed to elevated nitrate concentrations in groundwater and streams, and eutrophic or anoxic conditions occur regularly in several estuarine systems. In this research, the stable isotopes of nitrogen and oxygen in nitrate in intertidal groundwater discharge and stream water were used, in conjunction with water quality and quantity data and land use information, to better understand the characteristics of nitrate delivered to two small estuaries with contrasting land use in their contributory catchments. Most of the water samples collected during the two-year study had isotopic signatures that fell in the range expected for nitrate derived from ammonium-based fertilizers (26.5 % of the samples) or in the overlapping range formed between ammonium-based fertilizers and nitrate derived from soil (64 % of the samples). Overall, isotopic signatures spanned over relatively narrow ranges, and correlations with other water quality parameters, or catchment characteristics, were weak. Nitrate in groundwater discharge and surface water in the Trout River catchment exhibited significantly different isotopic signatures only for the nitrogen isotope, while in the McIntyre Creek catchment groundwater discharge and surface water had similar isotopic signatures. When the isotopic results for the waters from the two catchments were compared, the surface waters were found to be similar, while the isotopic signatures of nitrate in groundwater were distinct only for the nitrogen isotope. Denitrification in the two study catchments was not evident based on the isotopic results for nitrate; however, in the case of the Trout River catchment, where a small freshwater pond exists, an average nitrate load reduction of 14 % was inferred based on a comparison of nitrate loads entering and leaving the pond. Overall, it appears that natural attenuation processes, occurring either in the streams or groundwater flow systems, do not significantly reduce nitrate loading to these estuaries.     

Domain organization of membrane‐bound factor VIII

Factor VIII (FVIII) is the blood coagulation protein which when defective or deficient causes for hemophilia A, a severe hereditary bleeding disorder. Activated FVIII (FVIIIa) is the cofactor to the serine protease factor IXa (FIXa) within the membrane‐bound Tenase complex, responsible for amplifying its proteolytic activity more than 100,000 times, necessary for normal clot formation. FVIII is composed of two noncovalently linked peptide chains: a light chain (LC) holding the membrane interaction sites and a heavy chain (HC) holding the main FIXa interaction sites. The interplay between the light and heavy chains (HCs) in the membrane‐bound state is critical for the biological efficiency of FVIII. Here, we present our cryo‐electron microscopy (EM) and structure analysis studies of human FVIII‐LC, when helically assembled onto negatively charged single lipid bilayer nanotubes. The resolved FVIII‐LC membrane‐bound structure supports aspects of our previously proposed FVIII structure from membrane‐bound two‐dimensional (2D) crystals, such as only the C2 domain interacts directly with the membrane. The LC is oriented differently in the FVIII membrane‐bound helical and 2D crystal structures based on EM data, and the existing X‐ray structures. This flexibility of the FVIII‐LC domain organization in different states is discussed in the light of the FVIIIa–FIXa complex assembly and function. © 2013 Wiley Periodicals, Inc. Biopolymers 99: 448–459, 2013.     

Intracellular Cytokine Staining and Flow Cytometry: Considerations for Application in Clinical Trials of Novel Tuberculosis Vaccines

Intracellular cytokine staining combined with flow cytometry is one of a number of assays designed to assess T-cell immune responses. It has the specific advantage of enabling the simultaneous assessment of multiple phenotypic, differentiation and functional parameters pertaining to responding T-cells, most notably, the expression of multiple effector cytokines. These attributes make the technique particularly suitable for the assessment of T-cell immune responses induced by novel tuberculosis vaccines in clinical trials. However, depending upon the particular nature of a given vaccine and trial setting, there are approaches that may be taken at different stages of the assay that are more suitable than other alternatives. In this paper, the Tuberculosis Vaccine Initiative (TBVI) TB Biomarker Working group reports on efforts to assess the conditions that will determine when particular assay approaches should be employed. We have found that choices relating to the use of fresh whole blood or peripheral blood mononuclear cells (PBMC) and frozen PBMC; use of serum-containing or serum-free medium; length of stimulation period and use of co-stimulatory antibodies can all affect the sensitivity of intracellular cytokine assays. In the case of sample material, frozen PBMC, despite some loss of sensitivity, may be more advantageous for batch analysis. We also recommend that for multi-site studies, common antibody panels, gating strategies and analysis approaches should be employed for better comparability.     

Poly(acrylonitrile)chitosan composite membranes for urease immobilization

(Poly)acrylonitrile/chitosan (PANCHI) composite membranes were prepared. The chitosan layer was deposited on the surface as well as on the pore walls of the base membrane. This resulted in the reduction of the pore size of the membrane and in an increase of their hydrophilicity. The pore structure of PAN and PANCHI membranes were determined by TEM and SEM analyses. It was found that the average size of the pore under a selective layer base PAN membrane is 7 microm, while the membrane coated with 0.25% chitosan shows a reduced pore size--small or equal to 5 microm and with 0.35% chitosan--about 4 microm. The amounts of the functional groups, the degree of hydrophilicity and transport characteristics of PAN/Chitosan composite membranes were determined. Urease was covalently immobilized onto all kinds of PAN/chitosan composite membranes using glutaraldehyde. Both the amount of bound protein and relative activity of immobilized urease were measured. The highest activity (94%) was measured for urease bound to PANCHI2 membranes (0.25% chitosan). The basic characteristics (pH(opt), pH(stability), T(opt), T(stability), heat inactivation and storage stability) of immobilized urease were determined. The obtained results show that the poly(acrylonitrile)chitosan composite membranes are suitable for enzyme immobilization.     

Variation in seed protein and isoenzyme patterns in Cucurbita cultivars

The genetic variability in the seed proteins and the enzyme alcohol dehydrogenase (ADH) in representative species of the genus Cucurbita was studied. The banding patterns were obtained by means of vertical block electrophoresis in polyacrylamide gel. A specific protein components and ADH isoenzymes were established in the polymorphic banding patterns which can be applied individually or in combination as potential biochemical markers for breeding purposes.     

Redox-regulated ion channel activity of a cysteine-containing gramicidin A analogue

According to recent data, gramicidin A analogues having positively charged amino acid sequences at the C-termini exhibit two types of channel activity in lipid membranes: classical cation-selective channels and large unselective pores. The induction of unselective pores was shown here to strongly depend on the redox state of the membrane-bathing solution, if the gramicidin analogue contained a cysteine residue in the sequence GSGPKKKRKVC attached to the C-terminus. In particular, the addition of H2O2 led to an increase in the transmembrane current and the loss of cationic selectivity on planar bilayer lipid membranes and an increase in the carboxyfluorescein leakage of liposomes. The effect was observed at high concentration of the peptide while was absent at the single-channel level. It was concluded that oxidation led to possible formation of dimers of the peptide, which promoted the formation of large unselective pores.     

Aspergillus niger pH 2.1 optimum acid phosphatase with high affinity for phytate

An extracellular acid phosphatase isolated from the culture of a wild strain Aspergillus niger, producing the dephosphorylating 3-phytase, was obtained in a homogeneous form by sequential application of ultrafiltration through PS 50 membrane, gel filtration on Sephadex G-100 and ion exchange chromatography on DEAE-Sepharose CL 6B and CM-Sepharose CL 6B. The enzyme showed a maximum catalytic value in a strongly acidic range (pH 2.0-2.4) with pHopt 2.1 and topt 66 degrees C. The acid phosphatase showed a wide substrate specificity and a high affinity for sodium phytate, 2.5x higher than with 4-nitrophenyl phosphate. This property of the acid phosphatase demonstrated that it is a potent 3-phytase at pH 2.1 and is of great significance for a practical application of the dephosphorylating complex--its addition to the diets of monogastric animals in view of the low pH values in the digestive tract.     

Lipid nanotechnologies for structural studies of membrane‐associated proteins

We present a methodology of lipid nanotubes (LNT) and nanodisks technologies optimized in our laboratory for structural studies of membrane‐associated proteins at close to physiological conditions. The application of these lipid nanotechnologies for structure determination by cryo‐electron microscopy (cryo‐EM) is fundamental for understanding and modulating their function. The LNTs in our studies are single bilayer galactosylceramide based nanotubes of ～20 nm inner diameter and a few microns in length, that self‐assemble in aqueous solutions. The lipid nanodisks (NDs) are self‐assembled discoid lipid bilayers of ～10 nm diameter, which are stabilized in aqueous solutions by a belt of amphipathic helical scaffold proteins. By combining LNT and ND technologies, we can examine structurally how the membrane curvature and lipid composition modulates the function of the membrane‐associated proteins. As proof of principle, we have engineered these lipid nanotechnologies to mimic the activated platelet's phosphtaidylserine rich membrane and have successfully assembled functional membrane‐bound coagulation factor VIII in vitro for structure determination by cryo‐EM. The macromolecular organization of the proteins bound to ND and LNT are further defined by fitting the known atomic structures within the calculated three‐dimensional maps. The combination of LNT and ND technologies offers a means to control the design and assembly of a wide range of functional membrane‐associated proteins and complexes for structural studies by cryo‐EM. The presented results confirm the suitability of the developed methodology for studying the functional structure of membrane‐associated proteins, such as the coagulation factors, at a close to physiological environment. Proteins 2014; 82:2902–2909. © 2014 Wiley Periodicals, Inc.     

First Evaluation after Implementation of a Quality Control System for the Second Line Drug Susceptibility Testing of Mycobacterium tuberculosis Joint Efforts in Low and High Incidence Countries

Three networks/projects involving 27 European countries were established to investigate the quality of second-line drug (SLD) susceptibility testing with conventional and molecular methods. 1. The “Baltic-Nordic TB-Laboratory Network” comprised 11 reference laboratories in the Baltic-Nordic States. They performed SLD testing in the first phase with a panel of 20 Mycobacterium tuberculosis strains. After several laboratories made technical changes a second panel of 10 strains with a higher proportion of resistant strains were tested. Although the concordance for Ofloxacin, Kanamycin, and Capreomycin was consistently high, the largest improvements in performance were achieved for the analysis of Ofloxacin resistant (from 88.9 to 95.0%), and Capreomycin resistant (from 71.0 to 88.9%) strains. 2. Within the FP7 TB PAN-NET project (EU Grant agreement 223681) a quality control panel to standardize the EQA (External Quality Assurance) for first-line drugs (FLD) and SLD testing for phenotypic and molecular methods was established. The strains were characterized by their robustness, unambiguous results when tested, and low proportion of secondary drug resistances. 3. The (European Reference Laboratory Network-TB) ERLN-TB network analyzed four different panels for drug resistance testing using phenotypic and molecular methods; in two rounds in 2010 the 31 participating laboratories began with 5 strains, followed by 10 strains and 6 additional crude DNA extracts in 2011 and 2012 were examined by conventional DST and molecular methods. Overall, we demonstrated the importance of developing inter-laboratory networks to establish quality assurance and improvement of SLD testing of M. tuberculosis.