Characterization of cytosolic phosphoglucoisomerase from immature wheat (Triticum aestivum L.) endosperm

Phosphoglucoisomerase from cytosol of immature wheat endosperm was purified 650-fold by ammonium sulphate fractionation, isopropyl alcohol precipitation, DEAE-cellulose chromatography and gel filtration through Sepharose CL-6B. The enzyme, with a molecular weight of about 130,000, exhibited maximum activity at pH 8.1. It showed typical hyperbolic kinetics with both fructose 6-P and glucose 6-P withK _m of 0.18 mM and 0.44mM respectively. On either side of the optimum pH, the enzyme had lower affinity for the substrates. Using glucose 6-P as the substrate, the equilibrium was reached at 27% fructose 6-P and 73% glucose 6-P with an equilibrium constant of 2.7. The ΔF calculated from the apparent equilibrium constant was +597 cal mol^-1. The activation energy calculated from the Arrhenius plot was 5500 cal mol^-1. The enzyme was completely inhibited by ribose 5-P, ribulose 5-P and 6-phosphogluconate, withK _i values of 0.17, 0.25 and 0.14 mM respectively. The probable role of the enzyme in starch biosynthesis is discussed.     

High level of divergence of male-reproductive-tract proteins, between Drosophila melanogaster and its sibling species, D. simulans

We compared male-reproductive-tract polypeptides of Drosophila melanogaster and D. simulans by using two-dimensional gel electrophoresis. Approximately 64% of male-reproductive-tract polypeptides were identical between two randomly chosen isofemale lines from these two species, compared with 83% identity for third-instar imaginal wing-disc polypeptides. Qualitatively similar differences were found between reproductive tracts and imaginal discs when D. sechellia was compared with D. melanogaster and with D. simulans. When genic polymorphism was taken into account, approximately 10% of male- reproductive-tract polypeptides were apparently fixed for different alleles between D. melanogaster and D. simulans; this proportion is the same as that found for soluble enzymes by one-dimensional gel electrophoresis. Strikingly, approximately 20% of male-reproductive- tract polypeptides of either D. melanogaster or D. simulans had no detectable homologue in the other species. We propose that proteins of the Drosophila male reproductive tract may have diverged more extensively between species than have other types of proteins and that much of this divergence may involve large changes in levels of polypeptide expression.      

Spread of beet necrotic yellow vein virus in infected seedlings and plants of sugar beet (Beta vulgaris)

Summary Infection of sugar beet roots by beet necrotic yellow vein virus (BNYVV) was investigated with transmission electron microscopy, immunogold labelling and enzyme linked immuno sorbent assay (ELISA). Here we show that infection of sugar beet roots is very fast, occurring during germination. Seedlings grown directly in infected soil showed higher BNYVV infection than plants transplanted into infected soil after seven days of initial growth in sterilized soil. The earlier the initial infection, the faster was its spread. The study showed that a few differentiated cells of the cortex and of the xylem parenchyma were the preferred sites of viral multiplication. The spread of viral infection was slow through differentiated tissues. Intact virions were frequently found in undifferentiated and mature vessel elements and xylem parenchyma, whereas they were rare in sieve elements. Virus particle number in the differentiating tracheary elements was high, suggesting that infection of the vessel elements preceded their differentiation. This would explain increased infection after early inoculation. Even the xylem tissue of the primary root was highly infected, the seedlings lacked virus particles in their hypocotyls and leaves.     

Microelectrode studies of the active Na transport pathway of frog skin

When the outer surface of short-circuited frog skin was penetrated with microelectrodes, stable negative potentials that averaged near -100 mV were recorded consistently, confirming the results of Nagel (W. Nagel. 1975. Abstracts of the 5th International Biophysics Congress, Copenhagen. P-147.). The appearance of these stable potentials, V(O), concurrent with the observations that (a) a high resistance outer barrier R(O) accounting for approximately 75 percent or more of the transcellular resistance of control skins had been penetrated and that (b) 10(-5) M amiloride and reduced [Na] outside caused the values of V(O) to increase towards means value near -130 mV while the values of percent R(O) increased to more than 90 percent. It was of relationships were the same as the values of E(1) observed in studies of the current-voltage relationships were the same as the values of E’(1) defined as the values of voltage at the inner barrier when the V(O) of the outer barrier was reduced to zero by voltage clamping of the skins. Accordingly, these data are interpreted to mean that the values of E(1), approximately 130 mV, represent the E(Na) of the sodium pump at the inner barrier. 2,4-DNP was observed to decrease the values of transepithelial voltage less than E(1) the V(O) was negative. These data can be interpreted with a simple electrical equivalent circuit of the active sodium transport pathway of the frog skin that includes the idea that the outer membrane behaves as an electrical rectifier for ion transport.     

Comparative physico-kinetic properties of a homogenous purified β-glucosidase from Withania somnifera leaf

β-glucosidase from Withania somnifera (Solanaceae) leaf has been purified to homogeneity and characterized for its physico-kinetic properties. The enzyme purification was achieved through a sequence of gel filtration and ion-exchange column chromatography, and PAGE revealed the homogeneity purification status of the enzyme. The properties of the enzyme included an acidic pH optima (4.8), alkaline pI (8.7), meso-thermostabity, monomeric structure with subunit molecular weight of about 50 kDa, high affinity for substrate (K _m) for pNPG (0.19 mM) and high (105,263 M^?1 s^?1) catalytic efficiency (K _cat/K _m). The mesostable enzyme had a stringent substrate specificity restricted only to β-linked gluco-conjugate. The enzyme is optimally active at 40 °C with 12.4 kcal Mol^?1 activation energy, and was highly sensitive to d-gluconic acid lactone inhibition (94 % at 1 mM) with an apparent K _i 0.21 mM. The enzyme could catalyze transglucosylation of geraniol with pNPG as glucosyl donor, but not with cellobiose. Some of the physico-kinetic properties were noted to be novel when comprehensively compared with its counterparts from plant, animal and microbial counterparts. Nevertheless, the catalytic and other features of the enzyme were relatively closer to Oryza sativa among plants and Talaromyces thermophillus among fungi. Significance of building-up of a library of novel plant β-glucosidases for structural investigation to understand naturally evolved mechanistics of catalysis has been indicated.     

Alginate–pectin co-encapsulation of dextransucrase and dextranase for oligosaccharide production from sucrose feedstocks

Bioprocess and Biosystems Engineering - The genes for dextransucrase and dextranase were cloned from the genomic regions of Leuconostoc mesenteroides MTCC 10508 and Streptococcus mutans MTCC 497,...     

Benchmarking environmental performance of electric insulator supply chain in India using life cycle assessment

Purpose

This study aims at finding the environmental impacts generated by an electric disk insulator supply chain, used for the distribution of electricity by an open wire system, through a case study. This study also aims at benchmarking the environmental impacts of an electric insulator manufacturing process by taking ideal condition of zero waste as reference.

Methods

Cradle-to-grave life cycle assessment (LCA) has been carried out by following the guidelines provided in ISO 14040 series standards and using Umberto NXT software. ReCiPe endpoint and ReCiPe midpoint impact assessment methodologies have been used to calculate environmental impacts under various categories. The primary data has been collected from a medium-scale manufacturer of electric disk insulators located at Bikaner in north-west India. The secondary data has been taken from ecoinvent 3.0 database and literature. The environmental impacts using endpoint assessment (ecosystem quality, human health, and resources) and midpoint assessment (climate change, fossil depletion, human toxicity, metal depletion, ozone depletion, terrestrial acidification, and water depletion) categories have been computed. Finally, the results are compared and benchmarked against the ideal zero waste condition using three different production scenarios. The limitation of this study is that the data has been collected only from one manufacturer and its supply chain.

Results and discussion

It has been found that the use of steel, electricity, and fuel; transportation of product; and disposal of water generate high environmental impacts in the supply chain. It has also been found that in the electric disk insulator supply chain, the raw material extraction phase has the highest environmental impacts followed by manufacturing, disposal, transportation, and installation phases. This study has also found that benchmark scenario “B” (zero waste condition) is environmentally more efficient in comparison to scenario “A” (actual recycling condition) and scenario “C” (maximum waste condition).

Conclusions

This study has identified that raw materials, resources, and processes in the supply chain of an electric disk insulator manufacturing unit are responsible for the environmental damage. The various manufacturing processes and installation of the electric disk insulators are similar for all manufacturers except the machinery efficiency and the generated waste. This study provides environmental impacts associated with an electric disk insulator manufacturing process under zero waste or ideal conditions (scenario B). These results are used as a benchmark to compare environmental performance of electric disk insulator supply chain operating under actual conditions.