Angiotensin II and its receptors in human endocardial endothelial cells: role in modulating intracellular calcium

The aims of the present study are to investigate the presence and distribution of angiotensin II (Ang II), as well as AT1 and AT2 receptors, in endocardial endothelial cells (EECs) and to determine if the effect of Ang II on intracellular calcium in these cells is mediated via the AT1 or the AT2 receptor. Immunofluorescence and 3D confocal microscopy techniques were used on 20-week-old fetal human EECs. Our results showed that Ang II and its receptors, the AT1 and the AT2 types, are present and exhibit a different distribution in human EECs. Ang II labelling is found throughout the cell with a fluorescence signal higher in the cytosol when compared with the nucleus. Like Ang II, the AT1 receptor fluorescence signal is also homogeneously distributed in human EECs but with a preferential labelling at the level of the nucleus, while the AT2 receptor labelling is solely present in the nucleus. Using fluo-3 and 3D confocal microscopy technique, superfusion of human EECs with increasing concentration of Ang II induced a dose-dependent sustained increase in free cytosolic and nuclear Ca2+ levels. This effect of Ang II on human EEC's intracellular Ca2+ ([Ca2+]) was completely prevented by losartan, an AT1 receptor antagonist. Our results suggest that Ang II, as well as AT1 and AT2 receptors, is present but differentially distributed in EECs of 20-week-old fetal human hearts, and that the AT1 receptor mediates the effects of Ang II on [Ca2+]i in these cells.     

Investigation on plasma immersion ion implantation treated medical implants

In this work the biocompatibility of osteosynsthesis plates treated with plasma immersion ion implantation (PIII) was tested using a rat model. Small rods (? 0.9 mm, and length 10 mm) prepared from different materials-pure Ti, anodised Ti, and two NiTi alloys (SE 508, and SM 495)-were implanted with oxygen by PIII to form a rutile surface layer and subsequently inserted into rat femurs, together with a control group of untreated samples. The results of the biomechanical tests correlate with the histological results, and show that plasma immersion ion implantation leads to an increase of biocompatibility and osseointegration of titanium and NiTi, albeit no improvement of the (bad) biocompatibility of the anodised Ti. Despite the layer thickness of up to 0.5 microm a strong influence of the base material is still present.     

Nucleotide-dependent shape changes in the reverse direction motor, myosin VI

We have studied the shape of myosin VI, the actin minus-end directed motor, by negative stain and metal shadow electron microscopy. Single particle processing was used to make two-dimensional averages of the stain images, which greatly increases the clarity and allows detailed comparisons with crystal structures. A total of 169,964 particle images were obtained from two different constructs in six different states (four nucleotide states and with and without Ca²⁺). The shape of truncated apo myosin VI was very similar to the apo crystal structure, with the lever arm bent strongly backward and around the motor domain. In the full-length molecule, the C-terminal part of the tail has an additional bend taking it back across the motor domain, which may reflect a regulated state. Addition of ATP, ADP, or ATP-γS resulted in a large change, straightening the molecule from the bent shape and swinging the lever by ∼140°. Although these nucleotides would not be expected to produce the pre-powerstroke state, myosin VI in their presence was most similar to the truncated crystal structure with bound ADP-VO₄, which is thought to show the pre-powerstroke shape. The nucleotide data were therefore substantially different from expectation based on crystal structures. The full-length molecule was almost completely monomeric; only ∼1% were dimers, joined through the ends of the tail. Addition of calcium ions appeared to result in release of the second calmodulin light chain. In negatively stained molecules there was little indication of extended α-helical structure in the tail, but molecules viewed by metal shadowing had a tail ∼3× longer, 29 vs. 9 nm, part of which is likely to be a single α-helix.     

Final height in patients with idiopathic short stature and high growth hormone responses to stimulation tests

Children with idiopathic short stature (ISS) may have normal or increased growth hormone (GH) responses to provocation tests and achieve a final height (FH) below -2.0 standard deviation score (SDS) if untreated. FH of subjects with high stimulated GH levels has not been studied in detail. AIM: It was the aim of this study to analyse FH in ISS patients with high GH peak responses to the provocation test. PATIENTS AND METHODS: We studied 16 patients (9 pre-pubertal) with ISS and a GH peak >or=40 mU/l to insulin-induced hypoglycaemia. The patients were recalled at age 19.7 +/- 2.5 years for measurement of FH when blood samples were obtained for serum insulin-like growth factor (IGF)-I, IGF binding protein 3, acid-labile subunit and GH binding protein measurements. GH bioactivity was determined using the Nb2 bioassay. RESULTS: FH was -3.1 +/- 1.0 SDS, being significantly lower than target height (TH). At FH, IGF-I levels were within -1.5 and +1.5 SDS for age and sex in 10 patients and higher than +1.5 SDS in 6 patients. IGF binding protein 3, acid-labile subunit, GH binding protein levels and GH bioactivity values were normal. SUMMARY: These data suggest that patients with ISS and high GH levels during a GH stimulation test may have a more compromised FH. The association of severe ISS with a peak GH >40 mU/l might suggest a degree of insensitivity for the GH-IGF-I axis.     

A modular software concept for individual numerical simulation (FEM) of the human mandible]

A new modular software concept for individual numerical simulation of the human mandible using the finite element method (FEM) is presented. The main task is an individual analysis of regional stress and stress-compatibility on the basis of computed tomographic data in individual patients. Simulation should, however, also be possible in parallel with biomechanical experiments, or for further research projects. For this purpose, rapid and uncomplicated generation of the FEM model, easy modification of input data, and short computation times are required. Practical use in the clinical setting makes appreciable additional demands on the individual software components.     

Bilayered,non-cross-linked collagen matrix for regeneration of facial defects after skin cancer removal: a new perspective for biomaterial-based tissue reconstruction

Classically skin defects are covered by split thickness skin grafts or by means of local or regional skin flaps. In the presented case series for the first time a bilayered, non-crossed-linked collagen matrix has been used in an off-label fashion in order to reconstruct facial skin defects following different types of skin cancer resection. The material is of porcine origin and consists of a spongy and a compact layer. The ratio of the two layers is 1:3 in favour of the spongy layer. The aim of the study was to investigate the potential of this matrix for skin regeneration as an alternative to the standard techniques of skin grafts or flaps. Six patients between 39 and 83 years old were included in the study based on a therapeutic trial. The collagen matrix was used in seven defects involving the nose, eyelid, forehead- and posterior scalp regions, and ranging from 1,2 to 6 cm in diameter. Two different head and neck surgeons at two different institutions performed the operations. Each used a different technique in covering the wound following surgery, i.e. with and without a latex-based sheet under the pressure dressing. In three cases cylindrical biopsies were taken after 14 days. In all cases the biomaterial application was performed without any complication and no adverse effects were observed. Clinically, the collagen matrix contributed to a tension-free skin regeneration, independent of the wound dressing used. The newly regenerated skin showed strong similarity to the adjacent normal tissue both in quality and colour. Histological analysis indicated that the spongy layer replaced the defective connective tissue, by providing stepwise integration into the surrounding implantation bed, while the compact layer was infiltrated by mononuclear cells and contributed to its epithelialization by means of a ?conductive“process from the surrounding epithelial cells. The clinical and histological data demonstrate that the collagen bilayered matrix used in this series contributes to a ?Guided-Integrative-Regeneration-Process“, which still needs to be further understood. The biomimetic nature of this material seems to contribute to physiological matrix remodelling, which probably involves other matricellular proteins essential for soft tissue regeneration. A deeper understanding of the mechanism, involved in the tissue integration of this material and its contribution to soft tissue regeneration based on the direct and indirect effect of matricellular proteins could open new therapeutic avenues for biomaterial-based soft tissue regeneration as an alternative to traditional flap-based plastic surgery.     

Structured water layers adjacent to biological membranes

Water amid the restricted space of crowded biological macromolecules and at membrane interfaces is essential for cell function, though the structure and function of this "biological water" itself remains poorly defined. The force required to remove strongly bound water is referred to as the hydration force and due to its widespread importance, it has been studied in numerous systems. Here, by using a highly sensitive dynamic atomic force microscope technique in conjunction with a carbon nanotube probe, we reveal a hydration force with an oscillatory profile that reflects the removal of up to five structured water layers from between the probe and biological membrane surface. Further, we find that the hydration force can be modified by changing the membrane fluidity. For 1,2-dipalmitoyl-sn-glycero-3-phosphocholine gel (Lbeta) phase bilayers, each oscillation in the force profile indicates the force required to displace a single layer of water molecules from between the probe and bilayer. In contrast, 1,2-dipalmitoyl-sn-glycero-3-phosphocholine fluid (Lalpha) phase bilayers at 60 degrees C and 1,2-dioleoyl-sn-glycero-3-phosphocholine fluid (Lalpha) phase bilayers at 24 degrees C seriously disrupt the molecular ordering of the water and result predominantly in a monotonic force profile.     

Frequency modulation atomic force microscopy reveals individual intermediates associated with each unfolded I27 titin domain

In this study, we apply a dynamic atomic force microscopy (AFM) technique, frequency modulation (FM) detection, to the mechanical unfolding of single titin I27 domains and make comparisons with measurements made using the AFM contact or static mode method. Static mode measurements revealed the well-known force transition occurring at 100-120 pN in the first unfolding peak, which was less clear, or more often absent, in the subsequent unfolding peaks. In contrast, some FM-AFM curves clearly resolved a force transition associated with each of the unfolding peaks irrespective of the number of observed unfolded domains. As expected for FM-AFM, the frequency shift response of the main unfolding peaks and their intermediates could only be detected when the oscillation amplitudes used were smaller than the interaction lengths being measured. It was also shown that the forces measured for the dynamical interaction of the FM-AFM technique were significantly lower than those measured using the static mode. This study highlights the potential for using dynamic AFM for investigating biological interactions, including protein unfolding and the detection of novel unfolding intermediates.     

Roles of nuclear NPY and NPY receptors in the regulation of the endocardial endothelium and heart function

It is now well accepted that the heart is a multifunctional organ in which endothelial cells, and more particularly endocardial endothelial cells (EECs), seem to play an important role in regulating and maintaining cardiac excitation-contraction coupling. Even if major differences exist between vascular endothelial cells (VECs) and EECs, all endothelial cells including EECs release a variety of auto- and paracrine factors such as nitric oxide, endothelin-1, angiotensin II, and neuropeptide Y. All these factors were reported to affect cardiomyocyte contractile performance and rhythmicity. In this review, findings on the morphology of EECs, differences between EECs and other types of endothelial cells, interactions between EECs and the adjacent cardiomyocytes, and effects of NPY on the heart will be presented. We will also show evidence on the presence and localization of NPY and the Y1 receptor in the endocardial endothelium and discuss their role in the regulation of cytosolic and nuclear free calcium.     

Forest change estimates for the northern Petén region of Guatemala — 1986–1990

Landsat-thematic mapper images recorded April 1986 and 1990 were obtained for northern Guatemala. The study area corresponds to a major portion of Guatemala's Maya Biosphere reserve but also includes land outside the western and southern boundary of the reserve. The normalized difference vegetation index (NDVI) was computed at each date and image differencing (subtraction) was performed. The resulting image was thresholded into three categories: regrowth, no change, and forest clearing. A 10×10 km grid system was superimposed on the image to categorize the percentage of each 100 km² cell that changed between 1986 and 1990. Forest clearing patterns were apparent along the border areas (Mexico and Guatemala) and all along the southern portion of the study area where human populations were moving toward the Maya Biosphere borders, along existing roads. Forest clearing was negligible or absent in the roadless areas.