Cloning,purification and characterization of a cellulase-free xylanase from <Emphasis Type="Italic">Geobacillus thermodenitrificans</Emphasis> AK53

Geobacillus thermodenitrificans AK53 xyl gene encoding xylanase was isolated, cloned and expressed in Escherichia coli. After purifying recombinant xylanase from G. thermodenitrificans AK53 (GthAK53Xyl) to homogeneity by ammonium sulfate precipitation and ion exchange chromatography, biochemical properties of the enzyme were determined. The kinetic studies for GthAK53Xyl showed K_M value to be 4.34 mg/mL (for D-xylose) and V_max value to be 2028.9 μmoles mg^–1 min^–1. The optimal temperature and pH for enzyme activity were found out to be 70°C and 5.0, respectively. The expressed protein showed the highest sequence similarity with the xylanases of G. thermodenitrificans JK1 (JN209933) and G. thermodenitrificans T-2 (EU599644). Metal cations Mg²⁺ and Mn²⁺ were found to be required for the enzyme activity, however, Co²⁺, Hg²⁺, Fe²⁺ and Cu²⁺ ions caused inhibitor effect on it. GthAK53Xyl had no cellulolytic activity and degraded xylan in an endo-fashion. The action of the enzyme on xylan from oat spelt produced xylobiose and xylopentose. The reported results are suggestive of a xylanase exhibiting desirable kinetics, stability parameters and metal resistance required for the efficient production of xylobiose at industrial scale.     

Evaluation of arabinofuranosidase and xylanase activities of Geobacillus spp. isolated from some hot springs in Turkey

Some hot springs located in the west of Turkey were investigated with respect to the presence of thermophilic microorganisms. Based on phenotyping characteristics and 16S rRNA gene sequence analysis, 16 of the isolates belonged to the genus Geobacillus and grew optimally at about 60 degrees C on nutrient agar. 16S rRNA gene sequence analysis showed that these isolates resembled Geobacillus species by > or = 97%, but SDS-PAGE profiles of these 16 isolates differ from some of the other species of the genus Geobacillus. However, it is also known that analysis of 16S rRNA gene sequences may be insufficient to distinguish between some species. It is proposed that recN sequence comparisons could accurately measure genome similarities for the Geobacillus genus. Based on recN sequence analysis, isolates 11, IT3, and 12 are strains of G stearothermophilus; isolate 14.3 is a strain of G thermodenitrificans; isolates 9.1, IT4.1, and 4.5 are uncertain and it is required to make further analysis. The presence of xylanase and arabinofuranosidase activities, and their optimum temperature and pH were also investigated. These results showed that 7 of the strains have both xylanase and arabinofuranosidase activities, 4 of them has only xylanase, and the remaning 5 strains have neither of these activities. The isolates 9.1, 7.1, and 3.3 have the highest temperature optima (80 degrees C), and 7.2, 9.1, AO4, 9.2, and AO17 have the highest pH optima (pH 8) of xylanase. Isolates 7.2, AO4, AC15, and 12 have optimum arabinofuranosidase activities at 75 degrees C, and only isolate AC 15 has the lowest pH of 5.5.     

Targeting CoV-2 spike RBD and ACE-2 interaction with flavonoids of Anatolian propolis by in silico and in vitro studies in terms of possible COVID-19 therapeutics

Propolis is a multi-functional bee product rich in polyphenols. In this study, the inhibitory effect of Anatolian propolis against SARS-coronavirus-2 (SARS-CoV-2) was investigated in vitro and in silico. Raw and commercial propolis samples were used, and both samples were found to be rich in caffeic acid, p-coumaric acid, ferulic acid, t-cinnamic acid, hesperetin, chrysin, pinocembrin, and caffeic acid phenethyl ester (CAPE) at HPLC-UV analysis. Ethanolic propolis extracts (EPE) were used in the ELISA screening test against the spike S1 protein (SARS-CoV-2): ACE-2 interaction for in vitro study. The binding energy values of these polyphenols to the SARS-CoV-2 spike and ACE-2 protein were calculated separately with a molecular docking study using the AutoDock 4.2.6 program. In addition, the pharmacokinetics and drug-likeness properties of these eight polyphenols were calculated according to the SwissADME tool. The binding energy value of pinocembrin was highest in both receptors, followed by chrysin, CAPE, and hesperetin. Based on the in silico modeling and ADME (absorption, distribution, metabolism, and excretion) behaviors of the eight polyphenols, the compounds exhibited the potential ability to act effectively as novel drugs. The findings of both studies showed that propolis has a high inhibitory potential against the Covid-19 virus. However, further studies are now needed.     

Determination and characterization of thermostable esterolytic activity from a novel thermophilic bacterium Anoxybacillus gonensis A4

A novel hot spring thermophile, Anoxybacillus gonensis A4 (A. gonensis A4) was investigated in terms of capability of tributyrin degradation and characterization of its thermostable esterase activity by the hydrolysis of p-nitrophenyl butyrate (PNPB). It was observed that A. gonensis A4 has an esterase with a molecular weight of 62 kDa. The extracellular crude preparation was characterized in terms of substrate specificity, pH and temperature optima and stability, kinetic parameters and inhibition/activation behaviour towards some chemicals and metal ions. Tributyrin agar assay showed that A. gonensis A4 secreted an esterase and V(max) and K(m) values of its activity were found to be 800 U/L and 176.5 microM, respectively in the presence of PNPB substrate. The optimum temperature and pH, for A. gonensis A4 esterase was 60-80 degrees C and 5.5, respectively. Although the enzyme activity was not significantly changed by incubating crude extract solution at 30-70 degrees C for 1 h, the enzyme activity was fully lost at 80 degrees C for same incubation period. The pH-stability profile showed that original crude esterase activity increased nearly 2-fold at pH 6.0. The effect of some chemicals on crude esterase activity indicated that A. gonensis A4 produce an esterase having serine residue in active site and -SH groups were essential for its activity.     

Purification and characterization of a highly thermostable α-<Emphasis Type="SmallCaps">l</Emphasis>-Arabinofuranosidase from <Emphasis Type="Italic">Geobacillus caldoxylolyticus</Emphasis> TK4

The gene encoding an α-l-arabinofuranosidase from Geobacillus caldoxylolyticus TK4, AbfATK4, was isolated, cloned, and sequenced. The deduced protein had a molecular mass of about 58 kDa, and analysis of its amino acid sequence revealed significant homology and conservation of different catalytic residues with α-l-arabinofuranosidases belonging to family 51 of the glycoside hydrolases. A histidine tag was introduced at the N-terminal end of AbfATK4, and the recombinant protein was expressed in Escherichia coli BL21, under control of isopropyl-β-D-thiogalactopyranoside-inducible T7 promoter. The enzyme was purified by nickel affinity chromatography. The molecular mass of the native protein, as determined by gel filtration, was about 236 kDa, suggesting a homotetrameric structure. AbfATK4 was active at a broad pH range (pH 5.0–10.0) and at a broad temperature range (40–85°C), and it had an optimum pH of 6.0 and an optimum temperature of 75–80°C. The enzyme was more thermostable than previously described arabinofuranosidases and did not lose any activity after 48 h incubation at 70°C. The protein exhibited a high level of activity with p-nitrophenyl-α-l-arabinofuranoside, with apparent K _m and V _max values of 0.17 mM and 588.2 U/mg, respectively. AbfATK4 also exhibited a low level of activity with p-nitrophenyl-β-d-xylopyranoside, with apparent K _m and V _max values of 1.57 mM and 151.5 U/mg, respectively. AbfATK4 released l-arabinose only from arabinan and arabinooligosaccharides. No endoarabinanase activity was detected. These findings suggest that AbfATK4 is an exo-acting enzyme.     

Characterization of a xylanase from a thermophilic strain of <Emphasis Type="Italic">Anoxybacillus pushchinoensis</Emphasis> A8

A facultatively anaerobic, thermophilic, xylanolytic bacterium was isolated from a sample collected from the Diyadin Hot Springs, Turkey. According to morphological, biochemical and molecular identification, this new strain was suggested to be representative of the Anoxybacillus pushchinoensis and it was designated as Anoxybacillus pushchinoensis strain A8. It exhibited 97% similarity to 16S rRNA gene sequence of A. pushchinoensis and 77% DNA homology by DNA-DNA hybridization studies. Q-sepharose and CM-sepharose chromatography was used to purify an extracellular xylanase to >90% purity from this species. The enzyme had a molecular mass of approximately 83 kDa. The enzyme showed optimum activity at pH 6.5 and it was 96% stable over a broad pH range of 6.5–11 for 24 hours. The enzyme had optimum activity at 55°C and it was 100% stable at temperature between 50–60°C up to 24 hours. Kinetic characterization of the enzyme was performed at temperature optima (55°C) and V_max and K _m were found to be 59.88 U/mg protein and 0.909 mg/mL, respectively. Oat spelt xylan but not xylooligosaccharides was degraded by the enzyme and xylose was the only product detected from oat xylan degradation. This suggested that the enzyme was an exo-acting xylanase.     

Biodiesel production from various feedstocks and their effects on the fuel properties

Biodiesel, which is a new, renewable and biological origin alternative diesel fuel, has been receiving more attention all over the world due to the energy needs and environmental consciousness. Biodiesel is usually produced from food-grade vegetable oils using transesterification process. Using food-grade vegetable oils is not economically feasible since they are more expensive than diesel fuel. Therefore, it is said that the main obstacle for commercialization of biodiesel is its high cost. Waste cooking oils, restaurant greases, soapstocks and animal fats are potential feedstocks for biodiesel production to lower the cost of biodiesel. However, to produce fuel-grade biodiesel, the characteristics of feedstock are very important during the initial research and production stage since the fuel properties mainly depend on the feedstock properties. This review paper presents both biodiesel productions from various feedstocks and their effects on the fuel properties. JIMB 2008: BioEnergy - Special issue.     

Use of <Emphasis Type="Italic">rpoB</Emphasis> sequences and rep-PCR for phylogenetic study of <Emphasis Type="Italic">Anoxybacillus</Emphasis> species

This study was conducted to investigate the applicability of rpoB, which encodes the β subunit of RNA polymerase, to be used as an alternative to 16S rRNA gene sequence similarity analysis in the thermophilic genus Anoxybacillus. Partial rpoB sequences were generated for the 14 type strains of Anoxybacillus species and 6 other strains of four Anoxybacillus species. The sequences and the phylogenetic tree of rpoB were compared with those obtained from 16S rRNA gene analysis. The rpoB gene was found to provide a better resolution for Anoxybacillus species, with lower interspecies sequence similarities. The rpoB sequence similarity analysis permitted a more accurate discrimination of the species within the Anoxybacillus genus than the more commonly used 16S rRNA gene. Furthermore, rapid and reproducible repetitive extragenic palindromic fingerprinting techniques (REP-, ERIC-, and BOX-PCR) were employed for the specimens of genus Anoxybacillus. Through comparison of the three methods, it was found that the BOX-PCR method generated more informative results than REP-PCR for the studied strains; BOX-PCR profiles were more distinct for the different strains, including a higher number of bands. Rapid and reproducible repetitive extragenic palindromic fingerprinting techniques (rep-PCR) constitute a suitable molecular approach for the validation and maintenance of taxonomy within the Anoxybacillus genus. The results of this study show that rpoB and rep-PCR provide rapid and reliable methods for molecular typing of Anoxybacillus species.     

Cloning, purification and characterization of a thermostable carboxylesterase from Anoxybacillus sp. PDF1

The gene encoding a carboxylesterase from Anoxybacillus sp., PDF1, was cloned and sequenced. The recombinant protein was expressed in Escherichia coli BL21, under the control of isopropyl-β-D-thiogalactopyranoside-inducible T7 promoter. The enzyme, designated as PDF1Est, was purified by heat shock and ion-exchange column chromatography. The molecular mass of the native protein, as determined by SDS-PAGE, was about 26 kDa. PDF1Est was active under a broad pH range (pH 5.0-10.0) and a broad temperature range (25-90 °C), and it had an optimum pH of 8.0 and an optimum temperature of 60 °C. The enzyme was thermostable carboxylesterase, and did not lose any activity after 30 min of incubation at 60 °C. The enzyme exhibited a high level of activity with p-nitrophenyl butyrate with apparent K(m), V(max), and K(cat) values of 0.348 ± 0.030 mM, 3725.8 U/mg, and 1500 ± 54.50/s, respectively. The effect of some chemicals on the esterase activity indicated that Anoxybacillus sp. PDF1 produce an carboxylesterase having serine residue in active site and -SH groups in specific sites, which are required for its activity.