The gene for trypsin inhibitor CMe is regulated in trans by the lys 3a locus in the endosperm of barley (Hordeum vulgare L.)

Summary A cDNA encoding trypsin inhibitor CMe from barley endosperm has been cloned and characterized. The longest open reading frame of the cloned cDNA codes for a typical signal peptide of 24 residues followed by a sequence which is identical to the known amino acid sequence of the inhibitor, except for an Ile/Leu substitution at position 59. Southern blot analysis of wheat-barley addition lines has shown that chromosome 3H of barley carries the gene for CMe. This protein is present at less than 2%–3% of the wild-type amount in the mature endosperm of the mutant Risø 1508 with respect to Bomi barley, from which it has been derived, and the corresponding steady state levels of the CMe mRNA are about I%. One or two copies of the CMe gene (synonym Itc1) per haploid genome have been estimated both in the wild type and in the mutant, and DNA restriction patterns are identical in both stocks, so neither a change in copy number nor a major rearrangement of the structural gene account for the markedly decreased expression. The mutation at the lys 3a locus in Risø 1508 has been previously mapped in chromosome 7 (synonym 5H). A single dose of the wild-type allele at this locus (Lys 3a) restores the expression of gene CMe (allele CMe-1) in chromosome 3H to normal levels.     

Isolation and promoter characterization of barley geneItr1 encoding trypsin inhibitor BTI-CMe: differential activity in wild-type and mutantlys3a endosperm

The geneItr1, encoding trypsin inhibitor BTI-CMe, has been obtained from a genomic library ofHordeum vulgare L. The gene has no introns and presents in its 5-upstream region 605 bp that are homologous to the long terminal repeats (LTR) of the copia-like retro-transposon Bare-1. Functional analysis of theItr1 promoter by transient expression in protoplasts derived from different barley tissues, has shown that in this system theItr1 promoter retains its endosperm specifity and thetrans-regulation mediated by theLys3a gene. The proximal promoter extending 343 bp upstream of the translation initiation ATG codon is sufficient to confer fullGUS expression and for endosperm specifity. In protoplasts derived from thelys3a mutant, Risø 1508,GUS activity was less than 5% of that obtained with the same constructs in the protoplasts of wild-type Bomi from which it derives. Gel retardation experiments, after incubation with proteins obtained from both types of endosperm nuclei, also show differential patterns. Possible reasons for these differences are discussed.Equal authours     

Analysis of parameters about useful life extension in 70 tools and methods related to eco-design and circular economy

One of the approaches followed by the circular economy (CE) to achieve sustainability through design is product life extension. Extending the life of products to make them useful for as long as possible is a means to reduce waste production and materials consumption, as well as the related impacts. For designers, conceptualizing products in a way that allows them to be used for longer is a challenge, and assessing how well they extend their lifespan can be helpful when it comes to choosing the best proposal. In this paper, 70 tools and methods related to eco-design and circular economy are studied to determine how many of them consider parameters related to life extension and which can be applied in the early stages of design. The results of the analysis show that most of the existing tools and methods are applicable to developed products, and only a few of them take into account parameters related to extending the useful life. Of the 70 tools and methods, only 14 include some parameter related to life extension and are applicable to concepts. CE toolkit, Eco-design PILOT, CE Designer, Circularity Assessment tool, Circularity Potential Indicator and Circular Design Tools take into consideration eight or more parameters to assess life extension in concepts. This will help designers select the most appropriate and will indicate the need for more complete tools to consider useful life extension in the early stages of design and thus enhance the selection of more sustainable products.     

Temperature coefficients of peptides dissolved in hexafluoroisopropanol monitor distortions of helices

Temperature coefficients are widely used as an indication of solvent accessibility to amide protons. Low temperature coefficients are related to low accessibility and are often interpreted as evidence for intramolecular hydrogen bonding. Conformational shifts, i.e. the difference between chemical shifts of a particular residue in a structured and in a random-coil conformation, provide information on secondary structure. In particular, negative CH conformational shifts are often used to delineate the extent of helical stretches. NH conformational shifts show large oscillations within a helix that have been interpreted as the result of helix distortions affecting hydrogen bond lengths. In the course of the study of different peptides that adopt a helical structure in the presence of the structure-inducing solvent hexafluoroisopropanol (HFIP), we have found a strong correlation between temperature coefficients and amide conformational shifts. However, contrary to the initial expectations, lower temperature coefficients were associated to amide protons involved in longer, and presumably weaker, hydrogen bonds. The correlation can be explained, however, assuming that, in helical peptides dissolved in HFIP, temperature affects the chemical shift of amide protons mainly by changing the average length of intramolecular hydrogen bonds and changes in solvent accessibility play only a secondary role under these experimental conditions. The pattern of temperature coefficients in helical peptides can therefore be used to identify short or long hydrogen bonds causing bending of the helix axis.     

Use of a Base-Labile Protected Derivative of 6-Mercaptohexanol for the Preparation of Oligonucleotides Containing a Thiol Group at the 5′-End

Abstract

The preparation of a base-labile (Dnpe) protected derivative of 6-mercaptohexanol is described. The use of the phosphoramidite derivative of this compound improves both yields and the time needed for the preparation of oligonucleotides containing a thiol group at the 5′-end.     

Pyrosequencing protocol using a universal biotinylated primer for mutation detection and SNP genotyping

DNA sequencing has markedly changed the nature of biomedical research, identifying millions of polymorphisms along the human genome that now require further analysis to study the genetic basis of human diseases. Among the DNA-sequencing platforms available, Pyrosequencing has become a useful tool for medium-throughput single nucleotide polymorphism (SNP) genotyping, mutation detection, copy-number studies and DNA methylation analysis. Its 96-well genotyping format allows reliable results to be obtained at reasonable costs in a few minutes. However, a specific biotinylated primer is usually required for each SNP under study to allow the capture of single-stranded DNA template for the Pyrosequencing assay. Here, we present an alternative to the standard labeling of PCR products for analysis by Pyrosequencing that circumvents the requirement of specific biotinylated primers for each SNP of interest. This protocol uses a single biotinylated primer that is simultaneously incorporated into all M13-tagged PCR products during the amplification reaction. The protocol covers all steps from the PCR amplification and capture of single-stranded template, its preparation, and the Pyrosequencing assay itself. Once the correct primer stoichiometry has been determined, the assay takes around 2 h for PCR amplification, followed by 15-20 min (per plate) to obtain the genotypes.     

In vivo gene regulation in Salmonella spp. by a salicylate-dependent control circuit

Systems allowing tightly regulated expression of prokaryotic genes in vivo are important for performing functional studies of bacterial genes in host-pathogen interactions and establishing bacteria-based therapies. We integrated a regulatory control circuit activated by acetyl salicylic acid (ASA) in attenuated Salmonella enterica that carries an expression module with a gene of interest under control of the XylS2-dependent Pm promoter. This resulted in 20-150-fold induction ex vivo. The regulatory circuit was also efficiently induced by ASA when the bacteria resided in eukaryotic cells, both in vitro and in vivo. To validate the circuit, we administered Salmonella spp., carrying an expression module encoding the 5-fluorocytosine-converting enzyme cytosine deaminase in the bacterial chromosome or in a plasmid, to mice with tumors. Induction with ASA before 5-fluorocytosine administration resulted in a significant reduction of tumor growth. These results demonstrate the usefulness of the regulatory control circuit to selectively switch on gene expression during bacterial infection.     

Identification of 13 novel human modification guide RNAs

Members of the two expanding RNA subclasses termed C/D and H/ACA RNAs guide the 2'-O-methylations and pseudouridylations, respectively, of rRNA and spliceosomal RNAs (snRNAs). Here, we report on the identification of 13 novel human intron-encoded small RNAs (U94-U106) belonging to the two subclasses of modification guides. Seven of them are predicted to direct 2'-O-methylations in rRNA or snRNAs, while the remainder represent novel orphan RNA modification guides. From these, U100, which is exclusively detected in Cajal bodies (CBs), is predicted to direct modification of a U6 snRNA uridine, U(9), which to date has not been found to be pseudouridylated. Hence, within CBs, U100 might function in the folding pathway or other aspects of U6 snRNA metabolism rather than acting as a pseudouridylation guide. U106 C/D snoRNA might also possess an RNA chaperone activity only since its two conserved antisense elements match two rRNA sequences devoid of methylated nucleotides and located remarkably close to each other within the 18S rRNA secondary structure. Finally, we have identified a retrogene for U99 snoRNA located within an intron of the Siat5 gene, supporting the notion that retro-transposition events might have played a substantial role in the mobility and diversification of snoRNA genes during evolution.