CTLA4 Autoimmunity-Associated Genotype Contributes to Severe Pulmonary Tuberculosis in an African Population

The gene of Cytotoxic T Lymphocyte-associated Antigen 4 (CTLA4), a negative regulator of T lymphocytes, contains a single-nucleotide polymorphism (SNP) at position +6230A->G (ct60A->G), which has been found associated with several autoimmune diseases and appears to reduce T-cell inhibitory activity. In Ghana, West Africa, we compared the frequencies of CTLA4 +6230 A/G and 6 haplotype-tagging SNPs in 2010 smear-positive, HIV-negative patients with pulmonary tuberculosis (TB) and 2346 controls matched for age, gender and ethnicity. We found no difference in allele frequencies between cases and controls. However, +6230A and a distinct CTLA4 haplotype and a diplotype comprising the +6230A allele were significantly less frequent among cases with large opacities in chest radiographs compared to those with small ones (P_{corrected [cor]} = 0.002, P_cor = 0.00045, P = 0.0005, respectively). This finding suggests that an increased T-cell activity associated with the CTLA4 +6230G allele contributes to pathology rather than to protection in pulmonary TB.     

Amphiphilic cationic peptides mediate cell adhesion to plastic surfaces

Four amphiphilic peptides, each with net charges of +2 or more at neutrality and molecular weights under 4 kilodaltons, were found to mediate the adhesion of normal rat kidney fibroblasts to polystyrene surfaces. Two of these peptides, a model for calcitonin (peptide 1, MCT) and melittin (peptide 2, MEL), form amphiphilic alpha-helical structures at aqueous/nonpolar interfaces. The other two, a luteinizing hormone-releasing hormone model (peptide 3, LHM) and a platelet factor model (peptide 4, MPF) form beta-strand structures in amphiphilic environments. Although it contains only 10 residues, LHM mediated adhesion to surfaces coated with solutions containing as little as 10 pmoles/ml of peptide. All four of these peptides were capable of forming monolayers at air-buffer interfaces with collapse pressures greater than 20 dynes/cm. None of these four peptides contains the tetrapeptide sequence Arg-Gly-Asp-Ser, which has been associated with fibronectin-mediated cell adhesion. Ten polypeptides that also lacked the sequence Arg-Gly-Asp-Ser but were nonamphiphilic and/or had net charges less than +2 at neutrality were all incapable of mediating cell adhesion (Pierschbacher and Ruoslahti, 1984). The morphologies of NRK cells spread on polystyrene coated with peptide LHM resemble the morphologies on fibronectin-coated surfaces, whereas cells spread on surfaces coated with MCT or MEL exhibit strikingly different morphologies. The adhesiveness of MCT, MEL, LHM, and MPF implies that many amphiphilic cationic peptides could prove useful as well defined adhesive substrata for cell culture and for studies of the mechanism of cell adhesion.     

A para-nitrophenol phosphonate probe labels distinct serine hydrolases of Arabidopsis

Activity-based protein profiling represents a powerful methodology to probe the activity state of enzymes under various physiological conditions. Here we present the development of a para-nitrophenol phosphonate activity-based probe with structural similarities to the potent agrochemical paraoxon. We demonstrate that this probes labels distinct serine hydrolases with the carboxylesterase CXE12 as the predominant target in Arabidopsis thaliana. The designed probe features a distinct labeling pattern and therefore represents a promising chemical tool to investigate physiological roles of selected serine hydrolases such as CXE12 in plant biology.     

Highly specialized Cretaceous beetle parasitoids (Ripiphoridae) identified with optimized visualization of microstructures

Extremely miniaturized longipedes insects (body length c. 0.3 mm) embedded in two pieces of Cretaceous amber from Myanmar are described and interpreted. Using inverted fluorescence and light microscopy for detailed analysis of microstructures, the inclusions were identified as primary larvae of the beetle family Ripiphoridae, subfamily Ripidiinae. While the structure of thoracic and abdominal segments including appendages corresponds well with the groundplan known in recent members of Ripidiinae, a curved prosternal ridge with prominent spines (each c. 5 μm), the reduced condition of stemmata and antennae and the lack of sharp mandibles are unique features within the entire family, apparently apomorphies of the longipedes larvae. A sinuate prosternal edge with a dense row of spines (prosternoctenidium) might be homologous with ‘head ctenidia’ in some previously described miniaturized conicocephalate larvae, but further investigation is needed. The morphological differences between the head of longipedes larvae and extant Ripidiinae are interpreted as adaptations to different groups of hosts and life strategies. Palaeoethology of the longipedes larvae is briefly discussed. In addition, the systematic placement of conicocephalate larvae from Canadian, Myanmar and Russian Cretaceous ambers, already interpreted by various authors as primary instars within Coleopterida (assigned to either Strepsiptera or to the coleopteran Tenebrionoidea: Ripiphoridae), is discussed.     

Synthesis of novel acetylene-containing amino acids

Summary.  Novel synthetic procedures for the modification of non-proteinogenic acetylene-containing amino acids have been developed. The functionalization either proceeds via zinc/copper-mediated introduction of alkyl substituents, or via tungsten-catalyzed ring-closing alkyne metathesis reactions. Received March 28, 2002 Accepted October 3, 2002 Published online December 18, 2002 Acknowledgements These investigations are supported (in part) by the Netherlands Research Council for Chemical Sciences (CW) with financial aid from the Netherlands Technology Foundation (STW). Authors' address: Floris P. J. T. Rutjes, Prof. Dr., Department of Organic Chemistry, University of Nijmegen, Toernooiveld 1, NL-6525 ED Nijmegen, The Netherlands, E-mail: rutjes@sci.kun.nl  2, selected data: ¹H NMR (300 MHz, CDCl₃) δ 5.32 (d, J = 7.7 Hz, 1H), 4.44–4.40 (m, 1H), 3.76 (s, 3H), 2.75–2.73 (d, J = 5.0 Hz, 2H), 1.44 (s, 9H); ¹³C NMR (75 MHz, CDCl₃) δ 171.0, 155.0, 80.3, 74.6, 52.6, 51.9, 41.7, 28.3, 24.0; mp = 55°C.  Typical procedure for 5: zinc dust (116 mg, 1.408 mmol) was weighed into a 20 mL flask, which was repeatedly evacuated (with heating using a heat gun) and flushed with argon. Dry DMF (0.5 mL, distilled from CaH₂) and 1,2-dibromoethane (9.2 μL, 0.106 mmol) were added and the flask was heated at 80°C for 40 min. The reaction mixture was allowed to cool to room temperature, trimethylsilyl chloride (4 μL, 0.035 mmol) was added and the resulting mixture was stirred vigorously for a further 30 min under argon. Iodocyclohexane (69 μl, 0.528 mmol) was added and stirred at room temperature for 3 h more after which stirring was ceased to settle the zinc. CuCN (41 mg, 0.458 mmol) and LiCl (40 mg, 0.915 mmol) were heated to 150°C for 2 h and cooled to room temperature. Addition of DMF (1 mL) formed a soluble CuCN·2LiCl complex within 5 min. After cooling the Cu-complex to −15°C, the organozinc reagent was added dropwise followed by the bromoacetylene 2 (116 mg, 0.352 mmol). The mixture was allowed to stir overnight at room temperature. Water was added and the suspension was extracted using heptane, washed with brine, dried (MgSO₄) and concentrated. Purification using flash column chromatography (10% EtOAc in heptane) yielded 5 (100 mg, 81%) as a colorless oil. 5: IR ν 3355, 2929, 2852, 2359, 2337, 1749, 1717, 1498, 1447, 1365, 1251, 1181, 1060; ¹H NMR (300 MHz, CDCl₃) δ 5.28 (d, J = 7.7 Hz, 1H), 4.43–4.38 (m, 1H), 3.73 (s, 3H), 2.69–2.63 (m, 2H), 2.13 (m, 1H), 1.73–1.22 (m, 10H), 1.43 (s, 9H); ¹³C NMR (75 MHz, CDCl₃) δ 171.4, 155.0, 88.1, 79.9, 73.8, 52.3, 32.7, 32.7, 28.8, 28.2, 25.8, 24.6, 23.1; HRMS (EI): calculated for C₁₇H₂₇NO₄ 309.1940, found 309.1937.  A solution of the tungsten catalyst (7 mg, 10 mol%) in C₆H₅Cl (2 mL) was treated with a solution of 14 (49.0 mg, 0.120 mmol) in C₆H₅Cl (5.0 mL) under an argon atmosphere and the resulting mixture was heated at 80°C for 3 h. Evaporation followed by flash column chromatography (80% EtOAc in heptane) afforded 15 (21.0 mg, 50%; 64% after correction for starting material) and 14 (16 mg, 33%) as colorless oils. 15: [α]_D =–14.6 (c = 1, CH₂Cl₂); IR ν 3313, 2931, 2865, 2249, 1744, 1667, 1520, 1366, 1170; ¹H NMR (400 MHz, CDCl₃) δ 7.14 (d, J = 8.7 Hz, 1H), 6.08 (d, J = 8.3 Hz, 1H), 4.78 (q, J = 6.8 Hz, 1H), 4.27 (q, J = 7.9 Hz, 1H), 3.73 (s, 3H), 2.17–2.15 (m, 4H), 2.07–1.96 (m, 2H), 1.79–1.52 (m, 4H), 1.45 (s, 9H), 0.89–0.83 (m, 2H); ¹³C NMR (100 MHz, CDCl₃) δ 173.2, 171.8, 155.8, 80.4, 80.2, 79.3, 53.8, 52.5, 51.2, 32.8 (2×), 28.1, 24.6, 24.2, 18.3 (2×); HRMS (EI): calculated for C₁₈H₂₈N₂O₅     

Introduction of the mercury transposon Tn501 into Rhizobium japonicum strains 31 and 110

Abstract Transposon Tn 501 , which encodes resistance to mercuric ions, was introduced into Rhizobium japonicum 110 and 31 by conjugal transfer. The transposon donor plasmid (pMD100) was able to mobilize into R. japonicum , but could not be maintained. Hg²⁺-resistant colonies were recovered at a frequency of 1.9 × 10⁻⁸/recipient for strain 110, and 1.7 × 10⁻⁷/recipient for strain 31. Presence of Tn 501 in Hg-resistant isolates was verified by Southern analysis and demonstrating transposition of Hg resistance. Transposon mutagenesis has been used to generate auxotrophic mutations at low frequency.     

Fine mapping of the chicken salmonellosis resistance locus (SAL1)

Salmonella enterica serovar Typhimurium is a Gram-negative bacterium that has a significant impact on both human and animal health. It is one of the most common food-borne pathogens responsible for a self-limiting gastroenteritis in humans and a similar disease in pigs, cattle and chickens. In contrast, intravenous challenge with S. Typhimurium provides a valuable model for systemic infection, often causing a typhoid-like infection, with bacterial replication resulting in the destruction of the spleen and liver of infected animals. Resistance to systemic salmonellosis in chickens is partly genetically determined, with bacterial numbers at systemic sites in resistant lines being up to 1000-fold fewer than in susceptible lines. Identification of genes contributing to disease resistance will enable genetic selection of resistant lines that will reduce Salmonella levels in poultry flocks. We previously identified a novel resistance locus on Chromosome 5, designated SAL1 . Through the availability of high-density SNP panels in the chicken, combined with advanced back-crossing of the resistant and susceptible lines, we sought to refine the SAL1 locus and identify potential positional candidate genes. Using a 6^th generation backcross mapping population, we have confirmed and refined the SAL1 locus as lying between 54.0 and 54.8 Mb on the long arm of Chromosome 5 ( F  = 8.72, P  = 0.00475). This region spans 14 genes, including two very striking functional candidates; CD27-binding protein ( Siva ) and the RAC -alpha serine/threonine protein kinase homolog , AKT1 ( protein kinase B , PKB ).