Target concentration dependence of DNA melting temperature on oligonucleotide microarrays

The design of microarrays is currently based on studies focusing on DNA hybridization reaction in bulk solution. However, the presence of a surface to which the probe strand is attached can make the solution‐based approximations invalid, resulting in sub‐optimum hybridization conditions. To determine the effect of surfaces on DNA duplex formation, the authors studied the dependence of DNA melting temperature (T_m) on target concentration. An automated system was developed to capture the melting profiles of a 25‐mer perfect‐match probe–target pair initially hybridized at 23°C. Target concentrations ranged from 0.0165 to 15 nM with different probe amounts (0.03–0.82 pmol on a surface area of 10¹⁸ Ų), a constant probe density (5 × 10¹² molecules/cm²) and spacer length (15 dT). The authors found that T_m for duplexes anchored to a surface is lower than in‐solution, and this difference increases with increasing target concentration. In a representative set, a target concentration increase from 0.5 to 15 nM with 0.82 pmol of probe on the surface resulted in a T_m decrease of 6°C when compared with a 4°C increase in solution. At very low target concentrations, a multi‐melting process was observed in low temperature domains of the curves. This was attributed to the presence of truncated or mismatch probes. © 2012 American Institute of Chemical Engineers Biotechnol. Prog., 2012     

A flexible light-directed DNA chip synthesis gated by deprotection using solution photogenerated acids

Oligonucleotide microarrays or oDNA chips are effective decoding and analytical tools for genomic sequences and are useful for a broad range of applications. Therefore, it is desirable to have synthesis methods of DNA chips that are highly flexible in sequence design and provide high quality and general adoptability. We report herein, DNA microarray synthesis based on a flexible biochip method. Our method simply uses photogenerated acid (PGA) in solution to trigger deprotection of the 5′-OH group in conventional nucleotide phosphoramidite monomers (i.e. PGA-gated deprotection), with the rest of the reactions in the synthesis cycle the same as those used for routine synthesis of oligonucleotides. The complete DNA chip synthesis process is accomplished on a regular DNA synthesizer that is coupled with a UV-VIS projection display unit for performing digital photolithography. Using this method, oDNA chips containing probes of newly discovered genes can be quickly and easily synthesized at high yields in a conventional laboratory setting. Furthermore, the PGA-gated chemistry should be applicable to microarray syntheses of a variety of combinatorial molecules, such as peptides and organic molecules.     

Cytophobic surface modification of microfluidic arrays for in situ parallel peptide synthesis and cell adhesion assays

A combination of PEG-based surface passivation techniques and spatially addressable SPPS (solid-phase peptide synthesis) was used to demonstrate a highly specific cell-peptide adhesion assay on a microfluidic platform. The surface of a silicon-glass microchip was modified to form a mixed self-assembled monolayer that presented PEG moieties interspersed with reactive amino terminals. The PEG provided biomolecular inertness and the reactive amino groups were used for consequent peptide synthesis. The cytophobicity of the surface was characterized by on-chip fluorescent binding assays and was found to be resistant to nonspecific attachment of cells and proteins. An integrated system for parallel peptide synthesis on this reactive amino surface was developed using photogenerated acid chemistry and digital microlithography. A constant synthesis efficiency of >98% was observed for up to 7mer peptides. To demonstrate specific cell adhesion on these synthetic peptide arrays, variations of a 7mer cell binding peptide that binds to murine B lymphoma cells were synthesized. Sequence-specific binding was observed on incubation with fluorescently labeled, intact murine B lymphoma cells, and key residues for binding were identified by deletional analysis.     

Simulation and visualization of flow pattern in microarrays for liquid phase oligonucleotide and peptide synthesis

Microfluidic microarrays have been developed for economical and rapid parallel synthesis of oligonucleotide and peptide libraries. For a synthesis system to be reproducible and uniform, it is crucial to have a uniform reagent delivery throughout the system. Computational fluid dynamics (CFD) is used to model and simulate the microfluidic microarrays to study geometrical effects on flow patterns. By proper design geometry, flow uniformity could be obtained in every microreactor in the microarrays.     

Microfluidic PicoArray synthesis of oligodeoxynucleotides and simultaneous assembling of multiple DNA sequences

Large DNA constructs of arbitrary sequences can currently be assembled with relative ease by joining short synthetic oligodeoxynucleotides (oligonucleotides). The ability to mass produce these synthetic genes readily will have a significant impact on research in biology and medicine. Presently, high-throughput gene synthesis is unlikely, due to the limits of oligonucleotide synthesis. We describe a microfluidic PicoArray method for the simultaneous synthesis and purification of oligonucleotides that are designed for multiplex gene synthesis. Given the demand for highly pure oligonucleotides in gene synthesis processes, we used a model to improve key reaction steps in DNA synthesis. The oligonucleotides obtained were successfully used in ligation under thermal cycling conditions to generate DNA constructs of several hundreds of base pairs. Protein expression using the gene thus synthesized was demonstrated. We used a DNA assembly strategy, i.e. ligation followed by fusion PCR, and achieved effective assembling of up to 10 kb DNA constructs. These results illustrate the potential of microfluidics-based ultra-fast oligonucleotide parallel synthesis as an enabling tool for modern synthetic biology applications, such as the construction of genome-scale molecular clones and cell-free large scale protein expression.     

Light-directed simultaneous synthesis of oligopeptides on microarray substrate using a photogenerated acid

Photogenerated acid (PGA) was used as the acid to remove the protection group from amino acids or peptide oligomers. Comparative study of the deprotection using a PGA, trisarylsulfonium antimonyhexafluoride (SSb), and trifluoroacetic acid (TFA) was performed on glass microscope slides. The results showed that PGA can replace TFA in the deprotection step of oligopeptide synthesis with comparable efficiencies. Acids needed for the deprotection step were generated in situ by light activation of the precursor molecule on the microwell substrate. A mask-less laser light illumination system was used to activate the precursor. The accuracy of the amino acid sequence of the synthesized oligopeptide and the location of the synthesis was illustrated by the specific recognition binding of two different models: lead(II) ion-peptide biosensor for lead(II) and human protein p53 (residue 20-25)-mouse MAb DO1. After parallel synthesis of the target peptide models and their analogues based on the predetermined pattern, specific binding treatment, and fluorescence labeling, the fluorescence emission images of the oligopeptide microarray showed fluorescence intensity as a result of specific binding at the correct locations of the array. The stepwise synthesis efficiencies of pentapeptide synthesis on the microwell substrate range are approximately 96-100% and do not decrease with respect to the chain length of the peptide.     

Individually addressable parallel peptide synthesis on microchips

Miniaturized, spatially addressable microchips of peptides and peptidomimetics are powerful tools for high-throughput biomedical and pharmaceutical research and the advancement of proteomics. Here we report an efficient and flexible method for the parallel synthesis of peptides on individually addressable microchips, using digital photolithography and photogenerated acid in the deprotection step. We demonstrate that we are able to synthesize thousands of peptides in a 1 cm(2) area on a microchip using 20 natural amino acids as well as synthetic amino acid analogs, with high stepwise yields and short reaction-cycle times. Epitope screening experiments using a p53 antibody (PAb240) produced clearly defined binding patterns. The peptidomimetic sequences on the microchip show specific antibody binding and provide insights into the molecular details responsible for specificity of epitope binding. Our approach requires just a conventional synthesizer and a computer-controllable optical module, thereby allowing potential development of peptide microchips for various pharmaceutical and proteomic applications in routine research laboratories.