Mixed Mode of Ligand-DNA Binding Results in S-Shaped Binding Curves

Abstract

S-shaped binding curves often characterize interactions of ligands with nucleic acid molecules as analyzed by different physicochemical and biophysical techniques. S-shaped experimental binding curves are usually interpreted as indicative of the positive cooperative interactions between the bound ligand molecules. This paper demonstrates that S-shaped binding curves may occur as a result of the “mixed mode” of DNA binding by the same ligand molecule. Mixed mode of the ligand-DNA binding can occur, for example, due to 1) isomerization or dimerization of the ligands in solution or on the DNA lattice, 2) their ability to intercalate the DNA and to bind it within the minor groove in different orientations. DNA- ligand complexes are characterized by the length of the ligand binding site on the DNA lattice (so-called “multiple-contact” model). We show here that if two or more complexes with different lengths of the ligand binding sites could be produced by the same ligand, the dependence of the concentration of the complex with the shorter length of binding site on the total concentration of ligand should be S-shaped. Our theoretical model is confirmed by comparison of the calculated and experimental CD binding curves for bis-netropsin binding to poly(dA-dT) poly(dA-dT). Bis-netropsin forms two types of DNA complexes due to its ability to interact with the DNA as monomers and trimers. Experimental S-shaped bis-netropsin-DNA binding curve is shown to be in good correlation with those calculated on the basis of our theoretical model. The present work provides new insight into the analysis of ligand-DNA binding curves.     

Effect of DNA supercoiling on the geometry of holliday junctions

Unusual DNA conformations including cruciforms play an important role in gene regulation and various DNA transactions. Cruciforms are also the models for Holliday junctions, the transient DNA conformations critically involved in DNA homologous and site-specific recombination, repair, and replication. Although the conformations of immobile Holliday junctions in linear DNA molecules have been analyzed with the use of various techniques, the role of DNA supercoiling has not been studied systematically. We utilized atomic force microscopy (AFM) to visualize cruciform geometry in plasmid DNA with different superhelical densities at various ionic conditions. Both folded and unfolded conformations of the cruciform were identified, and the data showed that DNA supercoiling shifts the equilibrium between folded and unfolded conformations of the cruciform toward the folded one. In topoisomers with low superhelical density, the population of the folded conformation is 50-80%, depending upon the ionic strength of the buffer and a type of cation added, whereas in the sample with high superhelical density, this population is as high as 98-100%. The time-lapse studies in aqueous solutions allowed us to observe the conformational transition of the cruciform directly. The time-dependent dynamics of the cruciform correlates with the structural changes revealed by the ensemble-averaged analysis of dry samples. Altogether, the data obtained show directly that DNA supercoiling is the major factor determining the Holliday junction conformation.     

An RNA microchip containing immobilized oligoribonucleotides with protective groups at 2'-O-positions

To analyze RNA interactions with RNA binding molecules an RNA microchip containing immobilized oligoribonucleotides with protective groups [t-butyldimethylsilyl (tBDMS)] at 2'-O- positions was developed. The oligonucleotides were immobilized within three-dimensional (3-D) hydrogel pads fixed on a glass support. The protective groups preserved the oligoribonucleodes from degradation and were suitable to be removed directly on the microchip when needed, right before its use. These immobilized, deprotected oligoribonucleotides were tested for their interaction with afluorescently labeled oligodeoxyribonucleotide and analyzed for their availability to be cleaved enzymatically by the RNase binase. Stability of tBDMS-protected immobilized oligoribonucleotides after 2.5 years of storage as well as after direct RNase action was also tested. Melting curves of short RNA/DNA hybrids that had formed into gel pads of the microchip were found to exhibit clearly defined S-like shapes, with the melting temperatures in full accordance with those theoretically predicted for the same ionic strength. This approach, based on keeping the protective groups attached to oligoribonucleotides, can be applied for manufacturing any RNA microchips containing immobilized oligoribonucleotides, including microchips with two-dimensional (2-D) features. These RNA microchips can be used to measure thermodynamic parameters of RNA/RNA or RNA/DNA duplexes as well as to study ligand- or protein-RNA interactions.     

A Fluorescent Dye with Low Specificity to DNA Nucleotide Sequences: Quantitative Assessment of Oligonucleotides Immobilized in Microchip Gel Pads

To assess the DNA amount in samples (e.g., in biological microchip gel pads) by means of fluorescent dyes, one should use the dyes whose fluorescence weakly depends on DNA composition and structure. With the ImD-310 dye created for this purpose, we have analyzed the staining of single- and double-stranded oligo- and polynucleotides of different nucleotide composition, length, and concentration both in solution and being immobilized in biological microchip gel pads. It turned out that ImD-310 has no pronounced specificity to the single- and double-stranded nucleotide sequences, while the intensity of fluorescence for the dye complexes with d(A)₈, d(T)₈, d(C)₈, and d(G)₈ at high temperatures (50°C) differs by less than 25%. A linear correlation has been established between the intensity of fluorescence and the amount of oligonucleotides immobilized on a biological microchip. The plots of the intensity of fluorescence against the concentration of NaCl and the temperature were obtained. By using a generic microchip containing all 4096 hexamer oligonucleotides, it has been determined that the dye has no distinct specificity to any certain motifs of the nucleotide sequence. Thus, ImD-310 may serve as an efficient fluorescent probe to quickly estimate the amount of oligonucleotides immobilized in a microchip, in an electrophoretic gel, etc.     

A trimeric DNA polymerase complex increases the native replication processivity

DNA polymerases are essential enzymes in all domains of life for both DNA replication and repair. The primary DNA replication polymerase from Sulfolobus solfataricus (SsoDpo1) has been shown previously to provide the necessary polymerization speed and exonuclease activity to replicate the genome accurately. We find that this polymerase is able to physically associate with itself to form a trimer and that this complex is stabilized in the presence of DNA. Analytical gel filtration and electrophoretic mobility shift assays establish that initially a single DNA polymerase binds to DNA followed by the cooperative binding of two additional molecules of the polymerase at higher concentrations of the enzyme. Protein chemical crosslinking experiments show that these are specific polymerase–polymerase interactions and not just separate binding events along DNA. Isothermal titration calorimetry and fluorescence anisotropy experiments corroborate these findings and show a stoichiometry where three polymerases are bound to a single DNA substrate. The trimeric polymerase complex significantly increases both the DNA synthesis rate and the processivity of SsoDpo1. Taken together, these results suggest the presence of a trimeric DNA polymerase complex that is able to synthesize long DNA strands more efficiently than the monomeric form.     

Interaction of Topotecan,DNA Topoisomerase I Inhibitor,with Double-stranded Polydeoxyribonucleotides. 3. Binding at the Minor Groove

Interaction of topotecan (TPT) with calf thymus DNA, coliphage T4 DNA, and poly(dGdC) · poly(dG-dC) was studied by optical (linear flow dichroism, UV-vis spectroscopy) and quantum chemical methods. The linear dichroism signal of TPT bound to DNA was shown to have positive sign in the range 260–295 nm. This means that the plane of quinoline fragment (rings A and B) of TPT forms an angle less than 54° with the long axis of DNA, and hence the TPT molecule cannot intercalate between DNA base pairs. TPT was established to bind to calf thymus DNA as readily as to coliphage T4 DNA whose cytosines in the major groove were all glycosylated at the 5th position. Consequently, the DNA major groove does not participate in TPT binding. TPT molecule was shown to compete with distamycin for binding sites in the minor groove of DNA and poly(dG-dC) · poly(dG-dC). Thus, it was demonstrated for the first time that TPT binds to DNA at its minor groove.     

Interaction of Topotecan,DNA Topoisomerase I Inhibitor,with Double-Stranded Polydeoxyribonucleotides. 2. Formation of Topotecan–DNA Complex Containing Several DNA Molecules

This study is a continuation of a series of papers dealing with topotecan interaction with double-stranded polydeoxyribonucleotides. We showed earlier that topotecan molecules form dimers in solution at concentration above 10^–5(per base pair). Topotecan interaction with calf thymus DNA in solutions of low ionic strength was studied by fluorescence, circular dichroism, and linear flow dichroism. The data obtained indicate that topotecan forms two types of complex with DNA, DNA molecules combining with each other during formation of one of these complexes. The association constant of two topotecan-filled DNA molecules with each other was estimated at 10⁴M^–1(per base pair) in 1 mM sodium cacodylate buffer, pH 6.8, at 20°C. A possibility of modulation of DNA topoisomerase I activity by topotecan due to complexation with several sites of a supercoiled DNA molecule is discussed.     

Mixed mode of ligand-DNA binding results in S-shaped binding curves

S-shaped binding curves often characterize interactions of ligands with nucleic acid molecules as analyzed by different physico-chemical and biophysical techniques. S-shaped experimental binding curves are usually interpreted as indicative of the positive cooperative interactions between the bound ligand molecules. This paper demonstrates that S-shaped binding curves may occur as a result of the "mixed mode" of DNA binding by the same ligand molecule. Mixed mode of the ligand-DNA binding can occur, for example, due to 1) isomerization or dimerization of the ligands in solution or on the DNA lattice, 2) their ability to intercalate the DNA and to bind it within the minor groove in different orientations. DNA-ligand complexes are characterized by the length of the ligand binding site on the DNA lattice (so-called "multiple-contact" model). We show here that if two or more complexes with different lengths of the ligand binding sites could be produced by the same ligand, the dependence of the concentration of the complex with the shorter length of binding site on the total concentration of ligand should be S-shaped. Our theoretical model is confirmed by comparison of the calculated and experimental CD binding curves for bis-netropsin binding to poly(dA-dT) poly(dA-dT). Bis-netropsin forms two types of DNA complexes due to its ability to interact with the DNA as monomers and trimers. Experimental S-shaped bis-netropsin-DNA binding curve is shown to be in good correlation with those calculated on the basis of our theoretical model. The present work provides new insight into the analysis of ligand-DNA binding curves.     

Binding of symmetrical cyanine dyes into the DNA minor groove

Optical methods, such as fluorescence, circular dichroism and linear flow dichroism, were used to study the binding to DNA of four symmetrical cyanine dyes, each consisting of two identical quinoline, benzthiazole, indole, or benzoxazole fragments connected by a trimethine bridge. The ligands were shown to form a monomer type complex into the DNA minor groove. The complex of quinoline-containing ligand with calf thymus DNA appeared to be the most resistant to ionic strength, and it did not dissociate completely even in 1 M NaCl. Binding of cyanine dyes to DNA could also be characterized by possibility to form ligand dimers into the DNA minor groove, by slight preference of binding to AT pairs, as well as by possible intercalation between base pairs of poly(dG)-poly(dC). The correlation found between the binding constants to DNA and the extent of cyanine dyes hydrophobicity estimated as the n-octanol/water partition coefficient is indicative of a significant role of hydrophobic interactions for the ligand binding into the DNA minor groove.     

Protein interactions and misfolding analyzed by AFM force spectroscopy

Protein misfolding is conformational transition dramatically facilitating the assembly of protein molecules into aggregates of various morphologies. Spontaneous formation of specific aggregates, mostly amyloid fibrils, was initially believed to be limited to proteins involved in the development of amyloidoses. However, recent studies show that, depending on conditions, the majority of proteins undergo structural transitions leading to the appearance of amyloidogenic intermediates followed by aggregate formation. Various techniques have been used to characterize the protein misfolding facilitating the aggregation process, but no direct evidence as to how such a conformational transition increases the intermolecular interactions has been obtained as of yet. We have applied atomic force microscopy (AFM) to follow the interaction between protein molecules as a function of pH. These studies were performed for three unrelated and structurally distinctive proteins, alpha-synuclein, amyloid beta-peptide (Abeta) and lysozyme. It was shown that the attractive force between homologous protein molecules is minimal at physiological pH and increases dramatically at acidic pH. Moreover, the dependence of the pulling forces is sharp, suggesting a pH-dependent conformational transition within the protein. Parallel circular dichroism (CD) measurements performed for alpha-synuclein and Abeta revealed that the decrease in pH is accompanied by a sharp conformational transition from a random coil at neutral pH to the more ordered, predominantly beta-sheet, structure at low pH. Importantly, the pH ranges for these conformational transitions coincide with those of pulling forces changes detected by AFM. In addition, protein self-assembly into filamentous aggregates studied by AFM imaging was shown to be facilitated at pH values corresponding to the maximum of pulling forces. Overall, these results indicate that proteins at acidic pH undergo structural transition into conformations responsible for the dramatic increase in interprotein interaction and promoting the formation of protein aggregates.