Sensitization of mice with wild-type and cold-adapted influenza virus variants: immune response to two H1N1 and H3N2 viruses

Two A strain influenza viruses, A/Hong Kong/123/77 (A/HK/123/77) (H1N1) and A/Queensland/6/72 (A/Qld/6/72) (H3N2), and the two cold-adapted reassortants which possess the surface antigens of these strains (CR35 and CR6, respectively) were tested for their ability both to induce primary cytotoxic T-cell (Tc cell) responses in mice and to sensitize mice for a second Tc cell response when challenged with a distantly related A strain virus, A/Shearwater/72 (H6N5). After intranasal inoculation, A/Qld/6/72 replicated to higher titers in the lung (1 to 2 log10 50% egg infective doses) than did A/HK/123/77 or either of the reassortants. A/Qld/6/72 induced higher Tc cell responses in the lung than did CR6, and both were more effective than either A/HK/123/77 or CR35 in this respect. When similar doses (10 or 10(3) hemagglutinin units) of each virus were injected intravenously into mice and the spleens were tested for Tc cell activity 6 days later, both A/Qld/6/72 and CR6 were ca. 100-fold better at inducing a primary Tc cell response than A/HK/123/77 or CR35. In contrast, the H1N1 and H3N2 viruses gave rather similar anti-hemagglutinin antibody titers (after intravenous injection) and delayed-type hypersensitivity reactions (after subcutaneous injection). If mice were primed with a low dose of these viruses (10(4) 50% egg infective doses intranasally), A/Qld/6/72 and CR6 were more effective than A/HK/123/77 or CR35 at sensitizing for a secondary Tc cell response when challenged with A/Shearwater/72, but if larger doses were given either intranasally (10(6) 50% egg infective doses) or intravenously (10 to 10(3) hemagglutinin units), all viruses sensitized the mice equally well, despite the fact the A/Shearwater/72 gives a poor primary Tc cell response in mice. Thus, the viral glycoprotein antigens can be important in determining the immunogenicity of the virus and, particularly, the class I antigen-restricted Tc cell response of the host.     

Sphingosine kinase 1 regulates HMGB1 translocation by directly interacting with calcium/calmodulin protein kinase II-δ in sepsis-associated liver injury

Previously, we confirmed that sphingosine kinase 1 (SphK1) inhibition improves sepsis-associated liver injury. High-mobility group box 1 (HMGB1) translocation participates in the development of acute liver failure. However, little information is available on the association between SphK1 and HMGB1 translocation during sepsis-associated liver injury. In the present study, we aimed to explore the effect of SphK1 inhibition on HMGB1 translocation and the underlying mechanism during sepsis-associated liver injury. Primary Kupffer cells and hepatocytes were isolated from SD rats. The rat model of sepsis-associated liver damage was induced by intraperitoneal injection with lipopolysaccharide (LPS). We confirmed that Kupffer cells were the cells primarily secreting HMGB1 in the liver after LPS stimulation. LPS-mediated HMGB1 expression, intracellular translocation, and acetylation were dramatically decreased by SphK1 inhibition. Nuclear histone deacetyltransferase 4 (HDAC4) translocation and E1A-associated protein p300 (p300) expression regulating the acetylation of HMGB1 were also suppressed by SphK1 inhibition. HDAC4 intracellular translocation has been reported to be controlled by the phosphorylation of HDAC4. The phosphorylation of HDAC4 is modulated by CaMKII-δ. However, these changes were completely blocked by SphK1 inhibition. Additionally, by performing coimmunoprecipitation and pull-down assays, we revealed that SphK1 can directly interact with CaMKII-δ. The colocalization of SphK1 and CaMKII-δ was verified in human liver tissues with sepsis-associated liver injury. In conclusion, SphK1 inhibition diminishes HMGB1 intracellular translocation in sepsis-associated liver injury. The mechanism is associated with the direct interaction of SphK1 and CaMKII-δ.Subject terms: Hepatotoxicity, Sepsis     

Amphiphilic cationic peptides mediate cell adhesion to plastic surfaces

Four amphiphilic peptides, each with net charges of +2 or more at neutrality and molecular weights under 4 kilodaltons, were found to mediate the adhesion of normal rat kidney fibroblasts to polystyrene surfaces. Two of these peptides, a model for calcitonin (peptide 1, MCT) and melittin (peptide 2, MEL), form amphiphilic alpha-helical structures at aqueous/nonpolar interfaces. The other two, a luteinizing hormone-releasing hormone model (peptide 3, LHM) and a platelet factor model (peptide 4, MPF) form beta-strand structures in amphiphilic environments. Although it contains only 10 residues, LHM mediated adhesion to surfaces coated with solutions containing as little as 10 pmoles/ml of peptide. All four of these peptides were capable of forming monolayers at air-buffer interfaces with collapse pressures greater than 20 dynes/cm. None of these four peptides contains the tetrapeptide sequence Arg-Gly-Asp-Ser, which has been associated with fibronectin-mediated cell adhesion. Ten polypeptides that also lacked the sequence Arg-Gly-Asp-Ser but were nonamphiphilic and/or had net charges less than +2 at neutrality were all incapable of mediating cell adhesion (Pierschbacher and Ruoslahti, 1984). The morphologies of NRK cells spread on polystyrene coated with peptide LHM resemble the morphologies on fibronectin-coated surfaces, whereas cells spread on surfaces coated with MCT or MEL exhibit strikingly different morphologies. The adhesiveness of MCT, MEL, LHM, and MPF implies that many amphiphilic cationic peptides could prove useful as well defined adhesive substrata for cell culture and for studies of the mechanism of cell adhesion.     

Cytosolic HMGB1 Mediates Autophagy Activation in an Emulsified Isoflurane Anesthesia Cell Model

Neurochemical Research - Inhalation anesthetic isoflurane may cause an increased risk of cognitive impairment. Previous studies have indicated that this cognitive decline is associated with...     

A cross-talk between epithelium and endothelium mediates human alveolar–capillary injury during SARS-CoV-2 infection

COVID-19, caused by SARS-CoV-2, is an acute and rapidly developing pandemic, which leads to a global health crisis. SARS-CoV-2 primarily attacks human alveoli and causes severe lung infection and damage. To better understand the molecular basis of this disease, we sought to characterize the responses of alveolar epithelium and its adjacent microvascular endothelium to viral infection under a co-culture system. SARS-CoV-2 infection caused massive virus replication and dramatic organelles remodeling in alveolar epithelial cells, alone. While, viral infection affected endothelial cells in an indirect manner, which was mediated by infected alveolar epithelium. Proteomics analysis and TEM examinations showed viral infection caused global proteomic modulations and marked ultrastructural changes in both epithelial cells and endothelial cells under the co-culture system. In particular, viral infection elicited global protein changes and structural reorganizations across many sub-cellular compartments in epithelial cells. Among the affected organelles, mitochondrion seems to be a primary target organelle. Besides, according to EM and proteomic results, we identified Daurisoline, a potent autophagy inhibitor, could inhibit virus replication effectively in host cells. Collectively, our study revealed an unrecognized cross-talk between epithelium and endothelium, which contributed to alveolar–capillary injury during SARS-CoV-2 infection. These new findings will expand our understanding of COVID-19 and may also be helpful for targeted drug development.Subject terms: Mechanisms of disease, Viral infection     

Compatible Models of Carbon Content of Individual Trees on a Cunninghamia lanceolata Plantation in Fujian Province,China

We tried to establish compatible carbon content models of individual trees for a Chinese fir (Cunninghamia lanceolata (Lamb.) Hook.) plantation from Fujian province in southeast China. In general, compatibility requires that the sum of components equal the whole tree, meaning that the sum of percentages calculated from component equations should equal 100%. Thus, we used multiple approaches to simulate carbon content in boles, branches, foliage leaves, roots and the whole individual trees. The approaches included (i) single optimal fitting (SOF), (ii) nonlinear adjustment in proportion (NAP) and (iii) nonlinear seemingly unrelated regression (NSUR). These approaches were used in combination with variables relating diameter at breast height (D) and tree height (H), such as D, D²H, DH and D&H (where D&H means two separate variables in bivariate model). Power, exponential and polynomial functions were tested as well as a new general function model was proposed by this study. Weighted least squares regression models were employed to eliminate heteroscedasticity. Model performances were evaluated by using mean residuals, residual variance, mean square error and the determination coefficient. The results indicated that models with two dimensional variables (DH, D²H and D&H) were always superior to those with a single variable (D). The D&H variable combination was found to be the most useful predictor. Of all the approaches, SOF could establish a single optimal model separately, but there were deviations in estimating results due to existing incompatibilities, while NAP and NSUR could ensure predictions compatibility. Simultaneously, we found that the new general model had better accuracy than others. In conclusion, we recommend that the new general model be used to estimate carbon content for Chinese fir and considered for other vegetation types as well.     

Can transposable element copy number distribution parameters be estimated from natural populations of Drosophila melanogaster?

The copy frequency distribution of a transposable element family in a Drosophila melanogaster natural population is generally characterised by the values of the Charlesworths' model parameters α and β (Charlesworth & Charlesworth, 1983). The estimation of these parameters is made using the observed distribution of the occupied sites in a population sample. Several results have been interpreted as due either to the influence of stochastic factors or to deterministic factors (transposition, excision, selection…). The accuracy of this method was tested by estimations performed on samples from simulated populations. The results show that with the sample size usually used for natural population studies, the confidence intervals are too large to reasonably deduce either the element copy number distribution or the values of transposition and excision rate and selective coefficients.