Lipase-catalyzed dimethyl adipate synthesis: Response surface modeling and kinetics

Dimethyl adipate (DMA) was synthesized by immobilized Candida antarctica lipase B-catalyzed esterification of adipic acid and methanol. To optimize the reaction conditions of ester production, response surface methodology was applied, and the effects of four factors namely, time, temperature, enzyme concentration, and molar ratio of substrates on product synthesis were determined. A statistical model predicted that the maximum conversion yield would be 97.6%, at the optimal conditions of 58.5°C, 54.0 mg enzyme, 358.0 min, and 12:1 molar ratio of methanol to adipic acid. The R² (0.9769) shows a high correlation between predicted and experimental values. The kinetics of the reaction was also investigated in this study. The reaction was found to obey the ping-pong bi-bi mechanism with methanol inhibition. The kinetic parameters were determined and used to simulate the experimental results. A good quality of fit was observed between the simulated and experimental initial rates.     

A potential tocopherol acetate loaded palm oil esters-in-water nanoemulsions for nanocosmeceuticals

Background  

Cosmeceuticals are cosmetic-pharmaceutical hybrids intended to enhance health and beauty of the skin. Nanocosmeceuticals use nano-sized system for the delivery of active ingredients to the targeted cells for better penetration. In this work, nanoemulsion from palm oil esters was developed as a delivery system to produce nanocosmeceuticals. The stability of the resulting formulation was tested using various methods. In addition, the effect of components i.e. Vitamin E and Pluronic F-68 on the formulation was also studied.     

A new organic solvent tolerant protease from <Emphasis Type="Italic">Bacillus pumilus</Emphasis> 115b

Five out of the nine benzene–toulene–ethylbenzene-xylene (BTEX) tolerant bacteria that demonstrated high protease activity on skim milk agar were isolated. Among them, isolate 115b identified as Bacillus pumilus exhibited the highest protease production. The protease produced was stable in 25% (v/v) benzene and toluene and it was activated 1.7 and 2.5- fold by n-dodecane and n-tetradecane, respectively. The gene encoding the organic solvent tolerant protease was cloned and its nucleotide sequence determined. Sequence analysis revealed an open reading frame (ORF) of 1,149 bp that encoded a polypeptide of 383 amino acid residues. The polypeptide composed of 29 residues of signal peptide, a propeptide of 79 residues and a mature protein of 275 amino acids with a calculated molecular mass of 27,846 Da. This is the only report available to date on organic solvent tolerant protease from B. pumilus.     

<Emphasis Type="Italic">Geobacillus zalihae</Emphasis> sp. nov., a thermophilic lipolytic bacterium isolated from palm oil mill effluent in Malaysia

Background  

Thermophilic Bacillus strains of phylogenetic Bacillus rRNA group 5 were described as a new genus Geobacillus. Their geographical distribution included oilfields, hay compost, hydrothermal vent or soils. The members from the genus Geobacillus have a growth temperatures ranging from 35 to 78°C and contained iso-branched saturated fatty acids (iso-15:0, iso-16:0 and iso-17:0) as the major fatty acids. The members of Geobacillus have similarity in their 16S rRNA gene sequences (96.5–99.2%). Thermophiles harboring intrinsically stable enzymes are suitable for industrial applications. The quest for intrinsically thermostable lipases from thermophiles is a prominent task due to the laborious processes via genetic modification.     

Nutritional factors affecting organic solvent-tolerant alkaline protease production by a newBacillus cereus strain 146

An organic solvent-tolerant bacterium designated as 146 capable of producing an organic solvent-stable alkaline protease was isolated from contaminated soil of a wood factory. The strain was a Gram-positive, spore-forming, nitrate-positive, rod-shaped organism capable of hydrolysing gelatine, starch, skim milk and identified asBacillus cereus. Activity of the protease was drastically increased in the presence of 1–decanol, isooctane, n-dodecane and n-tetradecane, but reduced in the presence of ethyl acetate, benzene, toluene, 1-heptanol, ethylbenzene and hexane. The bacterium was shown to require lactose as a carbon source and peptone as a nitrogen source. The optimum fermentation condition for the production of alkaline protease was in the presence of beef and yeast extract. Optimum pH was determined to be at 10.0 at incubation temperature of 37 °C for 48 h. Results from the studies suggest that 146 is a new strain of Bacillus cereus capable of producing organic solvent-tolerant alkaline protease with potential use in industries.     

Biodegradation of hydrocarbon contamination by immobilized bacterial cells

This study examined the capacity of immobilized bacteria to degrade petroleum hydrocarbons. A mixture of hydrocarbon-degrading bacterial strains was immobilized in alginate and incubated in crude oil-contaminated artificial seawater (ASW). Analysis of hydrocarbon residues following a 30-day incubation period demonstrated that the biodegradation capacity of the microorganisms was not compromised by the immobilization. Removal of n-alkanes was similar in immobilized cells and control cells. To test reusability, the immobilized bacteria were incubated for sequential increments of 30 days. No decline in biodegradation capacity of the immobilized consortium of bacterial cells was noted over its repeated use. We conclude that immobilized hydrocarbon-degrading bacteria represent a promising application in the bioremediation of hydrocarbon-contaminated areas.     

Unveiling Amyloid-β<Subscript>1–42</Subscript> Interaction with Zinc in Water and Mixed Hexafluoroisopropanol Solution in Alzheimer’s Disease

Alzheimer’s disease (AD) is a neurodegenerative disorder caused by overproduction and accumulation of amyloid beta-peptide (Aβ). The hallmarks associated with this AD are the presence of Aβ plaques between the nerve cell in the brain which leading to synaptic loss in memory. The amyloid plaques contain of transition metals like zinc, copper and iron. In a healthy brain, the metal ions are present in balance concentration. High concentrations of Zn are normally released during neurotransmission process. The release of Zn might cause the aggregation of Aβ leading to AD. Amyloid-β_1–42 is the main type of Aβ in amyloid plaque. There still have limited explanation on how Aβ_1–42 interaction with Zn metal, as well as the effect of Zn metal on the Aβ structure in different solvents in atomic detail. Therefore, we investigated the structural changes of Aβ_1–42 in water (Aβ-H₂O) and the mixed hexafluoroisopropanol (HFIP) with water (Aβ-HFIP/H₂O). The mixed solvent consisted of hexafluoroisopropanol (HFIP) and water was used with the ratio of HFIP:H₂O (80:20). The effect of zinc ion was also examined for the interaction of Aβ peptide with zinc in water (Aβ-Zn-H₂O) and mixed solvent (Aβ-Zn-HFIP/H₂O) using all atom level molecular dynamics (MD) calculations for 1 μs. We found that Aβ-Zn-HFIP/H₂O contained more α-helix compared to Aβ-HFIP/H₂O while Aβ-H₂O and Aβ-Zn-H₂O produced well-dissolved structure and they contained more β-sheets. β-turns are possible to bind with the receptor proteins and may induce the aggregation process in AD. Thus, Aβ-H₂O and Aβ-Zn-H₂O have higher possibility leading to AD compared to Aβ-Zn-HFIP/H₂O and Aβ-HFIP/H₂O models.     

Trends in First-Line Antiretroviral Therapy in Asia: Results from the TREAT Asia HIV Observational Database

Background

Antiretroviral therapy (ART) has evolved rapidly since its beginnings. This analysis describes trends in first-line ART use in Asia and their impact on treatment outcomes.

Methods

Patients in the TREAT Asia HIV Observational Database receiving first-line ART for ≥6 months were included. Predictors of treatment failure and treatment modification were assessed.

Results

Data from 4662 eligible patients was analysed. Patients started ART in 2003–2006 (n = 1419), 2007–2010 (n = 2690) and 2011–2013 (n = 553). During the observation period, tenofovir, zidovudine and abacavir use largely replaced stavudine. Stavudine was prescribed to 5.8% of ART starters in 2012/13. Efavirenz use increased at the expense of nevirapine, although both continue to be used extensively (47.5% and 34.5% of patients in 2012/13, respectively). Protease inhibitor use dropped after 2004. The rate of treatment failure or modification declined over time (22.1 [95%CI 20.7–23.5] events per 100 patient/years in 2003–2006, 15.8 [14.9–16.8] in 2007–2010, and 11.6 [9.4–14.2] in 2011–2013). Adjustment for ART regimen had little impact on the temporal decline in treatment failure rates but substantially attenuated the temporal decline in rates of modification due to adverse event. In the final multivariate model, treatment modification due to adverse event was significantly predicted by earlier period of ART initiation (hazard ratio 0.52 [95%CI 0.33–0.81], p = 0.004 for 2011–2013 versus 2003–2006), older age (1.56 [1.19–2.04], p = 0.001 for ≥50 years versus <30years), female sex (1.29 [1.11–1.50], p = 0.001 versus male), positive hepatitis C status (1.33 [1.06–1.66], p = 0.013 versus negative), and ART regimen (11.36 [6.28–20.54], p<0.001 for stavudine-based regimens versus tenofovir-based).

Conclusions

The observed trends in first-line ART use in Asia reflect changes in drug availability, global treatment recommendations and prescriber preferences over the past decade. These changes have contributed to a declining rate of treatment modification due to adverse event, but not to reductions in treatment failure.     

Analysis of Comparative Sequence and Genomic Data to Verify Phylogenetic Relationship and Explore a New Subfamily of Bacterial Lipases

Thermostable and organic solvent-tolerant enzymes have significant potential in a wide range of synthetic reactions in industry due to their inherent stability at high temperatures and their ability to endure harsh organic solvents. In this study, a novel gene encoding a true lipase was isolated by construction of a genomic DNA library of thermophilic Aneurinibacillus thermoaerophilus strain HZ into Escherichia coli plasmid vector. Sequence analysis revealed that HZ lipase had 62% identity to putative lipase from Bacillus pseudomycoides. The closely characterized lipases to the HZ lipase gene are from thermostable Bacillus and Geobacillus lipases belonging to the subfamily I.5 with ≤ 57% identity. The amino acid sequence analysis of HZ lipase determined a conserved pentapeptide containing the active serine, GHSMG and a Ca²⁺-binding motif, GCYGSD in the enzyme. Protein structure modeling showed that HZ lipase consisted of an α/β hydrolase fold and a lid domain. Protein sequence alignment, conserved regions analysis, clustal distance matrix and amino acid composition illustrated differences between HZ lipase and other thermostable lipases. Phylogenetic analysis revealed that this lipase represented a new subfamily of family I of bacterial true lipases, classified as family I.9. The HZ lipase was expressed under promoter P_lac using IPTG and was characterized. The recombinant enzyme showed optimal activity at 65°C and retained ≥ 97% activity after incubation at 50°C for 1h. The HZ lipase was stable in various polar and non-polar organic solvents.     

Optimisation of rhamnolipids produced byPseudomonas aeruginosa 181 using Response Surface Modeling

This work investigated the optimisation of the fermented culture medium for maximisation of rhamnolipids production produced byPseudomonas aeruginosa 181 using Response Surface Modeling (RSM). A two full factorial central composite experimental design was used in the design of experiments and in the analysis of results. This procedure limited the number of actual experiments performed while allowing for possible interactions between the parameters (pH, stirring rate, casamino acid concentration and incubation period) on the production of biosurfactants. Production carried out at larger volumes of one litre using Bioreactor under RSM-optimised conditions yielded 3.61 g l^?1 of products after purification by acid precipitation.