Pluripotency of embryonic stem cells lacking clathrin-mediated endocytosis cannot be rescued by restoring cellular stiffness

Mouse embryonic stem cells (mESCs) display unique mechanical properties, including low cellular stiffness in contrast to differentiated cells, which are stiffer. We have previously shown that mESCs lacking the clathrin heavy chain (Cltc), an essential component for clathrin-mediated endocytosis (CME), display a loss of pluripotency and an enhanced expression of differentiation markers. However, it is not known whether physical properties such as cellular stiffness also change upon loss of Cltc, similar to what is seen in differentiated cells, and if so, how these altered properties specifically impact pluripotency. Using atomic force microscopy (AFM), we demonstrate that mESCs lacking Cltc display higher Young''s modulus, indicative of greater cellular stiffness, compared with WT mESCs. The increase in stiffness was accompanied by the presence of actin stress fibers and accumulation of the inactive, phosphorylated, actin-binding protein cofilin. Treatment of Cltc knockdown mESCs with actin polymerization inhibitors resulted in a decrease in the Young''s modulus to values similar to those obtained with WT mESCs. However, a rescue in the expression profile of pluripotency factors was not obtained. Additionally, whereas WT mouse embryonic fibroblasts could be reprogrammed to a state of pluripotency, this was inhibited in the absence of Cltc. This indicates that the presence of active CME is essential for the pluripotency of embryonic stem cells. Additionally, whereas physical properties may serve as a simple readout of the cellular state, they may not always faithfully recapitulate the underlying molecular fate.     

Microstructured cystine dendrites-based impedimetric sensor for nucleic acid detection

We report results of the studies relating to the fabrication and characterization of novel biosensing electrode by covalent immobilization of DNA onto microstructural cystine (Cys) prepared by acoustic cavitation method. The TEM investigations of these structures reveal transformation of microstructured Cys from nanorods to dendritic structure under optimum conditions. The Cys dendrites (denCys) have been investigated by XRD, FT-IR, and SEM studies. These biosensing electrodes have been fabricated by immobilization of Escherichia coli (E. coli)-specific DNA probe onto the dendritic cystine. The results of the electrochemical impedance spectroscopy studies reveal that this nucleic acid sensor exhibits linear response to cDNA in the concentration range of 10(-6) to 10(-14) M with response time of 30 min. The biosensing characteristics show that the fabricated E. coli sensor can be reused about 4 times and is stable for ～4 weeks. The studies on cross-reactivity of the sensor for other water-borne pathogens like Salmonella typhimurium, Neisseria meningitides, and Klebsiella pneumonia reveal specificity of the bioelectrode for E. coli detection.     

Extensive DNA mimicry by the ArdA anti-restriction protein and its role in the spread of antibiotic resistance

The ardA gene, found in many prokaryotes including important pathogenic species, allows associated mobile genetic elements to evade the ubiquitous Type I DNA restriction systems and thereby assist the spread of resistance genes in bacterial populations. As such, ardA contributes to a major healthcare problem. We have solved the structure of the ArdA protein from the conjugative transposon Tn916 and find that it has a novel extremely elongated curved cylindrical structure with defined helical grooves. The high density of aspartate and glutamate residues on the surface follow a helical pattern and the whole protein mimics a 42-base pair stretch of B-form DNA making ArdA by far the largest DNA mimic known. Each monomer of this dimeric structure comprises three alpha–beta domains, each with a different fold. These domains have the same fold as previously determined proteins possessing entirely different functions. This DNA mimicry explains how ArdA can bind and inhibit the Type I restriction enzymes and we demonstrate that 6 different ardA from pathogenic bacteria can function in Escherichia coli hosting a range of different Type I restriction systems.     

Mannich reaction: an approach for the synthesis of water soluble mulundocandin analogues

Semisynthetic modifications at Hydroxy tyrosine (Htyr) unit of mulundocandin (1) were carried out to improve its aqueous solubility. A single step introduction of substituted aminomethyl groups at the ortho position(s) of phenolic hydroxyl of HTyr unit of mulundocandin has been achieved in 7-85% yield. The in vitro screening of Mannich products against Candida albicans and Aspergillus fumigatus, retained the in vivo activity of parent by oral and intraperitoneal route. Compound 20, showed significant improvement in activity over mulundocandin (1) and activity compares well with that of fluconazole.     

Emerging Trends in Microfluidics Based Devices

One of the major challenges for scientists and engineers today is to develop technologies for the improvement of human health in both developed and developing countries. However, the need for cost‐effective, high‐performance diagnostic techniques is very crucial for providing accessible, affordable, and high‐quality healthcare devices. In this context, microfluidic‐based devices (MFDs) offer powerful platforms for automation and integration of complex tasks onto a single chip. The distinct advantage of MFDs lies in precise control of the sample quantities and flow rate of samples and reagents that enable quantification and detection of analytes with high resolution and sensitivity. With these excellent properties, microfluidics (MFs) have been used for various applications in healthcare, along with other biological and medical areas. This review focuses on the emerging demands of MFs in different fields such as biomedical diagnostics, environmental analysis, food and agriculture research, etc., in the last three or so years. It also aims to reveal new opportunities in these areas and future prospects of commercial MFDs.     

Molecularly imprinted polyaniline film for ascorbic acid detection

Molecularly imprinted polyaniline (PANI) film (～ 100 nm thick) has been electrochemically fabricated onto indium-tin-oxide (ITO) coated glass plate using ascorbic acid (AA) as template molecule. Fourier transform infra-red spectroscopy, scanning electron microscopy, cyclic voltammetry and differential pulse voltammetry (DPV) studies indicate the presence of AA in PANI matrix, which also acts as a dopant for PANI. Further, the AA selective molecularly imprinted PANI electrode (AA-MI-PANI/ITO) has been developed via over-oxidation of AA doped PANI electrode which leads to the removal of AA moieties from PANI film. The response studies using DPV technique have revealed that this molecularly imprinted AA-MI-PANI/ITO electrode can detect AA in the range of 0.05-0.4 mM with detection limit of 0.018 mM and sensitivity of 1.2 × 10(-5) AmM(-1). Interestingly, this AA-MI-PANI/ITO electrode shows excellent reusability, selectivity and stability.     

Hepatitis B Virus Infection in HIV-Positive Individuals in the UK Collaborative HIV Cohort (UK CHIC) Study

Background

Hepatitis B virus (HBV) infection is an increasingly important cause of morbidity and mortality in HIV-infected adults. This study aimed to determine the prevalence and incidence of HBV in the UK CHIC Study, a multicentre observational cohort.

Methods and Findings

12 HIV treatment centres were included. Of 37,331 patients, 27,450 had at least one test (HBsAg, anti-HBs or anti-HBc) result post-1996 available. 16,043 were white, 8,130 black and 3,277 other ethnicity. Route of exposure was homosexual sex 15,223 males, heterosexual sex 3,258 males and 5,384 females, injecting drug use 862 and other 2,723. The main outcome measures used were the cumulative prevalence and the incidence of HBV coinfection. HBV susceptible patients were followed up until HBsAg and/or anti-HBc seroconversion incident infection, evidence of vaccination or last visit. Poisson regression was used to determine associated factors. 25,973 had at least one HBsAg test result. Participants with HBsAg results were typically MSM (57%) and white (59%) (similar to the cohort as a whole). The cumulative prevalence of detectable HBsAg was 6.9% (6.6 to 7.2%). Among the 3,379 initially HBV-susceptible patients, the incidence of HBV infection was 1.7 (1.5 to 1.9)/100 person-years. Factors associated with incident infection were older age and IDU. The main limitation of the study was that 30% of participants did not have any HBsAg results available. However baseline characteristics of those with results did not differ from those of the whole cohort. Efforts are on-going to improve data collection.

Conclusions

The prevalence of HBV in UK CHIC is in line with estimates from other studies and low by international standards. Incident infection continued to occur even after entry to the cohort, emphasising the need to ensure early vaccination.     

Semisynthetic modifications of hemiaminal function at ornithine unit of mulundocandin, towards chemical stability and antifungal activity

Mulundocandin (1), is an echinocandin class of lipopeptide. It has wide spectrum of antifungal activity against Candida and Aspergillus species. Semisynthetic modification at Ornithine-5-hydroxyl (hemiaminal function) of 1 was carried out to improve solution stability and hence in vivo activity. Synthesis of ether (C-OR), thioether (C-SR) and C-N linkage at hemiaminal function have been described. All synthetic analogues were evaluated for their stability in aqueous solution and found to be more stable than mulundocandin. Antifungal activity of Orn-5 analogues was evaluated both in vitro against Candida albicans and Aspergillus fumigatus by agar well method and in vivo (oral and intraperitoneal) in C. albicans infected Swiss mice. Results of in vivo assays of analogues 2-9 by the oral route suggests that the introduction of either oxygen nucleophiles (-OR) or sulphur nucleophiles (-SR), at either Orn-5 or at both Orn-5 and HTyr-4 positions, results in retaining the activity of the parent compound with improved aqueous stability in most cases. Compound 9 has shown improved antifungal activity in comparison to mulundocandin by oral application in Swiss mice.