A new simple preparation method for NaK-ATPase-rich membrane fragments

A method for the isolation of highly active membrane bound NaK-ATPase without detergents in quantity from the electric organ of the electric eel (Electrophorus electricus) is described. This method consists of the homogenation of electric organ with an isotonic solution containing sucrose, histidine, EDTA, and arginine, and of the separation of the higher active membrane fraction from the microsomal fraction by density gradient centrifugation. The enzyme has a specific activity of about 20 μmol Pi/min/mg at 37°C, and 13 μmol Pi/min/mg at 30°C. Although it is not as pure as the detergent-treated enzyme preparation based on the level of phosphorylated protein, ouabain binding, or sodium dodecyl sulfate-polyacrylamide gel electrophoresis, its enzyme activity is comparable to that of the purified enzymes. This preparation is very stable and is able to change its medium by Sephadex chromatography without any loss of enzyme activity and protein content. This preparation is also expected to keep the original characteristics as well as the enzyme in the tissue.     

Phosphorylated intermediates of Na,K-ATPase proteoliposomes controlled by bilayer cholesterol. Interaction with cardiac steroid

Fragmental Na,K-ATPase from the electric eel forms three phosphorylated intermediates (EP) with MgATP and Na+: ADP-sensitive K+-insensitive EP (E1P), ADP- and K+-sensitive EP (E*P), and K+-sensitive ADP-insensitive EP (E2P). The EP composition varied with the Na+ concentration. In the reconstituted Na,K-ATPase proteoliposomes (PL), the EP composition of the inside-out form was controlled not only by the intravesicular (extracellular) Na+ concentration, but also by the temperature and the cholesterol content of the lipid bilayer. When the lipid bilayer of PL contained less than 30 mol % cholesterol, the E*P content did not change significantly while the E2P content increased with an elevation in temperature (3-20 degrees C). In contrast, when the lipid bilayer contains more than 35 mol % cholesterol, the E*P content increased while the E2P content stayed less than 10% under the same temperature change. These observations suggest that a high cholesterol content in the lipid bilayer interferes with the E*P to E2P conversion. This cholesterol effect was reversed by ionophores (monensin, nigericin, and A23187). Therefore, E1P-rich EP, E*P-rich EP, or E2P-rich EP could be obtained in the PL under a constant Na+ concentration by using various concentrations of cholesterol and ionophores. The reaction between the proteoliposomal EPs and digitoxigenin (lipid-soluble cardiac steroid) occurred in a single turnover, thereby avoiding unphysiologically high Na+ concentrations. The increase in the ADP- and K+-insensitive EP, which indicated formation of the digitoxigenin-Na,K-ATPase complex, was equivalent to the decrease in the E*P under six different sets of conditions, without any significant change in the E1P and E2P contents. This result indicated that E*P is the active intermediate of the Na,K-ATPase for cardiac steroid binding. Although the E2P has been thought to be the active form for binding, it cannot bind with the cardiac steroid in the presence of Na+ and in the absence of free Mg2+.     

Construction of protocellular structures under simulated primitive earth conditions

We have developed experimental approaches for the construction of protocellular structures under simulated primitive earth conditions and studied their formation and characteristics. Three types of envelopes; protein envelopes, lipid envelopes, and lipid-protein envelopes are considered as candidates for protocellular structures. Simple protein envelopes and lipid envelopes are presumed to have originated at an early stage of chemical evolution, interaction mutually and then evolved into more complex envelopes composed of both lipids and proteins.Three kinds of protein envelopes were constructedin situ from amino acids under simulated primitive earth conditions such as a fresh water tide pool, a warm sea, and a submarine hydrothermal vent. One protein envelope was formed from a mixture of amino acid amides at 80 °C using multiple hydration-dehydration cycles. Marigranules, protein envelope structures, were produced from mixtures of glycine and acidic, basic and aromatic amino acids at 105 °C in a modified sea medium enriched with essential transition elements. Thermostable microspheres were also formed from a mixture of glycine, alanine, valine, and aspartic acid at 250 °C and above. The microspheres did not form at lower temperatures and consist of silicates and peptide-like polymers containing imide bonds and amino acid residues enriched in valine. Amphiphilic proteins with molecular weights of 2000 were necessary for the formation of the protein envelopes.Stable lipid envelopes were formed from different dialkyl phospholipids and fatty acids.Large, stable, lipid-protein envelopes were formed from egg lecithin and the solubilized marigranules. Polycations such as polylysine and polyhistidine, or basic proteins such as lysozyme and cytochromec also stabilized lipid-protein envelopes.     

In vivo biotinylation of fusion proteins expressed in Escherichia coli with a sequence of Propionibacterium freudenreichii transcarboxylase 1.3S biotin subunit.

Biotinylation of fusion proteins in E. coli was studied using a sequence of Propionibacterium freudenreichii transcarboxylase 1.3S biotin subunit. As the biotinylation sequence, we examined two sequences: one was of amino acid residues [84-123] of 1.3S, a partial sequence containing a region from a conserved tetrapeptide (Ala-Met-Bct-Met) around the biotinyl lysine (Bct) to the carboxyl terminal; the other was of an almost entire sequence [18-123]. We constructed recombinant plasmids for fusion proteins of beta-galactosidase, of chloramphenicol acetyltransferase, and of alkaline phosphatase. We found the biotinylation in the [18-123] sequence fused to alkaline phosphatase.     

Primer RNA for DNA synthesis on single-stranded DNA template in a cell free system from Drosophila melanogaster embryos

A cytoplasmic extract of Drosophila melanogaster early embryos supported DNA synthesis which was dependent on an added single stranded DNA template, phi X174 viral DNA. The product DNA made during early reaction was about 100 to 600 nucleotides in length and complementary to the added template. After alkali treatment, 70 to 80 per cent of the product DNA chains exposed 5'-hydroxyl ends, suggesting covalent linkage of primer RNA at their 5'-ends. Post-labeling of 5'-ends of the product DNA with polynucleotide kinase and [gamma-32P]ATP revealed that oligoribonucleotides, mainly hexa- and heptanucleotides, were covalently linked to the 5'-ends of the majority of the DNA chains. The nucleotide sequence of the linked RNA was mainly 5'(p)ppApA(prN)4-5, where tri- (or di-) phosphate terminus was detected by the acceptor activity for the cap structure with guanylyltransferase and [alpha-32P]GTP. The structure of this primer RNA was comparable to that of the octaribonucleotide primer isolated from the nuclei of Drosophila early embryos.     

Climate and vegetation in China II. Distribution of main vegetation types and thermal climate

The authors examined relationships between Kira's warmth index (WI) and four other important thermal indices: the sums of daily mean temperatures above 5°C and 10°C, Thornthwaite's potential evapotranspiration (PE) and Holdridge's annual biotemperature. The thermal records of 671 meteorological stations evenly located all over China were used to make these comparisons. Close correlations were found within the four relationships, and accordingly WI was used to analyse the thermal distributions of the main vegetation types. Vegetation types around the 671 stations were read from a vegetation map with a scale of 1/4000000. Vegetation types at 269 stations corresponded to the natural or seminatural vegetation, and 29 vegetation types were distinguished by arranging the 269 data into the same or similar types. The geographical distribution of these 29 types and the corresponding main climatic features were described. The relations between WI and distribution of these vegetation types were discussed in detail. As a result, WI values (°C month) corresponding to the vegetation zones could be summarized as follows: (1) arctic or alpine vegetation zone: 0–15; (2) boreal or subalpine vegetation zone: 15-(50–55); (3) cool-temperate vegetation zone: (50–55)–(80–90); (4) warm-temperate vegetation zone: (80–90)–(170–180). These values almost coincided with Kira's values. Chinese postgraduate student in Japan sent by the Chinese Government.     

Carbon-cycling changes during regeneration of a decinduous broadleaf forest after clear-cutting II. Aboveground net production

Growth and death rates of aboveground plant parts were measured in a mature forest and four different-aged deciduous broadleaf forests regeneratede after clear-cutting, with special reference to rates for woody parts (stems and branches) of different diameters (ø) in rerms of the pipe model theory (Shinozaki et al., 1964). The total biomass increment of woody parts of trees higher than 1.3 m varied within a range of 2.1-4.6 ton ha^?1 yr^?1, the increase beingdue largely to the growth of canopy trees exposed to direct sunlight. Biomass increments of small (ø<1 cm) and medium (1≤ø<5 cm) woody parts were negligibly small except in the youngest forest, and changes in aboveground woody biomass with forest age after clear-cutting mainly resulted from accumulation of large (5 cm<ø) woody parts of canopy trees. Biomass loss of trees due to death and grazing increased with forest age from 4.0 to 8.3 ton ha^?1 yr^?1. Recovery of leaf and small wood falls was observed at the early stage of regeneration, while large wood falls increased during regeneration. Flower and fruit fall was markedly higher in the mature forest than in the other four forest types. Mortality of woody parts became higher with forest age and was 20, 5.0 and 0.46% yr^?1 for small, medium and large parts, respectively, at the mature stage. Aboveground net production of the forest was in therange 7.6-13.3 ton ha^?1 yr^?1 with the undergrowth vegetation lower than 1.3 m being 0.4-1.4 ton ha^?1 yr^?1. Production recovered rapidly at an early stage of regeneration and was highest in mature forest.     

Synthesis of polypeptides by microwave heating I. Formation of polypeptides during repeated hydration-dehydration cycles and their characterization

Summary Amino acid amides effectively reacted to produce polypeptides in response to microwave heating during repeated hydration-dehydration cycles. The polypeptides, formed from a mixture of glycinamide, alaninamide, valinamide, and aspartic acid -amide, had molecular weights ranging from 1000 to 4000 daltons. Amino acids were incorporated into the polypeptides in proportion to the starting concentrations, with the exception of glycine whose incorporation was 1.5 times higher than that of the other amino acids. The polypeptides had some definite secondary structure, such as -helix and -sheet, in aqueous solution. This reaction provides not only a convenient method for abiotic peptide formation but also a convenient method for the chemical synthesis of peptides.     

A 1H-NMR study of the solution conformation of cyclo(GRGDSPA): conformational effects on the physiological activity.

Solution conformations of cyclo(GRGDSPA) have been analyzed by the use of two-dimensional proton nuclear magnetic resonance spectroscopy and the dynamical simulated annealing calculation. It has been shown that the RGDS segment in cyclo(GRGDSPA) takes a beta-turn conformation. We have concluded that this beta-turn conformation is essential for the physiological activity of cyclo(GRGDSPA).