Phylogeny of Greya (Lepidoptera: Prodoxidae), based on nucleotide sequence variation in mitochondrial cytochrome oxidase I and II: congruence with morphological data

The phylogeny of Greya Busck (Lepidoptera: Prodoxidae) was inferred from nucleotide sequence variation across a 765-bp region in the cytochrome oxidase I and II genes of the mitochondrial genome. Most parsimonious relationships of 25 haplotypes from 16 Greya species and two outgroup genera (Tetragma and Prodoxus) showed substantial congruence with the species relationships indicated by morphological variation. Differences between mitochondrial and morphological trees were found primarily in the positions of two species, G. variabilis and G. pectinifera, and in the branching order of the three major species groups in the genus. Conflicts between the data sets were examined by comparing levels of homoplasy in characters supporting alternative hypotheses. The phylogeny of Greya species suggests that host-plant association at the family level and larval feeding mode are conservative characters. Transition/transversion ratios estimated by reconstruction of nucleotide substitutions on the phylogeny had a range of 2.0-9.3, when different subsets of the phylogeny were used. The decline of this ratio with the increase in maximum sequence divergence among taxa indicates that transitions are masked by transversions along deeper internodes or long branches of the phylogeny. Among transitions, substitutions of A-->G and T-->C outnumbered their reciprocal substitutions by 2-6 times, presumably because of the approximately 4:1 (77%) A+T-bias in nucleotide base composition. Of all transversions, 73%-80% were A<-->T substitutions, 85% of which occurred at third positions of codons; these estimates did not decrease with an increase in maximum sequence divergence of taxa included in the analysis. The high frequency of A<-->T substitutions is either a reflection or an explanation of the 92% A+T bias at third codon positions.      

Proposal for adoption of the base of the Undulograptus austrodentatus Biozone as a global Ordovician stage and series boundary level

The base of the Undulograptus austrodentatus Biozone appears to be a synchronous event that is widely recognizable within graptolitic facies around the world. It occurs within an interval in which graptolite species ranges are now well known and in which there is a rapid turnover in the composition of graptolite faunas. This turnover reflects the rapid evolutionary radiation of the Diplograptacea simultaneously with the appearance of several distinctive pseudisograptid and glossograptid species. These events provide the basis for the recognition of two thin but widely applicable subzones; a lower Arienigraptus zhejiangensis Subzone and an upper U. sinicus Subzone. The occurrence of the lower boundary of the U. austrodentatus Biozone within a succession of first appearances also permits accurate and reliable identification of the boundary as well as assessment of stratigraphic completeness across the boundary interval in correlated sections. Diverse graptolite faunas of late Yapeenian and early Darriwilian age occur in association with the Histiodella altifrons Biozone of the North American midcontinent conodont zonation and the Paroistodus originalis and Microzarkodina parva biozones of the North Atlantic conodont zonation. They also occur in association with the shelly-fossil zonations developed for several different continents. These features of the base of the U. austrodentatus Biozone make it a suitable level for use as the boundary level for a global stage. Its stratigraphic position within the Ordovician System relative to other likely global stages as well as its coincidence with one of the major events in graptolite evolutionary history suggest that this level also may be a suitable level for the base of a global Middle Ordovician Series.Ordovician System, Ordovician stages, graptolite zonation, chronostratigraphy, international correlation. Charles E. Mitchell and Jörg Maletz, Department of Geology, State University of New York at Buffalo, Buffalo, New York 14260-1550, USA; 13th July, 1994; revised 22nd May, 1995.     

Heterogeneity of Intermediate Filament Expression in Vascular Smooth Muscle: A Gradient in Desmin Positive Cells from the Rat Aortic Arch to the Level of the Arteria Iliaca Communis

The display of the two distinct intermediate filament proteins, desmin and vimentin, in rat vascular smooth muscle tissue was studied by immunofluorescence microscopy on frozen sections of aorta and other blood vessels. Vascular smooth muscle cells present in these vessels always appeared rich in vimentin. However, staining of sections covering six distinct but contiguous parts of the aorta showed that the number of desmin containing cells was low distal to the truncus brachiocephalicus, but increases until in distal parts of the aorta and in the arteria iliaca communis almost all cells appear positive for desmin. Thus blood vessels show heterogeneity of intermediate filament expression not only in cross-section but can also display heterogeneity along their length. Muscular arteries such as the renal artery and the arteria femoralis, as well as arterioles and veins including the vena jugularis and the vena cava also contain desmin. Thus it may be that low numbers of desmin-positive cells are typical of elastic arteries, while muscular arteries and other blood vessels are characterized by large numbers of desmin-positive cells. We discuss whether desmin-positive and desmin-negative vascular smooth muscle cells may perform different functions and raise the possibility that desmin expression may coincide with the turn on of a specially regulated contractility program.     

Unifying Charge Generation,Recombination, and Extraction in Low‐Offset Non‐Fullerene Acceptor Organic Solar Cells

Even though significant breakthroughs with over 18% power conversion efficiencies (PCEs) in polymer:non‐fullerene acceptor (NFA) bulk heterojunction organic solar cells (OSCs) have been achieved, not many studies have focused on acquiring a comprehensive understanding of the underlying mechanisms governing these systems. This is because it can be challenging to delineate device photophysics in polymer:NFA blends comprehensively, and even more complicated to trace the origins of the differences in device photophysics to the subtle differences in energetics and morphology. Here, a systematic study of a series of polymer:NFA blends is conducted to unify and correlate the cumulative effects of i) voltage losses, ii) charge generation efficiencies, iii) non‐geminate recombination and extraction dynamics, and iv) nuanced morphological differences with device performances. Most importantly, a deconvolution of the major loss processes in polymer:NFA blends and their connections to the complex BHJ morphology and energetics are established. An extension to advanced morphological techniques, such as solid‐state NMR (for atomic level insights on the local ordering and donor:acceptor π? π interactions) and resonant soft X‐ray scattering (for donor and acceptor interfacial area and domain spacings), provide detailed insights on how efficient charge generation, transport, and extraction processes can outweigh increased voltage losses to yield high PCEs.     

Identification of Avramr1 from Phytophthora infestans using long read and cDNA pathogen-enrichment sequencing (PenSeq)

Potato late blight, caused by the oomycete pathogen Phytophthora infestans, significantly hampers potato production. Recently, a new Resistance to Phytophthora infestans (Rpi) gene, Rpi-amr1, was cloned from a wild Solanum species, Solanum americanum. Identification of the corresponding recognized effector (Avirulence or Avr) genes from P. infestans is key to elucidating their naturally occurring sequence variation, which in turn informs the potential durability of the cognate late blight resistance. To identify the P. infestans effector recognized by Rpi-amr1, we screened available RXLR effector libraries and used long read and cDNA pathogen-enrichment sequencing (PenSeq) on four P. infestans isolates to explore the untested effectors. Using single-molecule real-time sequencing (SMRT) and cDNA PenSeq, we identified 47 highly expressed effectors from P. infestans, including PITG_07569, which triggers a highly specific cell death response when transiently coexpressed with Rpi-amr1 in Nicotiana benthamiana, suggesting that PITG_07569 is Avramr1. Here we demonstrate that long read and cDNA PenSeq enables the identification of full-length RXLR effector families and their expression profile. This study has revealed key insights into the evolution and polymorphism of a complex RXLR effector family that is associated with the recognition by Rpi-amr1.     

New Natural Noncannabinoid Ligands for Cannabinoid Type-2 (CB2) Receptors

Since the discovery that Δ ⁹-tetrahydrocannabinol and related cannabinoids from Cannabis sativa L. act on specific physiological receptors in the human body and the subsequent elucidation of the mammalian endogenous cannabinoid system, no other natural product class has been reported to mimic the effects of cannabinoids. We recently found that N-alkyl amides from purple coneflower (Echinacea spp.) constitute a new class of cannabinomimetics, which specifically engage and activate the cannabinoid type-2 (CB₂) receptors. Cannabinoid type-1 (CB₁) and CB₂ receptors belong to the family of G protein-coupled receptors and are the primary targets of the endogenous cannabinoids N-arachidonoyl ethanolamine and 2-arachidonoyl glyerol. CB₂ receptors are believed to play an important role in distinct pathophysiological processes, including metabolic dysregulation, inflammation, pain, and bone loss. CB₂ receptors have, therefore, become of interest as new targets in drug discovery. This review focuses on N-alkyl amide secondary metabolites from plants and underscores that this group of compounds may provide novel lead structures for the development of CB₂-directed drugs.     

Biomass Yield and Greenhouse Gas Emissions from a Drained Fen Peatland Cultivated with Reed Canary Grass under Different Harvest and Fertilizer Regimes

Reed canary grass (RCG, Phalaris arundinacea L.) is a suitable energy crop for cultivation in northern peatlands. However, the atmospheric impact of RCG cultivation as influenced by harvest frequency and fertilization is not clear. Here, we compared the biomass yield and greenhouse gas (GHG) balance for RCG cultivation in peatlands affected by cutting frequency and fertilizer managements. The managements included one-cut (OC) and two-cut (TC) systems that were either fertilized (TC-F) or unfertilized (TC-U) after the first cut in summer. Biomass yield of OC, TC-F and TC-U were 12, 16 and 11 Mg dry biomass per hectare per year, respectively. GHG fluxes of CO₂, N₂O and CH₄ were measured with closed chamber techniques in the period between first and second (final) harvest of the TC managements, i.e. from 15 June to 23 September 2011. In the GHG monitoring period of 100 days, all systems were net sources of CO₂ corresponding to 64?±?3, 217?±?15 and 50?±?23 g?CO₂-C?m^?2 (mean?±?standard error, n?=?3) from the OC, TC-F and TC-U systems, respectively. In the same period, emissions of N₂O from TC-F were ten times higher as compared to OC and TC-U. Emissions of CH₄ were negligible from all systems. The TC systems could not improve the GHG balance during cultivation (271, 663 and 210 g CO₂e-C?m^?2 emissions from the OC, TC-F and TC-U systems, respectively), but in a broader GHG life cycle perspective, the increased biomass yield by TC-F could replace more fossil fuel and offset at least some of the higher emissions from the system.