Chromosome transfer and R-prime formation by an RP4::mini-Mu derivative in Escherichia coli, Salmonella typhimurium, Klebsiella pneumoniae, and Proteus mirabilis

We have introduced into the wide host range conjugative plasmid RP4, a mini-Mu derivative which was known to be able to transpose spontaneously in E. coli K-12, and to induce in such a host several kinds of chromosomal rearrangements including replicon fusions. Unlike RP4, RP4::mini-Mu can mediate the transfer of the host chromosome to a recipient bacterium and generate R primes at high frequencies (10^?4 for the transfer of a given marker, 10^?5 for the formation of R primes carrying a given marker). Two such RP4::mini-Mu plasmids were introduced into one Salmonella typhimurium strain, one Klebsiella pneumoniae strain, and one Proteus mirabilis strain. Each of these three strains were mated with an E. coli K-12 recipient and transconjugants carrying R primes were recovered in all three cases at frequencies ranging from 5 × 10^?6 to 10^?7.     

Bacteriocin-resistant mutants of Erwinia chrysanthemi: possible involvement of iron acquisition in phytopathogenicity.

A series of bacteriocin-resistant mutants of Erwinia chrysanthemi 3937JRH were unable to elicit soft-rot symptoms on saintpaulia plants. The loss of pathogenicity was correlated with the disappearance of one to three outer membrane polypeptides (molecular weights, about 80,000 to 90,000) whose production in wild-type strains was greatly enhanced under iron-limited growth conditions. The mutants did not exhibit altered extracellular pectinolytic or cellulolytic activities.     

Genetic mapping of a mutation conferring sensitivity to bacteriophage Mu in Salmonella typhimurium LT2.

Two strains of Salmonella typhimurium LT2, SA1475 and MA411, were fortuitously found to be sensitive to bacteriophage Mu. The Mu-sensitivity allele of SA1475 was called musA1 and shown to be linked to the histidine operon both in conjugation and transduction experiments. The Mus allele of MA411 was unlinked to the his region and was tentatively designated musB2. Strains carrying large deletions of the his operon were also tested for Mu sensitivity; those of which the his-rib region is deleted were also sensitive to Mu. Transduction data led to the order zee-2 hisOGDCBAHFIE gnd musA. An Hfr injecting the his operon early (HfrK9) an carrying hisG9424::Tn10 delta 4 delta 11 and musA1 was isolated; this Hfr made it possible to introduce the Mus character into most derivatives of S. typhimurium LT2. Since strain SA1475 is resistant to bacteriophage P1, it could be used to select a new P1-Mu hybrid which has the host range of Mu and the transduction properties of P1.     

Instability of bacteriophage Mu transposase and the role of host Hfl protein

The activity of the transposase of bacteriophage Mu is unstable, requiring the protein to be synthesized throughout the lytic cycle (Pato and Reich, 1982). Using Western blot analysis, we analysed the stability of the transposase protein during the lytic cycle and found that it, too, is unstable. The instability of the protein is observed both in the presence and the absence of Mu DNA replication, and is independent of other Mu-encoded proteins and the transposase binding sites at the Mu genome ends. Stability of the protein is enhanced in host strains mutated at the hfl locus; however, stability of the transposase activity is not enhanced in these strains, suggesting that functional inactivation of the protein is not simply a result of its proteolysis.     

Effects on efficiency in repetitive lifting of load and frequency combinations at a constant total power output.

Boxes were lifted and lowered repetitively at three different combinations of load and frequency. These combinations were chosen such that the total mechanical power generated was constant. Effects of the varying load or frequency conditions (but constant total mechanical power) on the rate of energy expenditure (M) and on the mechanical efficiency (ME) were measured. Mechanical power was determined from film analysis and separated into external power (generated to lift the load) and internal power (to raise the lifter's body mass). The M was determined from oxygen consumption measurements. The ME was calculated in two ways, depending on the definition of mechanical power, including either the external power only (MEext) or the total power output (MEtot). Despite a constant total mechanical power, M increased at higher loads and lower frequencies. This might be explained by the increasing isometric force required in postural and load control. The M increase resulted in a decrease of MEtot. However, at higher loads and lower frequencies MEext increased, indicating that more external work can be done at the same energy costs at higher loads or lower frequencies, which could be of interest from the point of view of occupational physiology. It would seem that at higher loads or lower frequencies the increased costs for isometric muscle action do not outweigh the benefit of raising the body less frequently. Furthermore, it was found that the MEext in lifting was much lower than the values reported for other kinds of activity.(ABSTRACT TRUNCATED AT 250 WORDS)     

An estimation of drag in front crawl swimming

Propulsive arm forces of twelve elite male swimmers during a front crawl swimming-like activity were measured. The swimmers pushed off against grips which are attached to a 23 m tube at 0.8 m under the water surface. The tube was fixed to a force transducer. Since at constant speed, mean propulsive force equals mean drag force this method also provides the mean active drag on a moving swimmer. The mean propulsive force at a speed of v = 1.48 m s-1 appeared to be 53.2 +/- 5.8 N which is two to three times smaller than what is reported by other authors for active drag but which is in agreement with values reported for passive drag on a (towed) swimmer who is not moving. Discrepancies with indirect active drag measurements are discussed.     

Propelling efficiency of front-crawl swimming

In this study the propelling efficiency (ep) of front-crawl swimming, by use of the arms only, was calculated in four subjects. This is the ratio of the power used to overcome drag (Pd) to the total mechanical power (Po) produced including power wasted in changing the kinetic energy of masses of water (Pk). By the use of an extended version of the system to measure active drag (MAD system), Pd was measured directly. Simultaneous measurement of O2 uptake (VO2) enabled the establishment of the relationship between the rate of the energy expenditure (PVO2) and Po (since when swimming on the MAD system Po = Pd). These individual relationships describing the mechanical efficiency (8-12%) were then used to estimate Po in free swimming from measurements of VO2. Because Pd was directly measured at each velocity studied by use of the MAD system, ep could be calculated according to the equation ep = Pd/(Pd + Pk) = Pd/Po. For the four top class swimmers studied, ep was found to range from 46 to 77%. Total efficiency, defined as the product of mechanical and propelling efficiency, ranged from 5 to 8%.     

The rabbit alpha-like globin gene cluster is polymorphic both in the sizes of BamHI fragments and in the numbers of duplicated sets of genes

The alpha-like globin gene cluster in rabbits contains embryonic zeta- globin genes, an adult alpha-globin gene, and theta-globin genes of undetermined function. The basic arrangement of genes, deduced from analysis of cloned DNA fragments, is 5'-zeta 0-zeta 1-alpha 1-theta 1- zeta 2-zeta 3-theta 2-3'. However, the pattern of restriction fragments containing zeta- and theta-globin genes varies among individual rabbits. Analysis of BamHI fragments of genomic DNA from 24 New Zealand white rabbits revealed eight different patterns of fragments containing zeta-globin genes. The large BamHI fragments containing genes zeta 0 and zeta 1 are polymorphic in length, whereas a 1.9-kb fragment containing the zeta 2 gene and the 3.5-kb fragment containing the zeta 3 gene do not vary in size. In contrast to this constancy in the size of the restriction fragments, the copy number of the zeta 2 and zeta 3 genes does vary among different rabbits. No length polymorphism was detected in the BamHI fragments containing the theta-globin genes, but again the copy number varies for restriction fragments containing the theta 2 gene. The alpha 1- and theta 1-globin genes are located in a nonpolymorphic 7.2-kb BamHI fragment. The combined data from hybridization with both zeta and theta probes shows that the BamHI cleavage pattern does not vary within the region 5'-alpha 1-theta 1- zeta 2-zeta 3-theta 2-3', but the pattern genomic blot-hybridization patterns for the progeny of parental rabbits with different zeta-globin gene patterns shows that the polymorphic patterns are inherited in a Mendelian fashion. Two different haplotypes have been mapped based on the genomic blot-hybridization data. The variation in the alpha-like globin gene cluster in the rabbit population results both from differences in the copy number of the duplication block containing the zeta-zeta-theta gene set and from the presence or absence of polymorphic BamHI sites.      

Trimethyloxonium modification of single batrachotoxin-activated sodium channels in planar bilayers. Changes in unit conductance and in block by saxitoxin and calcium

Single batrachotoxin-activated sodium channels from rat brain were modified by trimethyloxonium (TMO) after incorporation in planar lipid bilayers. TMO modification eliminated saxitoxin (STX) sensitivity, reduced the single channel conductance by 37%, and reduced calcium block of inward sodium currents. These effects always occurred concomitantly, in an all-or-none fashion. Calcium and STX protected sodium channels from TMO modification with potencies similar to their affinities for block. Calcium inhibited STX binding to rat brain membrane vesicles and relieved toxin block of channels in bilayers, apparently by competing with STX for the toxin binding site. These results suggest that toxins, permeant cations, and blocking cations can interact with a common site on the sodium channel near the extracellular surface. It is likely that permeant cations transiently bind to this superficial site, as the first of several steps in passing inward through the channel.