An implantable transducer for measuring tension in an anterior cruciate ligament graft.

The goal of this study was to develop a new implantable transducer for measuring anterior cruciate ligament (ACL) graft tension postoperatively in patients who have undergone ACL reconstructive surgery. A unique approach was taken of integrating the transducer into a femoral fixation device. To devise a practical in vivo calibration protocol for the fixation device transducer (FDT), several hypotheses were investigated: (1) The use of a cable versus the actual graft as the means for applying load to the FDT during calibration has no significant effect on the accuracy of the FDT tension measurements; (2) the number of flexion angles at which the device is calibrated has no significant effect on the accuracy of the FDT measurements; (3) the friction between the graft and femoral tunnel has no significant effect on measurement accuracy. To provide data for testing these hypotheses, the FDT was first calibrated with both a cable and a graft over the full range of flexion. Then graft tension was measured simultaneously with both the FDT on the femoral side and load cells, which were connected to the graft on the tibial side, as five cadaver knees were loaded externally. Measurements were made with both standard and overdrilled tunnels. The error in the FDT tension measurements was the difference between the graft tension measured by the FDT and the load cells. Results of the statistical analyses showed that neither the means of applying the calibration load, the number of flexion angles used for calibration, nor the tunnel size had a significant effect on the accuracy of the FDT. Thus a cable may be used instead of the graft to transmit loads to the FDT during calibration, thus simplifying the procedure. Accurate calibration requires data from just three flexion angles of 0, 45, and 90 deg and a curve fit to obtain a calibration curve over a continuous range of flexion within the limits of this angle group. Since friction did not adversely affect the measurement accuracy of the FDT, the femoral tunnel can be drilled to match the diameter of the graft and does not need to be overdrilled. Following these procedures, the error in measuring graft tension with the FDT averages less than 10 percent relative to a full-scale load of 257 N.     

Messy eaters: Swabbing prey DNA from the exterior of inconspicuous predators when foraging cannot be observed

Complex coevolutionary relationships among competitors, predators, and prey have shaped taxa diversity, life history strategies, and even the avian migratory patterns we see today. Consequently, accurate documentation of prey selection is often critical for understanding these ecological and evolutionary processes. Conventional diet study methods lack the ability to document the diet of inconspicuous or difficult‐to‐study predators, such as those with large home ranges and those that move vast distances over short amounts of time, leaving gaps in our knowledge of trophic interactions in many systems. Migratory raptors represent one such group of predators where detailed diet studies have been logistically challenging. To address knowledge gaps in the foraging ecology of migrant raptors and provide a broadly applicable tool for the study of enigmatic predators, we developed a minimally invasive method to collect dietary information by swabbing beaks and talons of raptors to collect trace prey DNA. Using previously published COI primers, we were able to isolate and reference gene sequences in an open‐access barcode database to identify prey to species. This method creates a novel avenue to use trace molecular evidence to study prey selection of migrating raptors and will ultimately lead to a better understanding of raptor migration ecology. In addition, this technique has broad applicability and can be used with any wildlife species where even trace amounts of prey debris remain on the exterior of the predator after feeding.     

Bivariate optimization of pedalling rate and crank arm length in cycling

The contribution of this paper is a bivariate optimization of cycling performance. Relying on a biomechanical model of the lower limb, a cost function derived from the joint moments developed during cycling is computed. At constant average power, both pedalling rate (i.e. rpm) and crank arm length are systematically varied to explore the relation between these variables and the cost function. A crank arm length of 170 mm and pedalling rate of 100 rpm correspond closely to the cost function minimum. In cycling situations where the rpm deviates from 100 rpm, however, crank arms of length other than 170 mm yield minimum cost function values. In addition, the sensitivity of optimization results to both increased power and anthropometric parameter variations is examined. At increased power, the cost function minimum is more strongly related to the pedalling rate, with higher pedalling rates corresponding to the minimum. Anthropometric parameter variations influence the results significantly. In general it is found that the cost function minimum for tall people occurs at longer crank arm lengths and lower pedalling rates than the length and rate for short people.     

Molecular cloning and characterization of the mouse UDP-N-acetylglucosamine:alpha-3-D-mannoside beta-1,2-N-acetylglucosaminyltransferase I gene.

The biosynthesis of protein-bound complex N-glycans in mammals requires a series of covalent modifications governed by a large number of specific glycosyltransferases and glycosidases. The addition of oligosaccharide to an asparagine residue on a nascent polypeptide chain begins in the endoplasmic reticulum. Oligosaccharide processing continues in the Golgi apparatus to produce a diversity of glycan structures. UDP-N-acetylglucosamine:alpha-3-D-mannoside beta-1,2-N-acetylglucosaminyltransferase I (EC 2.4.1.101; GlcNAc-TI) is a key enzyme in the process because it is essential for the conversion of high-mannose N-glycans to complex and hybrid N-glycans. We have isolated the mouse gene encoding GlcNAc-TI (Mgat-1) from a genomic DNA library. The mouse sequence is highly conserved with respect to the human and rabbit homologs and exists as a single protein-encoding exon. Mgat-1 was mapped to mouse Chromosome 11, closely linked to the gene encoding interleukin-3 by the analysis of multilocus interspecies backcrosses. RNA analyses of Mgat-1 expression levels revealed significant variation among normal tissues and cells.     

Molecular cloning and characterization of the mouse UDP-N-acetylglucosamine:α-3- -mannoside β-1,2-N-acetylglucosaminyltransferase I gene

The biosynthesis of protein-bound complex N-glycans in mammals requires a series of covalent modifications governed by a large number of specific glycosyltransferases and glycosidases. The addition of oligosaccharide to an asparagine residue on a nascent polypeptide chain begins in the endoplasmic reticulum. Oligosaccharide processing continues in the Golgi apparatus to produce a diversity of glycan structures. UDP-N-acetylglucosamine:α-3- -mannoside β-1,2-N-acetylglucosaminyltransferase I (EC 2.4.1.101; GlcNAc-TI) is a key enzyme in the process because it is essential for the conversion of high-mannose N-glycans to complex and hybrid N-glycans. We have isolated the mouse gene encoding GlcNAc-TI (Mgat-1) from a genomic DNA library. The mouse sequence is highly conserved with respect to the human and rabbit homologs and exists as a single protein-encoding exon. Mgat-1 was mapped to mouse Chromosome 11, closely linked to the gene encoding interleukin-3 by the analysis of multilocus interspecies backcrosses. RNA analyses of Mgat-1 expression levels revealed significant variation among normal tissues and cells.     

Expectations of assisted conception for infertility.

OBJECTIVE--To provide reliable prognostic information for couples seeking assisted conception. DESIGN--Analysis of four years'' practice (1988-91). SETTING--Private university service linked with NHS reproductive medicine services. PATIENTS--804 couples with various causes of subfertility, median duration five years, median age of women 34 years. INTERVENTIONS--1280 completed cycles: 950 in vitro fertilisation, 144 gamete intrafallopian transfer, and 186 intrauterine insemination and superovulation. MAIN OUTCOME MEASURES--Pregnancy and birth rates per cycle and cumulative pregnancy and take home baby rates per couple. RESULTS--In women under 40 years and men with normal sperm, whatever the cause of infertility, results with in vitro fertilisation improved steadily reaching a pregnancy rate per cycle of 30% (95% confidence interval 26% to 35%) during 1990-1 and birth rate per cycle of 29% (23% to 35%) in 1990. Pregnancy and birth rates for gamete intrafallopian transfer were 36% (28% to 44%) and 26% (17% to 37%) and for intrauterine insemination 18% (12% to 24%) and 16% (10% to 22%). After six cycles cumulative probability of pregnancy was 82% and cumulative take home baby rate 70%. Considering only in vitro fertilisation and gamete intrafallopian transfer after four cycles the pregnancy rate was 78% (66% to 91%). CONCLUSIONS--Conception is less likely in women over 40 and men with sperm dysfunction. For other couples the prognosis for a live birth is at least as good as for fertile couples if they persist with treatment.     

The error in the cryptic stereospecificity of methylmalonyl-CoA mutase. The use of carba-(dethia)-coenzyme A substrate analogues gives new insight into the enzyme mechanism

A preparation containing 80.0 +/- 0.5% (2RS)-methylmalonyl-carba-(dethia)-CoA and 20.0 +/- 0.5% propionyl-carba-(dethia)-CoA was reacted in buffered deuterium oxide with catalytic amounts of coenzyme B12, methylmalonyl-CoA mutase and methylmalonyl-CoA epimerase. The rearrangement of the methylmalonyl-carba-(dethia)-CoA to succinyl-carba-(dethia)-CoA was monitored by recording 500-MHz 1H-NMR spectra in short time intervals. After reaching equilibrium (approximately equal to 28 min) the products showed chemical stability for about 17 h, i.e. succinyl species did not undergo the spontaneous hydrolysis encountered with normal succinyl-CoA. In the pre-equilibrium stage only about 66% of the produced succinyl-CH2CoA was the expected monodeuterated species. The remainder was 15.5% unlabelled and 18.3% 3,3-dideuterated. After reaching equilibrium a continuous deuterium incorporation (washing-in) from the solvent to the products was observed and quantified. The time course of the appearance of unlabelled, mono-, di- and trideuterated succinyl-CH2CoA species was determined by assigning and integrating the isotope-shifted 1H signals from the various species. Furthermore, mutase catalyses slow deuterium incorporation into first the methylene and then the methyl group of propionyl-CH2CoA. On the basis of these data it was concluded that methylmalonyl-CoA mutase and epimerase are responsible for continuous deuterium incorporation and multiple incorporation occurs when the backward reaction (succinyl-CH2CoA----methylmalonyl-CH2CoA) becomes important. To account for all of the results obtained with dethia and natural substrates we propose a new mutase mechanism whereby the enzyme can retain full stereospecificity at C-3 of succinyl while an internal 1,2-H shift to give a C-2 succinyl radical is responsible for partial scrambling of diastereotopic protons at C-3. This mechanism successfully predicts the observed deuterium disproportionation in succinyl species and the order of appearance of di- and trideuterated products via the washing-in process.     

Analysis of EMG measurements during bicycle pedalling

Activity of eight leg muscles has been monitored for six test subjects while pedalling a bicycle on rollers in the laboratory. Each electromyogram (EMG) data channel was digitized at a sampling rate of 2 kHz by a minicomputer. Data analysis entailed generating plots of both EMG activity regions and integrated EMG (IEMG). For each test subject, data were recorded for five cases of pedalling conditions. The different pedalling conditions were defined to explore a variety of research hypotheses. This exploration has led to the following conclusions: Muscular activity levels of the quadriceps are influenced by the type of shoes worn and activity levels increase with soft sole shoes as opposed to cycling shoes with cleats and toeclips. EMG activity patterns are not strongly related to pedalling conditions (i.e. load, seat height and shoe type). The level of muscle activity, however, is significantly affected by pedalling conditions. Muscular activity bears a complex relationship with seat height and quadriceps activity level decreases with greater seat height. Agonist (i.e. hamstrings) and antagonist (i.e. quadriceps) muscles of the hip/knee are active simultaneously during leg extension. Regions of peak activity levels, however, do not overlap. The lack of significant cocontraction of agonist/antagonist muscles enables muscle forces during pedalling action to be computed by solving a series of equilibrium problems over different regions of the crank cycle. Regions are defined and a solution procedure is outlined.