Novel Approach to Simulate Sleep Apnea Patients for Evaluating Positive Pressure Therapy Devices

Bench testing is a useful method to characterize the response of different automatic positive airway pressure (APAP) devices under well-controlled conditions. However, previous models did not consider the diversity of obstructive sleep apnea (OSA) patients’ characteristics and phenotypes. The objective of this proof-of-concept study was to design a new bench test for realistically simulating an OSA patient’s night, and to implement a one-night example of a typical female phenotype for comparing responses to several currently-available APAP devices. We developed a novel approach aimed at replicating a typical night of sleep which includes different disturbed breathing events, disease severities, sleep/wake phases, body postures and respiratory artefacts. The simulated female OSA patient example that we implemented included periods of wake, light sleep and deep sleep with positional changes and was connected to ten different APAP devices. Flow and pressure readings were recorded; each device was tested twice. The new approach for simulating female OSA patients effectively combined a wide variety of disturbed breathing patterns to mimic the response of a predefined patient type. There were marked differences in response between devices; only three were able to overcome flow limitation to normalize breathing, and only five devices were associated with a residual apnea-hypopnea index of <5/h. In conclusion, bench tests can be designed to simulate specific patient characteristics, and typical stages of sleep, body position, and wake. Each APAP device behaved differently when exposed to this controlled model of a female OSA patient, and should lead to further understanding of OSA treatment.     

Changes in DTPA-iron and management of iron chlorosis in rice nurseries

Summary On a Typic Ustochrept soil incorporation of 10 tons/ha of a green manure plus submergence for 10 days followed by raising upland nursery checked iron chlorosis. In contrast, presubmergence with and without FYM and iron sulfate or pyrite were a failure. Nor weekly sprays with 3.0% iron sulfate were found very effective. The success of green manure plus submergence was associated with the mobilization of soil iron as a result of intense reduction and its subsequent retention in available form at a sufficient high level during the growth of upland nursery.     

On Comparing Correlated Means in the Presence of Incomplete Data

Two statistics are proposed for testing the hypothesis of equality of the means of a bivariate normal distribution with unknown common variance and correlation coefficient when observations are missing on both variates. One of the statistics reduces to the one proposed by Bhoj (1978, 1984) when the unpaired observations on the variates are equal. The distributions of the statistics are approximated by well known distributions under the null hypothesis. The empirical powers of the tests are computed and compared with those of some known statistics. The comparison supports the use of one of the statistics proposed in this paper.     

Modeling of nitrogen transformations and translocations

Different submodels within complex model packages on N regimes-for plant N-uptake, net N-mineralization, nitrate leaching and microbial N immobilization-are critically reviewed mainly with regard to their prediction ability on the basis of three comparative papers. Only for some of the processes adequate statistical evaluation of the models was possible. Compared to the other statistically evaluable process, nitrate leaching, modeling of plant N-uptake yields the better results. Most models for mineralization use arbitrary approaches rather than empirical ones. Although only approximate estimates of N mineralisation were at hand, the models generally behave expectedly poor. Only one model-DAISY-out of 16 involved in the comparison uses an explicit microbial biomass sub-model including microbial growth, decline and maintenance terms. So DAISY is the only model coupling C and N cycles. But what is true for an individual model describing the C and N transformation of a lab incubation experiment seems to be valid for most of the complex simulation work on the C and N regimes: this model was said to be overparameterized with respect to the available data.     

Plant regeneration via somatic embryogenesis in chickpea (Cicer arietinum L.)

Efficient plant regeneration via somatic embryogenesis has been developed in chickpea cultivar C235. Leaf explants, on MS medium supplemented with 1.25 mg/l 2,4-D and 0.25 mg/l kinetin, yielded somatic embryos with high efficiency during dark incubation. MS medium supplemented with B₅ vitamins, 0.125 mg/l IBA and 2 mg/l BAP was found suitable for embryo maturation. The well formed embryos germinated into plantlets on basal B₅ medium supplemented with 0.25 mg/l BAP. Further development into healthy plantlets was obtained on basal B₅ medium. Hardened plantlets produced normal, fertile plants upon transfer to soil.Abbreviations 2,4-D 2,4-dichlorophenoxyacetic acid - BAP 6-Benzyl-aminopurine - IAA IndoIe-3-acetic acid - IBA Indole-3-butyric acid - NAA 1-Naphthalene acetic acid - Kinetin 6-furfuryl aminopurine - Zeatin 6-(4-hydroxy-3-methylbut-2-enylamino)-purine     

Determination of chemical biodegradation by direct and indirect methods

Summary Degradation of 10 organic chemicals by pre-acclimated microorganisms in BOD dilution water was determined directly by UV spectrophotometry and indirectly by a modified BOD method. Residual chemical concentrations were periodically measured and pseudo-first-order biodegradation rate constants (k ₁) were calculated. Thek ₁ spectrophotometry values ranged from 0.006/h to 0.077/h andk ₁-BOD values from 0.002/h to 0.043/h for 1-methylnaphthalene and indole, respectively. The ratios ofk spectrophotometry to k₁-BOD were between 1.5 for salicylic acid and 3.0 for 1-methylnaphthalene with a mean of 2.7. A significant (=0.001) linear correlation (r ²=0.854,F=46.630) existed between the two sets of rate constants. Results from this study suggest that the modified BOD method may be used to estimate chemical biodegradation rates in synthetic media.     

Rapid Identification of Viable Bacterial Spores Using a Fluorescence Method

A method has been devised to differentiate viable and nonviable bacterial spores. “Germination-like” changes are initiated in spores with performic acid and lysozyme. The germinated spores are stained with aqueous acridine orange, a fluorescent dye. Nonviable spores fluoresce lemon-green and viable spores orange-red. It is proposed that with the use of a membrane filter resistant to performic acid and lysozyme, the method may be used for spore enumeration in foods in about 4 hr compared to conventional plating methods, which usually require up to 72 hr.     

Clara cell 10 kDa protein (CC10): comparison of structure and function to uteroglobin

The cellular localization, functional activities and structures of rat and human Clara cell 10 kDa proteins (CC10) are compared to rabbit uteroglobin. CC10 is present exclusively in the non-ciliated cells of the surface epithelium of the pulmonary airways, whereas uteroglobin is reported to be present in the lung and reproductive organs. There is about 55% identity between the amino acid sequences of rat CC10 and either rabbit uteroglobin or human CC10. The latter two have 61% identity. Using the known structure of uteroglobin as the model, correlations between the structure and function for this group of proteins are made. Substitution of the residues for the rat and human CC10 into the structure of uteroglobin suggests that these proteins may be members of a structurally homologous family. Some of the functional differences may be due to distortion of the hydrophobic pocket in the dimeric protein and a surface hypervariability located on one contiguous helix and beta turn. Rat CC10 and rabbit uteroglobin both, nearly equally, inhibit papain and bind progesterone. Human CC10 does not inhibit papain and has markedly lower progesterone binding (4.6% of rabbit uteroglobin). Antiinflammatory activity of synthetic peptides corresponding to a homologous sequence region of uteroglobin and the two Clara cell proteins was tested. The region chosen has sequence similarity to lipocortin I. The peptides not only failed to inhibit carrageenan-induced foot pad swelling but exacerbated it. All three proteins inhibit pancreatic phospholipase A2. The phospholipase A2 inhibitory effect of CC10 may be important in regulating the inflammatory responses in the lung.     

Xanthone and flavonol constituents of Swertia hookeri

The whole plant of Swertia hookeri, collected at flowering has been shown to contain two tri- and nine tetraoxygenated free, glucosyloxy, and stearyl ester xanthones and one flavonol stearyl ester. Among these, three are previously unreported in nature and one was known previously only as a synthetic compound. The xanthones are based on 1,3,5,-, 1,3,5,8- and 1,3,7,8-oxygenated systems with the middle oxygenation pattern predominating. The two ester compounds appeared only at the flowering stage. Plants collected at the pre-flowering stage gave the corresponding free compounds. The biochemical and biological significance of these findings are appraised.     

Muscle mass in musculoskeletal models

Most current models of musculoskeletal dynamics lump a muscle's mass with its body segment, and then simulate the dynamics of these body segments connected by joints. As shown here, this popular approach leads to errors in the system's inertia matrix and hence in all aspects of the dynamics. Two simplified mathematical models were created to capture the relevant features of monoarticular and biarticular muscles, and the errors were analyzed. The models were also applied to two physiological examples: the triceps surae muscles that plantar flex the human ankle and the biceps femoris posterior muscle of the rat hind limb. The analysis of errors due to lumping showed that these errors can be large. Although the errors can be reduced in some postures, they cannot be easily eliminated in models that use segment lumping. Some options for addressing these errors are discussed.