Monoclonal antibodies to antigens found on the neutrophils, activated T-lymphocytes and blast cells in human acute leukemia

Two hybridomas secreting mouse cytotoxic monoclonal antibodies to in vivo and in vitro activated human T-lymphocyte and neutrophil surface membrane antigenic determinants have been produced. One of these monoclonal antibodies (Ta/H-2) appeared to be also specifically reactive to blast cells in the majority of non-T-non-B and T acute lymphoblastic leukemia patients.     

Characteristic features of the structure of co-integrating plasmids and simple insertions formed during transposition of the IS1 element in transposon Tn9'

Earlier we have studied unstable dissociating IS1/Tn9'-mediated cointegrates between the plasmids pDK57 (pBR322::Tn9') and pRP3.1, a deletion derivative of RP1, and two types of such cointegrates containing three and four copies of IS1 were revealed. In the present paper we studied the structure of stable IS1/Tn9'-mediates cointegrates and simple insertions formed by interaction between the plasmids pDK57 and pRP3.1 in the E. coli recA- cells. It was shown, that the stable cointegrates were formed by insertion of pDK57 in different loci of pRP3.1 and these cointegrates contain three copies of IS1, i.e. one copy of IS1 and a copy of Tn9' at the junction of the two replicons. The cointegrates are formed predominantly due to the activity of the left copy of Tn9', which occupies a proximal position in regard to the promoter of the cat gene. It was found that the integration of pDK57 into the kan gene region of pRP3.1 leading to the formation of the KmS cointegrates occurs only in one of the two possible orientations. Meanwhile the insertions of the transposon Tn9' into the kan region of pRP3.1 leading to simple insertions occurs in the orientation opposite to the orientation of the transposon in the KmS cointegrates. It is proposed that simple insertions are not the products of direct transposition of Tn9', but they are formed from unstable cointegrates under the action of IS1-specific resolvase.     

Structural instability of co-integrates formed during interaction of plasmid R57 with pB322 and RP1. Possible role of IS1 element in the degradation of co-integrates

The conjugative plasmid R57 determines resistance to ampicillin and chloramphenicol. Earlier it was shown that R57 encodes site-specific recA-independent recombinase, which acts in cis and resolves IS1-mediated cointegrates arising in the Escherichia coli recA cells between R57 and pBR322. In the present work the properties of the cointegrates between R57 and pBR322 or RP1 arising in the E. coli rec+ strains were studied. It was found that the cointegrates between R57 and pBR322, obtained by mating of the respective biplasmid donors of E. coli rec+ and the rec+ recipients, lost as a result of deletion a large DNA segment of R57 containing determinant Cmr. The resulting hybrid replicons preserved determinants Apr and Tcr of pBR322 and the R57 conjugative properties and were structurally identical. By using plasmid RP1ts12, which is temperature-sensitive in replication, it was demonstrated that in cells rec+ the cointegrates between R57 and RP1 are extremely unstable. On storage they undergo structural degradation mainly affecting the RP1 replicon. The degradation products of the hydrid complex had lost their RP1 genes but preserved the R57 functional determinants. For elucidation of the observed phenomena the properties of the IS1-mediated cointegrates between pBR322:Tn9 and plasmid pBR3.1--deletion derivative of RP1 were studied. It was found that insertion of IS1 sometimes resulted in formation of unstable cointegrates capable of resolving and loosing determinant Cmr with a high frequency. It was suggested that IS1 encodes the site-specific recombinase responsible for resolution of the IS1-mediated cointegrates and deletion generation. Expression of this recombinase appears to be dependent on structure of the insertion sites. The possible role of IS1 and recombinase encoded by it in resolution and structural instability of the cointegrates between R57 and pBR322 or RP1 is discussed.     

Immunity to repeated transposition of the insertion sequence IS21

The ability of pBR325 derivatives carrying a copy of IS21-element to accept the second copy of this element from plasmid pRP19.6, a temperature-sensitive for replication mutant of RPI containing the duplicated IS21 was studied. It was shown that the frequency of IS21 transposition into plasmids pBR32S::IS21 differing by localization IS21 was lower by two orders of magnitude as compared to that of pBR325. The restriction endonuclease analysis revealed that the insertion of the second copy of IS21 resulted in the formation of pBR325 derivatives carrying the tandem repeated copies of IS21. It was also shown that the plasmids pBR325::IS21 were capable of increasing the frequency of pRP19.6 insertion into the bacterial chromosome from 3-9 to 200-300 times depending on IS21 localization. On the basis of the results obtained and literature data the possible mechanism of the transposition immunity is discussed.     

Interaction (integration and excision) of the pRP19.6 plasmid, a derivative of the RP1 plasmid containing duplicated sequence IS21, with the chromosome of Escherichia coli K12

A pRP19.6 plasmid is the derivative of the temperature sensitive RPlts12 plasmid and contains a duplicated IS21 (IS8) element. Using temperature sensitive pRP19.6 replication, Hfr strains have been obtained by integration of the plasmid into the chromosome of E. coli rec+ and recA- cells and their properties were studied. According to the results obtained, pRP19.6 insertion into the genome of the rec+ bacteria IS reversible, and its integration into the chromosome of the recA- bacteria produced the stable Hfr strains. To elucidate the mechanism of pRP19.6 excision from the bacterial chromosome, plasmids of R+ transconjugates generated with a low frequency in the crosses between the stable Hfr strains and the rec+ recipients were analyzed. It was shown that the stable Hfr clones might produce stable R1 plasmids as well as a family of deletion KmsTra- derivatives of the pRP19.6. The structure of the KmsTra- was investigated and the mechanism of their formation was proposed. In the light of the data obtained, prospects of pRP19.6 practical application are discussed.     

Formation of stable Hfr strains in R factor RP1 integration with the chromosome of E. coli K12 recA and their use for R-plasmid selection

Analysis of thermoindependent derivatives of E. coli K12 JC1553 recA (p VD1) carrying a replication thermostable mutant pVD1 of R factor RP1 IncP Ap Km Tc showed that formation of about 5 per cent of them was associated with stable integration of the plasmid with the bacterial chromosome. The respective bacteria had the following features: (1) preserved all the markers of plasmid pVD1, (2) according to the data of the electrophoretic analysis had no extrachromosomal DNA on prolonged cultivation under nonselective conditions, (3) were effective donors of the chromosomal genes, (4) had a low rate of the plasmid marker transfer on crossing with R- recipient. The latter feature was suggested to be used as a test for identification of stable Hfr strains. Investigation of the properties of the transconjugants obtained on crossing of stable Hfr strains with R-recipients rec+ showed that same of them had plasmid DNA with a higher molecular mass as compared to that of plasmid pVD1 DNA. The presence of this DNA was connected with formation of R' plasmid as a result of an irregular exclusion of plasmid pVD1 from the chromosome of stable Hfr bacteria. On the basis of the results a simple method was proposed for selection of R' plasmids having a number of advantages over the classical ones. The perspectives of using thermostable derivatives of RP1 for cloning the chromosome genes are discussed.     

Incorporation of the ampicillin resistance transposon into the Escherichia coli K-12 chromosome and into plasmids]

The mutant pEG1 of R-factor RP4 with temperature-sensitive defect in replication, carrying a transposable ampicillin resistance element Tn1 was used to define the frequency of insertion of this element into Escherichia coli K-12 chromosome and some other plasmids. Our results indicate that the frequency of colony forming by bacteria with pEG1-factor on ampicillin medium in non-permissive conditions corresponds to the frequency of Tn1 insertion into bacterial chromosome or some other plasmid (in case when the strains are carrying a second plasmid). The frequency of Tn1 insertion into the chromosome is about 4.10(-4). The defect in recA gene produce no serious change in the frequency of Tn1 insertion into the bacterial chromosome. The translocation of Tn1 element from pEG1-factor to R483, R6 and ColE1 plasmids occurs at 10 to 100-fold-higher frequency than from the plasmid to the chromosome. The insertion of Tn1 into the F'-factor KLF10 and R-factor R64-11 occurs at far lower frequency than that to plasmids R6, R483, or ColE1.     

Effective PCR detection of vegetative and dormant bacterial cells due to a unified method for preparation of template DNA encased within cell envelopes

The unified method of template preparation for PCR in the form of DNA covered by permeabilized cell envelopes was used for the cells of different physiological status (vegetative, dormant forms of different types, and nonviable micromummies). The procedure for the preparation of template DNA included one-stage (boiling in a buffer with chaotropic salts) or two-stage (boiling in a buffer with chaotropic salts followed by treatment with proteinase K) sample preparation. The proposed method proved effective for detection of not only vegetative cells but also of the bacillary spores and the cystlike dormant cells (CLC) of non-spore-forming bacteria. For example, the two-stage sample preparation of Bacillus cereus spores resulted in the PCR sensitivity increase up to the detection level of 3–30 spores per sample; the one-stage sample preparation was three orders of magnitude less efficient (10₄ spores per sample). An increase in the sensitivity of PCR detection (4–10-fold) owing to the use of the two-stage sample preparation was shown for bacillary, staphylococcal, and mycobacterial CLC. The possibility of PCR detection of staphylococcal micromummies with irreversibly lost viability, which were therefore undetectable by plating techniques, was also demonstrated. The application of the unified sample preparation method ensuring efficacious PCR detection of bacterial cells, irrespective of their physiological state, may be a promising approach to more complete detection of microbial diversity and the overall insemination of natural substrates.     

Structural variability of DNA-containing Mg-pyrophosphate microparticles: optimized conditions to produce particles with desired size and morphology

Our previous studies demonstrated the formation of structurally diverse DNA-containing microparticles (DNA MPs) in PCR with Mg-pyrophosphate (MgPPi) as the structure-forming component. These DNA MPs were referred to major structural types: microdisks (2D MPs) with nanometer thickness and 3D MPs with sophisticated morphology and constructed from intersecting disks and their segments. Little is known about factors that influence both the morphology and size of DNA MPs, and the present study was aimed at fulfilling this gap. We showed that the addition of Mn²⁺ cations to PCR mixtures caused the profound changes in MPs morphology, depending on DNA polymerase used (KlenTaq or Taq). Asymmetric PCR with 20-fold decrease in the concentration of one of two primers facilitated the predominant formation of microdisks with unusual structure. The addition of 1 mM Na-pyrophosphate to PCR mixtures with synthesized DNA and subsequent thermal cycling (10–15 cycles) were optimal to produce microdisks or nanometer 3D particles. Using electron microscopy, we studied also the structure of inorganic micro- and nanoparticles from MgPPi, formed during multiple heating and cooling cycles of a mixture of Mg²⁺ and Na-pyrophosphate in various regimes. Also, we found the conditions to yield planar (Mg·Mn)PPi nanocrystals (diameter ~100 nm and thickness ~10 nm) which efficiently adsorbed exogenous DNA. These inorganic nanoparticles are promising for DNA delivery in transfection studies. Mechanisms to be involved in structural modifications of MPs and perspectives of their practical application are discussed.