A Starch Deficient Mutant of Arabidopsis thaliana with Low ADPglucose Pyrophosphorylase Activity Lacks One of the Two Subunits of the Enzyme

A starch deficient mutant of Arabidopsis thaliana (L.) Heynh. has been isolated in which leaf extracts contain only about 5% as much activity of ADPglucose pyrophosphorylase (EC 2.7.7.27) as the wild type. A single, nuclear mutation at a previously undescribed locus designated adg2 is responsible for the mutant phenotype. Although the mutant contained only 5% as much ADPglucose pyrophosphorylase activity as the wild type, it accumulated 40% as much starch when grown in a 12 hour photoperiod. The mutant also contained about 40% as much starch as the wild type when grown in continuous light, suggesting that the rate of synthesis regulates its steady state accumulation. Immunological analysis of leaf extracts using antibodies against the spinach 54 and 51 kilodalton (kD) ADPglucose pyrophosphorylase subunits indicated that the mutant is deficient in a cross-reactive 54 kD polypeptide and has only about 4% as much as the wild type of a cross-reactive 51 kD polypeptide. This result and genetic studies suggested that adg2 is a structural gene which codes for the 54 kD polypeptide, and provides the first functional evidence that the 54 kD polypeptide is a required component of the native ADPglucose pyrophosphorylase enzyme.     

Characterization of an HSP70 Cognate Gene Family in Arabidopsis

Analysis of the polypeptide composition of extracts from heat-shocked leaves of Arabidopsis indicated the presence of at least 12 HSP70-related polypeptides, most of which were constitutively expressed. In vitro translation of mRNA from heat-shocked and control leaves indicated that the amount of mRNA encoding four HSP70 polypeptides was increased strongly by heat-shock. Three Arabidopsis genes which exhibit homology to a Drosophila HSP70 gene were cloned. Two of the three genes are arranged in direct orientation approximately 1.5 kilobases apart. The third gene is not closely linked to the other two. Nucleotide sequence analysis of the 5′ regions of the two linked genes revealed that both contain a TATA box, the CAAT motif, and several short sequences which are homologous to the Drosophila heat-shock consensus sequence. The deduced partial amino acid sequence of the open reading frames were 79 and 72% homologous to the corresponding regions of the Drosophila HSP70-cognate and HSP70 sequences, respectively. As with the two maize HSP70 genes which have been characterized, and the Drosophila HSP70-cognate genes, the Arabidopsis genes contained a putative intron in the codon specifying amino acid 72. Analysis of mRNA levels with gene-specific oligonucleotide probes indicated that two of the genes were not expressed or were expressed at very low levels in leaves during normal growth or after heat-shock, whereas the other gene was constitutively expressed. By analogy with the results of similar studies of other organisms, it appears that the three cloned genes are members of a small family which are most closely related to the HSP70-cognate genes found in other species.     

Physiological and biochemical events leading to vitrification of plants cultured in vitro

Water content, peroxidase activity and isoperoxidases, phenylalanine ammonia-lyase activity and phenolic content were comparatively analyzed in tissues of normal and vitreous plants cultured in vitro. The release of ethylene in flask atmospheres by normal and vitrifying plants was also measured. On the basis of the results, it is hypothesized that vitrification results from a burst of ethylene controlled by the peroxidase-IAA-oxidase system. An initiating stress (e.g. excess of cytokinins or of NH₄⁺ ions) would mediate the enhancement of the activity of soluble and membrane-bound peroxidases through a rapid modification of the phenolic level. The excess of ethylene in the atmosphere of stressed plants would retroinhibit its own biosynthesis and as a consequence decrease the activities of PAL and acidic peroxidases, thus hindering lignification processes. A parallel decrease in cellulose synthesis due to a diverted conversion of sugars to amino acids is expected (from data in the literature). Deficiency of both cellulose and lignin would allow more water uptake due to reduced wall pressure and bring about the hyperhydric malformations.     

Changes in ascorbic acid content and ascorbate peroxidase activity during the development of Acetabularia mediterranea

We cloned ras-related sequences from goldfish genomic libraries constructed as recombinants using the lambda phage. Restriction enzyme mapping of the clones obtained revealed three kinds of ras-related sequences among approximately 350,000 genomic clones. One of these clones was partially sequenced. Comparison with the nucleotide sequences of mammalian ras genes showed that the determined sequences covered the predicted amino acid coding regions and parts of the intervening regions. The predicted amino acid sequences of the cloned ras-related goldfish gene suggested that the coding region is localized separately in DNA, and that its exon-intron boundaries are exactly the same as those of corresponding mammalian genes. The nucleotide and amino acid sequences of the goldfish ras-related gene may have extensive homologies to mammalian p 21 protein. Among the three mammalian ras proteins, the predicted amino acid sequence of the sequenced ras-related goldfish clone is most closely homologous (96%) to the Kirsten ras protein. Differences in the predicted amino acid sequence were greatest in the sequence predicted from the fourth exon; fewer differences were found in the sequence from the third exon, and only slight or no differences were found in the sequence predicted for the first and second exons. The 12th and 61st amino acids from the N-terminal of the protein, which are thought to be critical positions for GTP binding and catalysis, are both conserved in the goldfish protein.(ABSTRACT TRUNCATED AT 250 WORDS)     

Protection against Leishmania major in BALB/c mice by adoptive transfer of a T cell clone recognizing a low molecular weight antigen released by promastigotes

We have shown previously that BALB/c mice can be protected against a fatal infection with Leishmania major by adoptive transfer of a T cell line recognizing a protective soluble fraction (fraction 9) of promastigotes. We now describe the isolation and characterization of a T cell clone (9.1-2) that also transfers protective immunity against Leishmania. After Ag or mitogen stimulation, this clone secrets IL-2 and IFN-gamma, but not IL-4 or IL-5. The clone preferentially recognizes L. major fraction 9, and in addition, soluble Ag from Leishmania donovani, Leishmania amazonensis, and Leishmania braziliensis, but not from the related flagellates, Trypanosoma cruzi or Crithidia fasciculata. Besides being contained in fraction 9, the stimulatory Ag is also released from the parasite, because concentrated promastigote culture supernatants induced IFN-gamma production by 9.1-2. By means of T cell immunoblotting, we determined that 9.1-2 recognized a protein with a relative m.w. between 8,000 and 12,000, and within this region is a predominant protein contained in fraction 9 of approximately 10,000 m.w. These data identify a new candidate Ag for immunization against protozoa belonging to the genus Leishmania.     

Isolation and Characterization of a Ferredoxin Gene from Arabidopsis thaliana

We report the cloning and characterization of an Arabidopsis thaliana (L.) Heynh. (Columbia ecotype) ferredoxin gene (Fed A). Sequence analysis of a genomic clone shows an intron-free, 444-base pair open reading frame which encodes a 96 amino acid mature ferredoxin polypeptide preceded by a 52 amino acid transit peptide. Comparison with other plant ferredoxin proteins suggests that Fed A encodes a leaf ferredoxin. Genomic Southern blot analysis indicates the presence of a second, weakly related gene, consistent with other reports of at least two ferredoxins in plants. The Fed A gene promoter contains two regions, ACGCCACGTGGTAGATAGGATT (G-I box) and CCACGCCATTTCCACAAGC (CCAC box), which are strongly conserved in both sequence and position between the Arabidopsis and pea ferredoxin genes. Similarities with other better characterized plant promoter elements are also discussed.     

Maternal cell contamination in amniotic fluid samples as a consequence of the sampling technique

Maternal cell contamination in amniotic fluid samples is easily detected by in situ hybridization if the karyotype of the fetus differs from the karyotype of the mother. One out of two amniotic fluid samples appears to contain more than 20% maternal cells. Bloody samples often contain even more than 50% maternal cells. Maternal cells can also be identified on the basis of their nuclear morphology. Maternal cell contamination is regularly observed in pregnancies with an anterior placenta, whereas it is rare in posterior placenta pregnancies. The maternal cells are therefore thought to be artificially introduced into the amniotic fluid sample, as a result of placental bleeding during amniocentesis. The implications of maternal cell contamination for prenatal diagnosis using uncultured amniotic fluid samples are discussed.     

DNA binding factor GT-2 from Arabidopsis

Complementary DNA clones encoding a DNA-binding factor have been obtained from Arabidopsis by DNA hybridization with a GT-2 factor cDNA clone from rice. The GT-2 gene appears to be present as a single copy in the Arabidopsis genome and is transcribed as a 2.1 kb mRNA which is not light-regulated. The longest open reading frame in the sequenced clones predicts a protein of 65 kDa, beginning with the first in-frame methionine. The protein contains basic, acidic, and proline/glutamine-rich motifs and has significant amino acid sequence homology to the rice GT-2 factor, including three regions of 50–75 amino acids each of greater than 60% identity. Two of these regions are predicted to form similar trihelix structures postulated to be involved in selective binding to specific variations of a GT-box motif DNA sequence found in the promoter regions of several plant genes. Except for weak similarity to a tobacco GT-box binding factor, GT-1a/B2F, Arabidopsis GT-2 has no similarity to other sequences in the databases. DNA-binding studies show that Arabidopsis GT-2 has binding characteristics similar to those of the rice GT-2 factor, but dissimilar to those of the tobacco GT-1a/B2F factor. The data indicate that a DNA-binding factor containing domains of similar structure and target-sequence specificity has been conserved between monocots and dicots.     

Gap junction structures: Analysis of the x-ray diffraction data

Models for the spatial distribution of protein, lipid and water in gap junction structures have been constructed from the results of the analysis of X-ray diffraction data described here and the electron microscope and chemical data presented in the preceding paper (Caspar, D. L. D., D. A. Goodenough, L. Makowski, and W.C. Phillips. 1977. 74:605-628). The continuous intensity distribution on the meridian of the X-ray diffraction pattern was measured, and corrected for the effects of the partially ordered stacking and partial orientation of the junctions in the X-ray specimens. The electron density distribution in the direction perpendicular to the plane of the junction was calculated from the meridional intensity data. Determination of the interference function for the stacking of the junctions improved the accuracy of the electron density profile. The pair-correlation function, which provides information about the packing of junctions in the specimen, was calculated from the interference function. The intensities of the hexagonal lattice reflections on the equator of the X-ray pattern were used in coordination with the electron microscope data to calculate to the two-dimensional electron density projection onto the plane of the membrane. Differences in the structure of the connexons as seen in the meridional profile and equatorial projections were shown to be correlated to changes in lattice constant. The parts of the junction structure which are variable have been distinguished from the invariant parts by comparison of the X-ray data from different specimens. The combination of these results with electron microscope and chemical data provides low resolution three- dimensional representations of the structures of gap junctions.