Morphological and molecular screening of rice germplasm lines for low soil P tolerance

Phosphorus (P) is an essential macronutrient to all crops including rice and it plays a key role in various plant activities and development. Low availability of P in the soils negatively, influences rice crop growth and causes significant yield loss. In the present study, we characterized a set of 56 germplasm lines for their tolerance to low soil P by screening them at low soil P and optimum soil P levels along with low soil P tolerant and sensitive check varieties. These lines were genotyped for the presence/absence of tolerant allele with respect to the major low soil P tolerance QTL, Pup1, using a set of locus specific PCR-based markers, viz., K46-1, K46-2, K52 and K46CG-1. High genetic variability was observed for various traits associated with low soil P tolerance. The yield parameters from normal and low soil P conditions were used to calculate stress tolerance indices and classify the genotypes according to their tolerance level. Out of the total germplasm lines screened, 15 lines were found to be tolerant to low soil P condition based on the yield reduction in comparison to the tolerant check, but most of them harbored the complete or partial Pup1 locus. Interestingly, two tolerant germplasm lines, IC216831 and IC216903 were observed to be completely devoid of Pup1 and hence they can be explored for new loci underlying low soil P tolerance.

     

Potential Application of Turnip Oil (Raphanus sativus L.) for Biodiesel Production: Physical–Chemical Properties of Neat Oil, Biofuels and their Blends with Ultra-Low Sulphur Diesel (ULSD)

Turnip oil (TO; Raphanus sativus L.) produces seeds that contain around 26 wt% of inedible base stock that are suitable as a potential feedstock for biodiesel production. A turnip oil methyl ester (TME) was prepared from acid-catalyzed pretreated TO in an effort to evaluate important fuel properties of turnip oil-based biodiesel, such as kinematic viscosity, cloud point, pour point (PP), cold filter plugging point, acid value, oxidative stability and lubricity. A comparison was made with soybean oil methyl esters (SME) as per biodiesel fuel standards such as ASTM D6751 and EN 14214. TME was characterized using FTIR, HPLC and ¹H NMR. Except PP property, SME displays superior fuel properties compared to TME. Blends (B5 and B20) of TME in ultra-low sulphur diesel fuel (ULSD) were also assessed for the aforesaid fuel properties and compared to an analogous set of blends of soybean oil methyl ester in ULSD as per petro diesel fuel standards such as ASTM D975 and D7467. TME B5 blends in ULSD displayed improved PP property in comparison to neat ULSD and blends of SME in ULSD. It was demonstrated that the B5 and B20 blends of TME in ULSD had acceptable fuel properties as per ASTM D975 (for B5 blend) and ASTM D7467 (for B20 blend). In summary, turnip oil has potential as an alternative, non-food feedstock for biodiesel production.     

Synthesis and antihyperglycemic activity profiles of novel thiazolidinedione derivatives

A number of thiazolidine-2,4-diones derivatives having carboxylic ester appendage at N-3 were synthesized and their antihyperglycemic activity was evaluated. Many of these derivatives as well as their corresponding carboxylic acid showed significant improvement on post-prandial hyperglycemia in normal rats, in contrast to their poor agonist activity at PPARgamma.     

Synthesis of bicyclic biaryls as glucose-6-phosphatase inhibitors

Biaryls, 7-naphthyl-5-s-amino-2,3-dihydrobenzo[b]thiophene-4-carbonitriles (3a-e), 8-(1-naphthyl)-6-s-amino-isothiochroman-5-carbonitriles (6a-d), 4-(1-naphthyl)-2-s-aminobezocycloalkene-1-carbonitriles (6e-j), 8-naphthyl-6-s-amino-2-ethyl-1,2,3,4-tetrahydro-isoquinoline-5-carbonitrle (6k-n), 1-naphthyl-3-s-amino-10H-9-thia-phenantherene-4-carbonitriles (8a-e) and 1-(1-naphthyl)-3-s-amino-9,10-dihydrophenantherene-4-carbonitriles (8f-i) have been prepared through carbanion induced ring transformation reactions of 6-naphthyl-3-cyano-4-s-amino-2H-pyran-2-ones (1) from respective ketones (2, 5, and 7). These compounds have been evaluated for their glucose-6-phosphatase inhibitory activity and only 6a, c, j, m, c, d, h displayed significant inhibition of the glucose-6-phosphatase.     

From oligomers to molecular giants of soybean oil in supercritical carbon dioxide medium: 1. Preparation of polymers with lower molecular weight from soybean oil

Polymers with a low molecular weight derived from soybean oil have been prepared in a supercritical carbon dioxide medium by cationic polymerization. Boron trifluoride diethyl etherate was used as an initiator. Influences of polymerization temperature, amount of initiator, and carbon dioxide pressure on the molecular weight were investigated. It is shown that the higher polymerization temperature favors polymers with relatively higher molecular weights. Larger amounts of initiator also provide polymers with higher molecular weights. Higher pressure favors polymers with relatively higher molecular weights. The applications of these soy-based materials will be in the lubrication and hydraulic fluid areas.     

Sero-prevalence and incidence of A/H1N1 2009 influenza infection in Scotland in winter 2009-2010

Background

Sero-prevalence is a valuable indicator of prevalence and incidence of A/H1N1 2009 infection. However, raw sero-prevalence data must be corrected for background levels of cross-reactivity (i.e. imperfect test specificity) and the effects of immunisation programmes.

Methods and Findings

We obtained serum samples from a representative sample of 1563 adults resident in Scotland between late October 2009 and April 2010. Based on a microneutralisation assay, we estimate that 44% (95% confidence intervals (CIs): 40–47%) of the adult population of Scotland were sero-positive for A/H1N1 2009 influenza by 1 March 2010. Correcting for background cross-reactivity and for recorded vaccination rates by time and age group, we estimated that 34% (27–42%) were naturally infected with A/H1N1 2009 by 1 March 2010. The central estimate increases to >40% if we allow for imperfect test sensitivity. Over half of these infections are estimated to have occurred during the study period and the incidence of infection in late October 2009 was estimated at 4.3 new infections per 1000 people per day (1.2 to 7.2), falling close to zero by April 2010. The central estimate increases to over 5.0 per 1000 if we allow for imperfect test specificity. The rate of infection was higher for younger adults than older adults. Raw sero-prevalences were significantly higher in more deprived areas (likelihood ratio trend statistic = 4.92,1 df, P = 0.03) but there was no evidence of any difference in vaccination rates.

Conclusions

We estimate that almost half the adult population of Scotland were sero-positive for A/H1N1 2009 influenza by early 2010 and that the majority of these individuals (except in the oldest age classes) sero-converted as a result of natural infection with A/H1N1 2009. Public health planning should consider the possibility of higher rates of infection with A/H1N1 2009 influenza in more deprived areas.     

The role of virus infection in a simple phytoplankton zooplankton system

Many planktonic species show spectacular bursts ("blooms") in population density. Though viral infections are known to cause behavioural and other changes in phytoplankton and other aquatic species, yet their role in regulating the phytoplankton population is still far from being understood. To study the role of viral diseases in the planktonic species, we model the phytoplankton-zooplankton system as a prey-predator system. Here the prey (phytoplankton) species is infected with a viral disease that divides the prey population into susceptible and infected classes, with the infected prey being more vulnerable to predation by the predator (zooplankton). The dynamical behaviour of the system is investigated from the point of view of stability and persistence both analytically and numerically. The model shows that infection can be sustained only above a threshold of force of infection, and, there exists a range in the infection rate where this system shows "bloom"-like stable limit cycle oscillations. The time series of natural "blooms" with different types of irregular oscillations can arise in this model simply from a biologically realistic feature, i.e., by the random variation of the epidemiological parameter (rate of infection) in the infected prey population. The difference in mean strength of infection alone can lead to the different types of patterns observed in natural planktonic blooms.     

Distinct functions of Cdk5(Y15) phosphorylation and Cdk5 activity in stress fiber formation and organization

Previous studies have shown that Cdk5 promotes lens epithelial cell adhesion. Here we use a cell spreading assay to investigate the mechanism of this effect. As cells spread, forming matrix adhesions and stress fibers, Cdk5(Y15) phosphorylation and Cdk5 kinase activity increased. Cdk5(Y15) phosphorylation was inhibited by PP1, a Src family kinase inhibitor. To identify the PP1-sensitive kinase, we transfected cells with siRNA oligonucleotides for cSrc and related kinases. Only cSrc siRNA oligonucleotides inhibited Cdk5(Y15) phosphorylation. Cdk5(pY15) and its activator, p35, colocalized with actin in stress fibers. To examine Cdk5 function, we inhibited Cdk5 activity under conditions that also prevent phosphorylation at Y15: expression of kinase inactive mutations Cdk5(Y15F) and Cdk5(K33T), and siRNA suppression of Cdk5. Stress fiber formation was severely inhibited. To distinguish between a requirement for Cdk5 kinase activity and a possible adaptor role for Cdk5(pY15), we used two methods that inhibit kinase activity without inhibiting phosphorylation at Y15: pharmacological inhibition with olomoucine and expression of the kinase inactive mutation, Cdk5(D144N). Stress fiber organization was altered, but stress fiber formation was not blocked. These findings indicate that Cdk5(Y15) phosphorylation and Cdk5 activity have distinct functions required for stress fiber formation and organization, respectively.     

Preparation and Evaluation of Jojoba Oil Methyl Esters as Biodiesel and as a Blend Component in Ultra-Low Sulfur Diesel Fuel

The jojoba plant (Simmondsia chinensis L.) produces seeds that contain around 50 to 60 wt.% of inedible long-chain wax esters that are suitable as a potential feedstock for biodiesel (BD) production. Jojoba oil methyl esters (JME) were prepared from acid-catalyzed pretreated jojoba oil in order to evaluate important fuel properties of jojoba-based BD, including kinematic viscosity, cloud point (CP), pour point (PP), cold filter plugging point (CFPP), acid value (AV), oxidative stability, and lubricity. A comparison was made with soybean oil methyl esters (SME) and relevant BD fuel standards such as ASTM D6751 and EN 14214. JME was characterized using Fourier transform infrared spectroscopy and ¹H and ¹³C nuclear magnetic resonance. The CP, PP, and CFPP of JME were ?13°C, ?16°C, and ?14°C, respectively, which were superior to SME. The kinematic viscosity (40°C) of JME was 6.67 mm²/s, which was higher than observed for SME. Blends (B5 and B20) of JME in ultra-low sulfur diesel fuel (ULSD) were also evaluated for the aforementioned fuel properties and compared to an analogous set of blends of SME in ULSD and relevant petro diesel fuel standards such as ASTM D975 and D7467. JME blends in ULSD displayed improved low-temperature properties in comparison to neat ULSD and blends of SME in ULSD. In summary, jojoba oil has potential as an alternative, nonfood feedstock for BD production.