Modelling the Effects of Water Stress and Temperature on Seed Germination of Radish and Cantaloupe

Cantaloupe (Cucumis melo L.) and radish (Raphanus sativus L.) are considered as important vegetables with potential for national and international markets due to their sugars, vitamins and minerals. This study arranged, therefore, to simultaneously investigate the effect of temperature (T) and water potential (ψ) on seed germination (SG) of these plants using two hydrothermal time (HTT) models and to determine cardinal Ts and base water potential (ψ_b(50)) for both species. The results indicated that SG of both species was more affected by ψ than T (p ≤ 0.001). At Ts below an optimum temperature (T_o) the ψ_b(50) was constant (− 0.582 and − 0.760 MPa for radish and cantaloupe, respectively) and then increased linearly by 0.0481 and 0.0446 MPa °C⁻¹ as T increased above T_o (as thermoinhibition) until 0 MPa at the ceiling temperature (T_c), respectively. As the first report, however, we observed that the T at which ψ_b(50) begins to change was the same here (that is, T_d = T_o), when determined by either model for both species. This result suggests that the assumption in Rowse and Finch-Savage’s model (T_d is often less and or very close to T_o) may be invalid in some cases. For both species, the base temperature (T_b) and T_o were not affected by ψ and were constant while there was an exception only for T_c for which the value declined with decreasing ψs (more negative). In general, the estimated T_b, T_o and T_c were 9.64, 21.3 and 33.0 °C for radish and 11.8, 28.3 and 45.7 °C for cantaloupe in the control condition (ψ = 0 MPa), respectively. The HTT models used here and their parameters, each with strengths and weaknesses, can be used as a predictive tool in both cantaloupe and radish SG simulation models. However, at first, we need to select an appropriate HTT model based on SG behavior of plant species and then use the best model for quantifying the response of SG across Ts and ψs.

     

MicroRNA signature associated with osteogenic lineage commitment

Cell-based approaches offer a potential therapeutic strategy for appropriate bone manufacturing. Capable of differentiating into multiple cell types especially osteoblasts spontaneously, unrestricted somatic stem cell (USSC) seems to be a suitable candidate. Recent studies have shown the involvement of microRNAs in several biological processes. miRNA microarray profiling was applied in order to identify the osteo-specific miRNA signature. Prior to this analysis, osteogenic commitment of osteoblasts was evaluated by measuring ALPase activity, biomineralization, specific staining and evaluation of some main osteogenic marker genes. To support our findings, various in silico explorations (for both putative targets and signaling pathways) and empirical analyses (miRNA transfections followed by qPCR of osteogenic indicators and ALPase activity measurement) were carried out. The function of GSK-3b inhibitor was also studied to investigate the role of WNT in osteogenesis. Transient modulation of multiple osteo-miRs (such as mir-199b, 1274a, 30b) with common targets (such as BMPR, TCFs, SMADs) as mediators of osteogenic pathways including cell-cell interactions, WNT and TGF-beta pathways, suggests a mechanism for rapid induction of the osteogenesis as an anti-miRNA therapy. The results of this research have identified the miRNA signature which regulates the osteogenesis mechanism in USSC. To conclude, our study reveals more details about the allocation of USSCs into osteogenic lineage through modulatory effect of miRNAs on targets and pathways required for creating a tissue-specific phenotype and may aid in future clinical interventions.     

A comparative study on nonviral genetic modifications in cord blood and bone marrow mesenchymal stem cells

The focus of both clinical and basic studies on stem cells is increasing due to their potentials in regenerative medicine and cell-based therapies. Recently stem cells have been genetically modified to enhance an existing character in or to bring a new property to them. However, accomplishment of declared goals requires detailed knowledge about their molecular characteristics which could be achieved by genetic modifications mostly through nonviral transfection strategies. Capable of differentiating into multiple cells, human unrestricted somatic stem cells (hUSSCs) and human mesenchymal stem cells (hMSCs) seem to be suitable candidates for transfection approaches. Involvement of microRNAs (miRNAs) in many biological processes makes their transfection evaluation valuable. Herein we investigated the efficacy and toxicity of four typically used transfection reagents (Arrest-In, Lipofectamine 2000, Oligofectamine and HiPerfect) systematically to deliver fluorescent labeled-miRNA and Green Fluorescent Protein (GFP) expressing plasmid into hUSSCs and hMSCs. The authenticity of stem cells was verified by differentiation experiments along with flow cytometry of surface markers. Our study revealed that stemness properties of these stem cells were not affected by transient transfection. Moreover the ratios of cell viability and transfection efficiency in both analyzed stem cells were reversed. Considering cell viability, the highest fraction of GFP-expressing cells was obtained using Oligofectamine (~50%) while the highest transfection rate of miRNA was achieved by Lipofectamine 2000 (~90%). Moreover dependency of hMSCs to size of transfected nucleic acid and time-dependency of Oligofectamine and their affection on the yield of transfection were observed. Cytotoxicity assessments also showed that hUSSCs are sensitive to HiPerFect. In addition cells treated by Lipofectamine showed morphological changes. Representing the efficient nucleic acid transfection, our research facilitates comprehensive genetic modification of stem cells and demonstrates powerful approaches to understand stem cell molecular regulation mechanisms, which eventually improves nonviral cell-mediated gene therapy.

Electronic supplementary material

The online version of this article (doi:10.1007/s10616-012-9430-9) contains supplementary material, which is available to authorized users.     

Accuracy evaluation of distance inverse square law in determining virtual electron source location in Siemens Primus linac

Aim

The aim of this study is to evaluate the accuracy of the inverse square law (ISL) method for determining location of virtual electron source (S_Vir) in Siemens Primus linac.

Phosphate solubilization potential and modeling of stress tolerance of rhizobacteria from rice paddy soil in northern Iran

The purposes of this study were to evaluate the phosphate solubilization activity of bacteria isolated from the rhizosphere of rice paddy soil in northern Iran, and to study the effect of temperature, NaCl and pH on the growth of these isolates by modeling. Three of the most effective strains from a total of 300 isolates were identified and a phylogenetic analysis was carried out by 16S rDNA sequencing. The isolates were identified as Pantoea ananatis (M36), Rahnella aquatilis (M100) and Enterobacter sp. (M183). These isolates showed multiple plant growth-promoting attributes such as phosphate solubilization activity and indole-3-acetic acid (IAA) production. The M36, M100 and M183 isolates were able to solubilize 172, 263 and 254 µg ml^?1 of Ca₃(PO₄)₂ after 5 days of growth at 28 °C and pH 7.5, and to produce 8.0, 2.0 and 3.0 μg ml^?1 of IAA when supplemented with l-tryptophan (1 mg ml^?1) for 72 h, at 28 °C and pH 7.0, respectively. The solubilization of insoluble phosphate was associated with a drop in the pH of the culture medium and there was an inverse relationship between pH and solubilized P (r = ?0.98, P < 0.0952). There were no significant differences among isolates in terms of acidity tolerance based on their confidence limits as assessed by segmented model analysis and all isolates were able to grow at pH 4.3–11 (with optimum at 7.0–7.5). Based on a sigmoidal trend of a three-parameter logistic model, the salt concentration required for 50 % inhibition was 8.15, 6.30 and 8.23 % NaCl for M36, M100 and M183 isolates, respectively. Moreover, the minimum and maximum growth temperatures estimated by the segmented model were 5.0 and 42.75 °C for M36, 12.76 and 40.32 °C for M100, and 10.63 and 43.66 °C for M183. The three selected isolates could be deployed as inoculants to promote plant growth in an agricultural environment.     

Quantification of soybean seed germination response to seed deterioration under PEG-induced water stress using hydrotime concept

This experiment was arranged to investigate the ability of hydrotime model (θ_H) for estimating soybean seed germination (cv. ‘JK’) under different accelerated aging periods (AAP, 0, 24, 48, and 72 h) at each of the following water potentials (ψ, 0, ??0.12, ??0.24, and ??0.36 MPa). Results indicated that both germination percentage (GP) and germination rate (GR) significantly influenced by ψ, AAP, and their interactions (P?<?0.01). GP and GR decreased by 62.6 and 47.3% with longer AAP from 0 to 72 h and by 90.7 and 81.5% with lower ψ from zero to ??0.36 MPa as compared to the control, respectively. Therefore, the effect of ψ on GP and GR was more than AAP. The θ_H value was constant (~?6.71 MPa h^?1) till 50.6 h AAP and then linearly declined with the rate of 0.1545 MPa h^?1 per hour increase in AAP until 72 h (~?50% lower than its initial value). The ψ_b(50) value was ? 0.343 MPa in the control and then increased (became more positive) by ~?70% until 72 h AAP (? 0.104 MPa). In general, GP and GR of soybean declined with the increasing ψ_b(50) which can be due to cell membrane damage and reduce the activity of enzymes and organelles during AAP. Based on our findings, the θ_H model could describe well these relationships and their parameters can nicely be used for simulating soybean seed germination under this condition.     

Simple benzene derivatives adsorption on defective single-walled carbon nanotubes: a first-principles van der Waals density functional study

We have investigated the interaction between open-ended zig-zag single-walled carbon nanotube (SWCNT) and a few benzene derivatives using the first-principles van der Waals density functional (vdW-DF) method, involving full geometry optimization. Such sp ²-like materials are typically investigated using conventional DFT methods, which significantly underestimate non-local dispersion forces (vdW interactions), therefore affecting interactions between respected molecules. Here, we considered the vdW forces for the interacting molecules that originate from the interacting π electrons of the two systems. The ?0.54 eV adsorption energy reveals that the interaction of benzene with the side wall of the SWCNT is typical of the strong physisorption and comparable with the experimental value for benzene adsorption onto the graphene sheet. It was found that aromatics are physisorbed on the sidewall of perfect SWCNTs, as well as at the edge site of the defective nanotube. Analysis of the electronic structures shows that no orbital hybridization between aromatics and nanotubes occurs in the adsorption process. The results are relevant in order to identify the potential applications of noncovalent functionalized systems.

Using hydrothermal time concept to describe sesame (<Emphasis Type="Italic">Sesamum indicum</Emphasis> L.) seed germination response to temperature and water potential

To quantify both temperature (T) and water potential (ψ) effects on sesame (Sesamum indicum L.) seed germination (SG) and also to determine the cardinal T _s for this plant, a laboratory experiment was carried out using hydrothermal time model (HTT). For this purpose, four sesame cultivars (‘Asbomahalleh’, ‘Darab’, ‘Dashtestan’ and ‘Yellowhite’) were germinated at seven constant T _s (20, 25, 30, 35, 37, 39 and 43 °C) at each of the following ψ _s (0, ? 0.12, ? 0.24 and ? 0.36 MPa; provided by PEG 8000). Germination rate (GR) and germination percentage (GP) significantly influenced by ψ, T and their interactions in all cultivars (P ≤ 0.01). There was no significant difference, based on the confidence intervals of the model coefficients, between cultivars, so an average of cardinal T _s was 14.7, 35.4 and 47.2 °C for the minimum (T _b), optimum (T _o) and maximum (T _c) T _s, respectively, in the control condition (0 MPa). Hydrotime values in all cultivars decreased when T was increased to T _o and then remained constant at T _s > T _o (15 MPa h^?1). An average value of ψ _b(50) was estimated to be ? 1.23 MPa at T _s ≤ T _o and then increased linearly (0.1041 MPa°Ch^?1, the slope of the relationship between ψ _b(50) and supra-optimal T _s) with T when T _s increased above T _o and finally reached to zero at T _c. The T _b and T _o values were not influenced by ψ, but T _c value decreased (from 47.2 for zero to 43.5 °C for ? 0.36 MPa) at supra-optimal T _s as a result of the effect of ψ on GR. Based on our findings, this model (as a predictive tool) and or the estimated parameter values in this study can easily be used in sesame SG simulation models to quantitatively characterize the physiological status of sesame seed populations at different T _s and ψ _s.     

Modeling seed germination in Melisa officinalis L. in response to temperature and water potential

Seed germination is greatly influenced by both temperature (T) and water potential (ψ) and these factors largely determine germination rate (GR) in the field. Quantitative information about T and ψ effects on seed germination in lemon balm (Melisa officinalis L.) is scarce. The main objective of this study was to quantify seed germination responses of lemon balm to T and ψ, and to determine cardinal temperatures in a laboratory experiment. A segmented model was used to describe the effects of ψ (i.e., T) on GR and other germination parameters. The segmented model estimates were 7.2 °C for base (T _b), 28.9 °C for optimum (T _o), 40.1 °C for ceiling temperature (T _c) and 1.64 physiological days (f _o) (equivalent to a GR_max of 0.610 d^?1 and a thermal time of 35.6 °C days) to reach 50 % maximum germination in the control (0 MPa) treatment (R ² = 0.99, RMSE = 0.005 day^?1). The inherent maximum rate of germination (days) was calculated by the [GR_max = 1/f _o] model. ψ affected cardinal temperatures. From 0 to ?0.76 MPa, when ψ increased, T _b was a constant 7.2 °C to ?0.38 MPa and increased linearly to 20.1 °C as ψ decreased. T _o and f _o increased linearly from 28.9 to 30 °C, and from 1.64 to 5.4 day^?1, respectively as ψ decreased. However, there was no signification difference in T _o as ψ decreased nor did T _c decrease from 40.1 to 35 °C as ψ decreased. T _b, T _c and GR_max were the sole parameters affected by ψ and could be used to characterize differences between ψ treatments with respect to GR at various Ts. Therefore, the segmented model and its parameters can be used in lemon balm germination simulation models.