Ageing Effect Evaluation on HD-sEMG Signals Using CCA Approach

ObjectivesThe objective of the proposed study is to exploit the technology of high-density surface electromyography (HD-sEMG), in order to evaluate the muscle activation in young and elderly subjects during a daily life gesture, namely, Sit To Stand (STS), using wireless connected ambulatory equipment (TMSi©) and Blind Source Separation (BSS) approach with Canonical Correlation Analysis (CCA).Materials and methodsSixteen subjects participated (50% females) divided into two categories (‘H1’: young (30.62 yrs ±5.92, 23.95 kg/m² ±3.08), versus ‘H2’: old (61.87 yrs ±7.98, 23.4 kg/m² ±3.38)), in the recording of HD-sEMG signals, using 32-electrodes square grids (4×8), during Sit To Stand (STS) motion, three times at spontaneous speed. The studied muscle is the Rectus Femoris (RF) muscle. The recorded HD-sEMG signals were analyzed with CCA approach to extract correlation coefficient sets according to two age categories (young versus old), in order to evaluate its discriminating power with ageing. Statistical tests (t-test) were used to evaluate the discrimination for these two categories.ResultsThe calculation of CCA correlation coefficients showed a significant difference between young and old category concerning the mean CCA correlation coefficient (P<0.001***) and also the standard deviation of the CCA correlation coefficients (P<0.0001****).ConclusionThe obtained results are promising and indicate a clear difference between the obtained source variability using CCA method between the young and the old tested subjects during daily life motion. Furthermore, these estimated sources seem to be impacted by both anatomical and functional modifications with ageing.     

Identification of Algerian Field-Caught Phlebotomine Sand Fly Vectors by MALDI-TOF MS

Background

Phlebotomine sand flies are known to transmit Leishmania parasites, bacteria and viruses that affect humans and animals in many countries worldwide. Precise sand fly identification is essential to prevent phlebotomine-borne diseases. Over the past two decades, progress in matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) has emerged as an accurate tool for arthropod identification. The objective of the present study was to investigate the usefulness of MALDI-TOF MS as a tool for identifying field-caught phlebotomine.

Methodology/Principal Findings

Sand flies were captured in four sites in north Algeria. A subset was morphologically and genetically identified. Six species were found in these areas and a total of 28 stored frozen specimens were used for the creation of the reference spectrum database. The relevance of this original method for sand fly identification was validated by two successive blind tests including the morphological identification of 80 new specimens which were stored at -80°C, and 292 unknown specimens, including engorged specimens, which were preserved under different conditions. Intra-species reproducibility and inter-species specificity of the protein profiles were obtained, allowing us to distinguish specimens at the gender level. Querying of the sand fly database using the MS spectra from the blind test groups revealed concordant results between morphological and MALDI-TOF MS identification. However, MS identification results were less efficient for specimens which were engorged or stored in alcohol. Identification of 362 phlebotomine sand flies, captured at four Algerian sites, by MALDI-TOF MS, revealed that the subgenus Larroussius was predominant at all the study sites, except for in M’sila where P. (Phlebotomus) papatasi was the only sand fly species detected.

Conclusion

The present study highlights the application of MALDI-TOF MS for monitoring sand fly fauna captured in the field. The low cost, reliability and rapidity of MALDI-TOF MS analyses opens up new ways in the management of phlebotomine sand fly-borne diseases.     

A Computational Framework for 3D Mechanical Modeling of Plant Morphogenesis with Cellular Resolution

The link between genetic regulation and the definition of form and size during morphogenesis remains largely an open question in both plant and animal biology. This is partially due to the complexity of the process, involving extensive molecular networks, multiple feedbacks between different scales of organization and physical forces operating at multiple levels. Here we present a conceptual and modeling framework aimed at generating an integrated understanding of morphogenesis in plants. This framework is based on the biophysical properties of plant cells, which are under high internal turgor pressure, and are prevented from bursting because of the presence of a rigid cell wall. To control cell growth, the underlying molecular networks must interfere locally with the elastic and/or plastic extensibility of this cell wall. We present a model in the form of a three dimensional (3D) virtual tissue, where growth depends on the local modulation of wall mechanical properties and turgor pressure. The model shows how forces generated by turgor-pressure can act both cell autonomously and non-cell autonomously to drive growth in different directions. We use simulations to explore lateral organ formation at the shoot apical meristem. Although different scenarios lead to similar shape changes, they are not equivalent and lead to different, testable predictions regarding the mechanical and geometrical properties of the growing lateral organs. Using flower development as an example, we further show how a limited number of gene activities can explain the complex shape changes that accompany organ outgrowth.     

Increase in Dickkopf-1 Serum Level in Recent Spondyloarthritis. Data from the DESIR Cohort

Objectives

To investigate DKK-1 and SOST serum levels among patients with recent inflammatory back pain (IBP) fulfilling ASAS criteria for SpA and associated factors.

Methods

The DESIR cohort is a prospective, multicenter French cohort of 708 patients with early IBP (duration >3 months and <3 years) suggestive of AxSpA. DKK-1 and SOST serum levels were assessed at baseline and were compared between the subgroup of patients fulfilling ASAS criteria for SpA (n = 486; 68.6%) and 80 healthy controls.

Results

Mean SOST serum levels were lower in ASAS+ patients than healthy controls (49.21 ± 25.9 vs. 87.8 ± 26 pmol/L; p<0.0001). In multivariate analysis, age (p = 5.4 10⁻⁹), CRP level (p<0.0001) and serum DKK-1 level (p = 0.001) were associated with SOST level. Mean DKK-1 serum levels were higher in axial SpA patients than controls (30.03 ± 15.5 vs. 11.6 ± 4.2 pmol/L; p<0.0001). In multivariate analysis, DKK-1 serum levels were associated with male gender (p = 0.03), CRP level (p = 0.006), SOST serum level (p = 0.002) and presence of sacroiliitis on radiography (p = 0.05). Genetic association testing of 10 SNPs encompassing the DKK-1 locus failed to demonstrate a significant contribution of genetics to control of DKK-1 serum levels.

Conclusions

DKK-1 serum levels were increased and SOST levels were decreased among a large cohort of patients with early axial SpA compared to healthy controls. DKK-1 serum levels were mostly associated with biological inflammation and SOST serum levels.     

In vivo analysis of local wall stiffness at the shoot apical meristem in Arabidopsis using atomic force microscopy

Whereas the morphogenesis of developing organisms is relatively well understood at the molecular level, the contribution of the mechanical properties of the cells to shape changes remains largely unknown, mainly because of the lack of quantified biophysical parameters at cellular or subcellular resolution. Here we designed an atomic force microscopy approach to investigate the elastic modulus of the outer cell wall in living shoot apical meristems (SAMs). SAMs are highly organized structures that contain the plant stem cells, and generate all of the aerial organs of the plant. Building on modeling and experimental data, we designed a protocol that is able to measure very local properties, i.e. within 40-100 nm deep into the wall of living meristematic cells. We identified three levels of complexity at the meristem surface, with significant heterogeneity in stiffness at regional, cellular and even subcellular levels. Strikingly, we found that the outer cell wall was much stiffer at the tip of the meristem (5 ± 2 MPa on average), covering the stem cell pool, than on the flanks of the meristem (1.5 ± 0.7 MPa on average). Altogether, these results demonstrate the existence of a multiscale spatialization of the mechanical properties of the meristem surface, in addition to the previously established molecular and cytological zonation of the SAM, correlating with regional growth rate distribution.     

Contributions of turgor pressure, the contractile ring, and septum assembly to forces in cytokinesis in fission yeast

A paradigm of cytokinesis in animal cells is that the actomyosin contractile ring provides the primary force to divide the cell [1]. In the fission yeast Schizosaccharomyces pombe, cytokinesis also involves a conserved cytokinetic ring, which has been generally assumed to provide the force for cleavage [2-4] (see also [5]). However, in contrast to animal cells, cytokinesis in yeast cells also requires the assembly of a cell wall septum [6], which grows centripetally inward as the ring closes. Fission yeast, like other walled cells, also possess high (MPa) turgor pressure [7-9]. Here, we show that turgor pressure is an important factor in the mechanics of cytokinesis. Decreasing effective turgor pressure leads to an increase in cleavage rate, suggesting that the inward force generated by the division apparatus opposes turgor pressure. The contractile ring, which is predicted to provide only a tiny fraction of the mechanical stress required to overcome turgor, is largely dispensable for ingression; once septation has started, cleavage can continue in the absence of the contractile ring. Scaling arguments and modeling suggest that the large forces for cytokinesis are not produced by the contractile ring but are driven by the assembly of cell wall polymers in the growing septum.     

The impact of mechanical compression on cortical microtubules in Arabidopsis: a quantitative pipeline

Exogenous mechanical perturbations on living tissues are commonly used to investigate whether cell effectors can respond to mechanical cues. However, in most of these experiments, the applied mechanical stress and/or the biological response are described only qualitatively. We developed a quantitative pipeline based on microindentation and image analysis to investigate the impact of a controlled and prolonged compression on microtubule behaviour in the Arabidopsis shoot apical meristem, using microtubule fluorescent marker lines. We found that a compressive stress, in the order of magnitude of turgor pressure, induced apparent microtubule bundling. Importantly, that response could be reversed several hours after the release of compression. Next, we tested the contribution of microtubule severing to compression‐induced bundling: microtubule bundling seemed less pronounced in the katanin mutant, in which microtubule severing is dramatically reduced. Conversely, some microtubule bundles could still be observed 16 h after the release of compression in the spiral2 mutant, in which severing rate is instead increased. To quantify the impact of mechanical stress on anisotropy and orientation of microtubule arrays, we used the nematic tensor based FibrilTool ImageJ/Fiji plugin. To assess the degree of apparent bundling of the network, we developed several methods, some of which were borrowed from geostatistics. The final microtubule bundling response could notably be related to tissue growth velocity that was recorded by the indenter during compression. Because both input and output are quantified, this pipeline is an initial step towards correlating more precisely the cytoskeleton response to mechanical stress in living tissues.     

Inter-population variability of leaf morpho-anatomical and terpenoid patterns of Pistacia atlantica Desf. ssp. atlantica growing along an aridity gradient in Algeria

Three Algerian populations of female Pistacia atlantica shrubs were investigated in order to check whether their terpenoid contents and morpho-anatomical parameters may characterize the infraspecific variability. The populations were sampled along a gradient of increasing aridity from the Atlas mountains into the northwestern Central Sahara.As evidenced by Scanning Electron Microscopy, tufted hairs could be found only on seedling leaves from the low aridity site as a population-specific trait preserved also in culture. Under common garden cultivation seedlings of the high aridity site showed a three times higher density of glandular trichomes compared to the low aridity site. Increased aridity resulted also in reduction of leaf sizes while their thickness increased. Palisade parenchyma thickness also increases with aridity, being the best variable that discriminates the three populations of P. atlantica.Analysis of terpenoids from the leaves carried out by GC-MS reveals the presence of 65 compounds. The major compounds identified were spathulenol (23 μg g⁻¹ dw), α-pinene (10 μg g⁻¹ dw), verbenone (7 μg g⁻¹ dw) and β-pinene (6 μg g⁻¹ dw) in leaves from the low aridity site; spathulenol (73 μg g⁻¹ dw), α-pinene (25 μg g⁻¹ dw), β-pinene (18 μg g⁻¹ dw) and γ-amorphene (16 μg g⁻¹ dw) in those from medium aridity and spathulenol (114 μg g⁻¹ dw), α-pinene (49 μg g⁻¹ dw), germacrene D (29 μg g⁻¹ dw) and camphene (23 μg g⁻¹ dw) in leaves from the high aridity site. Terpene concentrations increased with the degree of aridity: the highest mean concentration of monoterpenes (136 μg g⁻¹ dw), sesquiterpenes (290 μg g⁻¹ dw) and total terpenes (427 μg g⁻¹ dw) were observed in the highest arid site and are, respectively, 3-, 5- and 4-fold higher compared to the lower arid site. Spathulenol and α-pinene can be taken as chemical markers of aridity. Drought discriminating compounds in low, but detectable concentrations are δ-cadinene and β-copaene. The functional roles of the terpenoids found in P. atlantica leaves and principles of their biosynthesis are discussed with emphasis on the mechanisms of plant resistance to drought conditions.