Disrupted phylogeographical microsatellite and chloroplast DNA patterns indicate a vicariance rather than long‐distance dispersal origin for the disjunct distribution of the Chilean endemic Dioscorea biloba (Dioscoreaceae) around the Atacama Desert

Aim The Chilean endemic Dioscorea biloba (Dioscoreaceae) is a dioecious geophyte that shows a remarkable 600 km north–south disjunction in the peripheral arid area of the Atacama Desert. Its restricted present‐day distribution and probable Neogene origin indicate that its populations have a history linked to that of the Atacama Desert, making this an ideal model species with which to investigate the biogeography of the region. Location Chile, Atacama Desert and peripheral arid area. Methods Two hundred and seventy‐five individuals from nine populations were genotyped for seven nuclear microsatellite loci, and plastid trnL–F and trnT–L sequences were obtained for a representative subset of these. Analyses included the estimation of genetic diversity and population structure through clustering, Bayesian and analysis of molecular variance analyses, and statistical parsimony networks of chloroplast haplotypes. Isolation by distance was tested against alternative dispersal hypotheses. Results Microsatellite markers revealed moderate to high levels of genetic diversity within populations, with those from the southern Limarí Valley showing the highest values and northern populations showing less exclusive alleles. Bayesian analysis of microsatellite data identified three genetic groups that corresponded to geographical ranges. Chloroplast phylogeography revealed no haplotypes shared between northern and southern ranges, and little haplotype sharing between the two neighbouring southern valleys. Dispersal models suggested the presence of extinct hypothetical populations between the southern and northern ranges. Main conclusions Our results are consistent with prolonged isolation of the northern and southern groups, mediated by the life‐history traits of the species. Significant isolation was revealed at both large and moderate distances as gene flow was not evident even between neighbouring valleys. Bayesian analyses of microsatellite and chloroplast haplotype diversity identified the southern area of Limarí as the probable area of origin of the species. Our data do not support recent dispersal of D. biloba from the southern range into Antofagasta, but indicate the fragmentation of an earlier wider range, concomitant with the Pliocene–Pleistocene climatic oscillations, with subsequent extinctions of the Atacama Desert populations and the divergence of the peripheral ones as a consequence of genetic drift.     

Molecular phylogeny of the fungus gnat subfamilies Gnoristinae and Mycomyinae,and their position within Mycetophilidae (Diptera)

The phylogeny of the fungus gnat family Mycetophilidae (Diptera) is reconstructed with a focus on the species‐rich and taxonomically difficult subfamilies Gnoristinae and Mycomyinae. The multigene phylogenetic analyses are based on five nuclear (18S, 28S, CAD, MCS, ITS2) and four mitochondrial (12S, 16S, COI, CytB) gene markers. The analyses strongly support the monophyly of Mycetophilidae and the subfamilies Manotinae, Sciophilinae, Leiinae, and Mycomyinae, although Gnoristinae is paraphyletic with respect to Mycetophilinae. All the genera and groups of genera included are supported as monophyletic, except for Acomoptera Vockeroth, Boletina Staeger, Dziedzickia Johannsen, Ectrepesthoneura Enderlein, and Neoempheria Osten Sacken. Ancestral character state reconstructions were applied to two morphological features present in Gnoristinae and Mycomyinae (i.e. presence of setae on wing membrane and wing vein R₄) in order to assess their evolution. The wing vein R₄ appears as an unstable character, spread throughout different clades. A dated phylogeny of the family Mycetophilidae showed that most of the subfamilies of Mycetophilidae originated and diversified during the Cretaceous. The youngest subfamilies, originated in the Paleogene, appear to be Mycomyinae and Mycetophilinae.     

Comparison of statistics for candidate-gene association studies using cases and parents.

Studies of association between candidate genes and disease can be designed to use cases with disease, and in place of nonrelated controls, their parents. The advantage of this design is the elimination of spurious differences due to ethnic differences between cases and nonrelated controls. However, several statistical methods of analysis have been proposed in the literature, and the choice of analysis is not always clear. We review some of the statistical methods currently developed and present two new statistical methods aimed at specific genetic hypotheses of dominance and recessivity of the candidate gene. These new methods can be more powerful than other current methods, as demonstrated by simulations. The basis of these new statistical methods is a likelihood approach. The advantage of the likelihood framework is that regression models can be developed to assess genotype-environment interactions, as well as the relative contribution that alleles at the candidate-gene locus make to the relative risk (RR) of disease. This latter development allows testing of (1) whether interactions between alleles exist, on the scale of log RR, and (2) whether alleles originating from the mother or father of a case impart different risks, i.e., genomic imprinting.     

Testing the accuracy of methods for reconstructing ancestral states of continuous characters.

Many methods are available for estimating ancestral values of continuous characteristics, but little is known about how well these methods perform. Here we compare six methods: linear parsimony, squared-change parsimony, one-parameter maximum likelihood (Brownian motion), two-parameter maximum likelihood (Ornstein-Uhlenbeck process), and independent comparisons with and without branch-length information. We apply these methods to data from 20 morphospecies of Pleistocene planktic Foraminifera in order to estimate ancestral size and shape variables, and compare these estimates with measurements on fossils close to the phylogenetic position of 13 ancestors. No method produced accurate estimates for any variable: estimates were consistently less good as predictors of the observed values than were the averages of the observed values. The two-parameter maximum-likelihood model consistently produces the most accurate size estimates overall. Estimation of ancestral sizes is confounded by an evolutionary trend towards increasing size. Shape showed no trend but was still estimated very poorly: we consider possible reasons. We discuss the implications of our results for the use of estimates of ancestral characteristics.     

A high‐throughput method to quantify feeding rates in aquatic organisms: A case study with Daphnia

1. Food ingestion is one of the most basic features of all organisms. However, obtaining precise—and high‐throughput—estimates of feeding rates remains challenging, particularly for small, aquatic herbivores such as zooplankton, snails, and tadpoles. These animals typically consume low volumes of food that are time‐consuming to accurately measure.
2. We extend a standard high‐throughput fluorometry technique, which uses a microplate reader and 96‐well plates, as a practical tool for studies in ecology, evolution, and disease biology. We outline technical and methodological details to optimize quantification of individual feeding rates, improve accuracy, and minimize sampling error.
3. This high‐throughput assay offers several advantages over previous methods, including i) substantially reduced time allotments per sample to facilitate larger, more efficient experiments; ii) technical replicates; and iii) conversion of in vivo measurements to units (mL^‐1 hr^‐1 ind^‐1) which enables broad‐scale comparisons across an array of taxa and studies.
4. To evaluate the accuracy and feasibility of our approach, we use the zooplankton, Daphnia dentifera, as a case study. Our results indicate that this procedure accurately quantifies feeding rates and highlights differences among seven genotypes.
5. The method detailed here has broad applicability to a diverse array of aquatic taxa, their resources, environmental contaminants (e.g., plastics), and infectious agents. We discuss simple extensions to quantify epidemiologically relevant traits, such as pathogen exposure and transmission rates, for infectious agents with oral or trophic transmission.

     

Non‐pollinating cheater wasps benefit from seasonally poor performance of the mutualistic pollinating wasps at the northern limit of the range of Ficus microcarpa

1. Species interactions in tightly bound ecological mutualisms often feature highly specialised species' roles in which competitive exclusion may preclude multi‐species coexistence. Among the 800 fig (Ficus) species, it was originally considered that each was pollinated by their own wasp (Agaonidae). However, recent investigations show that this ‘one‐to‐one’ rule often breaks down, as fig species regularly host multiple agaonids but in ways suggesting that competitive processes still mediate biodiversity outcomes. 2. A phenological survey was conducted of the fig–fig wasp pair, Ficus microcarpa and its associated pollinating wasp, alongside its sister species, the cheating wasp, in Xishuangbanna, China. 3. Reproductive output underwent extreme seasonal variation. Seed and pollinator production fell markedly during cooler, drier months, although high levels of fig production continued. However, this resource was predominantly utilised by the cheater species, which offers no pollination services. Pollinators and cheaters rarely co‐occur, suggesting that temporal coexistence is constrained by competition for access to figs. 4. The overall findings indicate periodic rearrangements of mutualism dynamics, probably resulting from a strongly seasonal environment. Sympatric co‐occurrence may result from a window of opportunity for a functionally divergent agaonid, potentially due to constraints on the main pollinator in adapting to variable year‐round conditions that prevent competitive exclusion.     

What Do We Know About Metal Recycling Rates?

The recycling of metals is widely viewed as a fruitful sustainability strategy, but little information is available on the degree to which recycling is actually taking place. This article provides an overview on the current knowledge of recycling rates for 60 metals. We propose various recycling metrics, discuss relevant aspects of recycling processes, and present current estimates on global end‐of‐life recycling rates (EOL‐RR; i.e., the percentage of a metal in discards that is actually recycled), recycled content (RC), and old scrap ratios (OSRs; i.e., the share of old scrap in the total scrap flow). Because of increases in metal use over time and long metal in‐use lifetimes, many RC values are low and will remain so for the foreseeable future. Because of relatively low efficiencies in the collection and processing of most discarded products, inherent limitations in recycling processes, and the fact that primary material is often relatively abundant and low‐cost (which thereby keeps down the price of scrap), many EOL‐RRs are very low: Only for 18 metals (silver, aluminum, gold, cobalt, chromium, copper, iron, manganese, niobium, nickel, lead, palladium, platinum, rhenium, rhodium, tin, titanium, and zinc) is the EOL‐RR above 50% at present. Only for niobium, lead, and ruthenium is the RC above 50%, although 16 metals are in the 25% to 50% range. Thirteen metals have an OSR greater than 50%. These estimates may be used in considerations of whether recycling efficiencies can be improved; which metric could best encourage improved effectiveness in recycling; and an improved understanding of the dependence of recycling on economics, technology, and other factors.