Fusarium solani pisi recombinant cutinase partitioning in peg/potassium phosphate aqueous two-phase systems

Summary An aqueous two-phase system of polyethylene glycol (PEG) and potassium phosphate was developed for extraction of a cutinase from cell debris of a recombinant Escherichia coli strain. Basic studies to identify the primary factors which affect cutinase partition, namely the influence of polymer molecular weight, polymer concentration and pH were carried out using a purified preparation of the cutinase. The enzyme partition coefficient was enhanced with decreasing PEG molecular weight, increasing tie-line length and pH.     

Liquid-liquid extraction of a recombinant cutinase from fermentation media with AOT reversed micelles

This work reports the extraction and back-extraction of an intracellular recombinant cutinase from complex biological media using AOT reversed micelles in isooctane. Cutinase was recovered from different complex media namely, fermentation broths and supernatants after cell disruption by osmotic shock and sonication. The application of the AOT reversed micellar system to the extraction of cutinase allowed activity yields and purification factors ranging from about 5% to 50% and 1.2 to 10.2, respectively, depending on the biological medium.Maria das Graças Carneiro da Cunha, from ITEP-Instituto Tecnológico do Estado de Pernambuco, acknowledges a Ph.D fellowship from Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq) and Centro de Pesquisa Aggeu Magalhães, Recife — PE — Brasil. E. P. Melo thanks Junta Nacional de Investigação Científica, Lisboa, Portugal, for providing a Ph.D. fellowship. The scientific support given by Prof. Sílvia M. B. Costa for the spectroscopic data and further discussions are particularly acknowledged.This work was partly financed by the BRIDGE and BIOTECHNOLOGY Programmes (Contracts BIOT-CT91-0274(DTEE) and BIOT 2 CT-943016).     

Study of the Stability Of Vaccinium myrtillus Peroxidase in Reverse Micellar Systems

The stability of a cationic peroxidase isolated and purified from a cell suspension of Vaccinium myrtillus, microencapsulated in reverse micelles of sodium dioctylsulfosuccinate (AOT) was evaluated. By using a central composite design (CCD), some relevant parameters for the enzymatic activity, such as surfactant and water concentration, pH and buffer molarity, were analysed. The response surface curves showed that 50 mM AOT, 500 mM water, 80 mM buffer and pH 7.6 were the best conditions for enzyme stability. The effect of carbohydrates and polyols on enzyme stability was also evaluated. At 20 mM, carbohydrates like arabinose, and trehalose increased the enzymatic stability by a factor of 4.4 and 2.3, respectively, but melezitose had no effect. From the three polyols tested, inositol and sorbitol increased the peroxidase stability by a factor of 3.8 and 1.8, respectively, while mannitol had no effect.     

Exercise training in childhood-onset systemic lupus erythematosus: a controlled randomized trial

Introduction

Exercise training has emerged as a promising therapeutic strategy to counteract physical dysfunction in adult systemic lupus erythematosus. However, no longitudinal studies have evaluated the effects of an exercise training program in childhood-onset systemic lupus erythematosus (C-SLE) patients. The objective was to evaluate the safety and the efficacy of a supervised aerobic training program in improving the cardiorespiratory capacity in C-SLE patients.

Methods

Nineteen physically inactive C-SLE patients were randomly assigned into two groups: trained (TR, n = 10, supervised moderate-intensity aerobic exercise program) and non-trained (NT, n = 9). Gender-, body mass index (BMI)- and age-matched healthy children were recruited as controls (C, n = 10) for baseline (PRE) measurements only. C-SLE patients were assessed at PRE and after 12 weeks of training (POST). Main measurements included exercise tolerance and cardiorespiratory measurements in response to a maximal exercise (that is, peak VO₂, chronotropic reserve (CR), and the heart rate recovery (ΔHRR) (that is, the difference between HR at peak exercise and at both the first (ΔHRR1) and second (ΔHRR2) minutes of recovery after exercise).

Results

The C-SLE NT patients did not present changes in any of the cardiorespiratory parameters at POST (P > 0.05). In contrast, the exercise training program was effective in promoting significant increases in time-to-exhaustion (P = 0.01; ES = 1.07), peak speed (P = 0.01; ES = 1.08), peak VO₂ (P = 0.04; ES = 0.86), CR (P = 0.06; ES = 0.83), and in ΔHRR1 and ΔHRR2 (P = 0.003; ES = 1.29 and P = 0.0008; ES = 1.36, respectively) in the C-SLE TR when compared with the NT group. Moreover, cardiorespiratory parameters were comparable between C-SLE TR patients and C subjects after the exercise training intervention, as evidenced by the ANOVA analysis (P > 0.05, TR vs. C). SLEDAI-2K scores remained stable throughout the study.

Conclusion

A 3-month aerobic exercise training was safe and capable of ameliorating the cardiorespiratory capacity and the autonomic function in C-SLE patients.

Trial registration

NCT01515163.     

Stimuli-Responsive magnetic nanoparticles for monoclonal antibody purification

Monoclonal antibodies (mAbs) are important therapeutic proteins. One of the challenges facing large-scale production of monoclonal antibodies is the capacity bottleneck in downstream processing, which can be circumvented by using magnetic stimuli-responsive polymer nanoparticles. In this work, stimuli-responsive magnetic particles composed of a magnetic poly(methyl methacrylate) core with a poly(N-isopropylacrylamide-co-acrylic acid) (P(NIPAM-co-AA)) shell cross-linked with N, N'-methylenebisacrylamide were prepared by miniemulsion polymerization. The particles were shown to have an average hydrodynamic diameter of 317 nm at 18°C, which decreased to 277 nm at 41°C due to the collapse of the thermo-responsive shell. The particles were superparamagnetic in behavior and exhibited a saturation magnetization of 12.6 emu/g. Subsequently, we evaluated the potential of these negatively charged stimuli-responsive magnetic particles in the purification of a monoclonal antibody from a diafiltered CHO cell culture supernatant by cation exchange. The adsorption of antibodies onto P(NIPAM-co-AA)-coated nanoparticles was highly selective and allowed for the recovery of approximately 94% of the mAb. Different elution strategies were employed providing highly pure mAb fractions with host cell protein (HCP) removal greater than 98%. By exploring the stimuli-responsive properties of the particles, shorter magnetic separation times were possible without significant differences in product yield and purity.     

Continuous purification of antibodies from cell culture supernatant with aqueous two-phase systems: From concept to process

An aqueous two-phase extraction (ATPE) process based on a PEG/phosphate system was developed for the capture of human immunoglobulin G and successfully applied to a Chinese hamster ovary and a PER.C6® cell supernatant. A continuous ATPE process incorporating three different steps (extraction, back-extraction, and washing) was set up and validated in a pump mixer-settler battery. Most of the higher molecular weight cell supernatant impurities were removed during the extraction step, while most of the lower molecular weight impurities were removed during the subsequent steps. A global recovery yield of 80% and a final protein purity of more than 99% were obtained for the IgG purification from a CHO cell supernatant, representing a 155-fold reduction in the protein/IgG ratio. For the purification of IgG from a PER.C6® cell supernatant, a global recovery yield of 100%, and a host cell protein purity were attained, representing a 22-fold reduction in the host cell protein/IgG ratio. These results, thus, open promising perspectives for the application of the developed ATPE process as a platform for the capture of antibodies. In fact, this new process has shown the ability to successfully recover and purify different antibodies from distinct cell culture supernatants. This technology can also overcome some of the limitations encountered using the typical chromatographic processes, besides inherent advantages of scalability, process integration, capability of continuous operation, and economic feasibility.     

Automated Entire Thrombus Density Measurements for Robust and Comprehensive Thrombus Characterization in Patients with Acute Ischemic Stroke

Background and Purpose

In acute ischemic stroke (AIS) management, CT-based thrombus density has been associated with treatment success. However, currently used thrombus measurements are prone to inter-observer variability and oversimplify the heterogeneous thrombus composition. Our aim was first to introduce an automated method to assess the entire thrombus density and then to compare the measured entire thrombus density with respect to current standard manual measurements.

Materials and Method

In 135 AIS patients, the density distribution of the entire thrombus was determined. Density distributions were described using medians, interquartile ranges (IQR), kurtosis, and skewedness. Differences between the median of entire thrombus measurements and commonly applied manual measurements using 3 regions of interest were determined using linear regression.

Results

Density distributions varied considerably with medians ranging from 20.0 to 62.8 HU and IQRs ranging from 9.3 to 55.8 HU. The average median of the thrombus density distributions (43.5 ± 10.2 HU) was lower than the manual assessment (49.6 ± 8.0 HU) (p<0.05). The difference between manual measurements and median density of entire thrombus decreased with increasing density (r = 0.64; p<0.05), revealing relatively higher manual measurements for low density thrombi such that manual density measurement tend overestimates the real thrombus density.

Conclusions

Automatic measurements of the full thrombus expose a wide variety of thrombi density distribution, which is not grasped with currently used manual measurement. Furthermore, discrimination of low and high density thrombi is improved with the automated method.     

Integration of production and aqueous two-phase systems extraction of extracellular Fusarium solani pisi cutinase fusion proteins

Genetic engineering was integrated with the production and purification of Fusarium solani pisi cutinases, in order to obtain the highest amount of enzyme activity units, after purification. An aqueous two-phase system (ATPS) of polyethylene glycol 3350, dipotassium phosphate and whole broth was used for the extraction of three extracellular cutinases expressed in Saccharomyces cerevisiae. The production/extraction process was evaluated regarding cutinases secretion in the medium, partition behaviour and extraction yields in the ATPS. The proteins studied were cutinase wild type and two fusion proteins of cutinase with the tryptophane-proline (WP) fusion tags, namely (WP)(2) and (WP)(4). The (WP)(4) fusion protein enabled a 300-fold increase of the cutinase partition coefficient when comparing to the wild type. However, the secretion of the fusion proteins was lower than of the wild type cutinase secretion. A batch extraction strategy was compared with a continuous extraction in a perforated rotating disc contactor (PRDC). The batch and continuous systems were loaded with as much as 60% (w/w) whole cultivation broth. The continuous extraction strategy provided a 2.5 higher separation capacity than the batch extraction strategy. Considering the integrated process, the cutinase-(WP)(2) proved to lead to the highest product activity, enabling five and six times more product activity than the wild type and the (WP)(4) fusion proteins, respectively.