Heavy metal accumulation in rice (Oryza sativa) near electronic waste dumps and related human health risk assessment

This research was conducted to assess heavy metal contamination in the environment and within Oryza sativa. The translocation factors (TFs) and bioaccumulation factors (BAFs) for heavy metals in O. sativa and estimated daily intake (EDI) and health risk index (HRI) were measured. The samples were analyzed for heavy metals using inductively coupled plasma optical emission spectrometry (ICP-OES). Pb and Cr concentrations in water samples within and near the electronic-waste dumping area exceeded water quality standards for surface water sources from the Pollution Control Department in the Ministry of Natural Resources and Environment of Thailand (PCD). The Pb concentration in soil samples within the area also exceeded soil quality standards for habitat and agriculture from PCD. Most of the metals were highly concentrated in roots, except for Mn which has the highest concentration in leaves. Pb concentrations in rice grains exceeded the FAO/WHO standard (0.2 mg/kg). The average TF values for heavy metals from the soil to roots, roots to stems, stems to leaves, and stems to grains were Mn > Pb > Ni > Cr, Mn > Cr > Ni > Pb, Ni > Pb > Mn > Cr, and Pb > Ni > Cr > Mn, respectively. The average BAF values in O. sativa were Mn > Ni > Pb > Cr. The EDI for Cr, Pb, Mn, and Ni via O. sativa consumption were 6.19, 6.02, 370.57, and 3.80 µg/kg/day, respectively. The HRI for Cr, Pb, Mn, and Ni via O. sativa consumption were 0.30, 1.50, 2.60, and 0.002, respectively.     

Monitoring the natural attenuation of a sewage sludge toxicity using the Allium cepa test

Appropriate final disposal of sewage sludge (SS) generated by wastewater treatment plants (WWTP) has been considered a serious environmental problem, but also a viable alternative to be applied in agriculture, once SS is rich in organic matter and nutrients. However, SS can be a source of contamination of several toxic agents. Therefore, its use in agriculture requires special care to avoid possible damage to the environment and exposed organisms. Detoxification of toxic wastes can be performed using the monitored natural attenuation, which involves biological, physical and chemical processes that frequently occur in the environment. This study aimed to assess the feasibility of decontaminating SS after different periods of monitored natural attenuation. To this end, samples of SS and associations of soil/SS with proportions of 10, 25 and 50% SS were buried for 0, 2, 6 and 12 months in holes prepared in a place free of contamination. Allium cepa was used as an indicator to assess the efficiency of the natural attenuation process. According to chemical analysis, the SS samples presented a high concentration of m- and p-cresol, especially for samples analyzed after 0 or 2 months of natural attenuation. The microorganisms present in the SS belonged to 17 different genera of bacteria, which varied in the microbial composition among samples. Both, raw SS and aqueous SS extracts induced DNA damage in A. cepa, even when associated with soil. However, this effect was observed to decline during the attenuation period, although significant effects were detected for the highest tested concentration (100% SS) even at the end of this process. These results thus indicated the necessity of applying a stabilization process associating SS and soil for a period of at least 12 months and showed that the studied raw SS is not a viable material for use as a soil reconditioner, even after natural attenuation. A. cepa test proved to be a useful tool to assess the efficiency of SS detoxification process. Therefore, we suggest that the application of SS in agriculture should be approached with caution and that the SS must be previously submitted to methodologies that evaluate its toxic potential.     

Use of Lethal Control to Reduce Habituation to Blank Rounds by Scavenging Birds

Abstract Scavenging bird deterrence frequently fails due to habituation. We demonstrated such habituation by gulls and corvids to blank rounds used in a dawn-to-dusk regime at a landfill site in southern England. We then combined blank rounds with live rounds and shot birds whenever they attempted to land. Gull numbers declined significantly despite only 1.9% of the population being shot. Corvid numbers returned to precontrol levels despite 52.7% of the population being shot. We suggest that shooting reduces gull habituation to blank rounds but is ineffective at reducing habituation by corvids.     

A hybrid anaerobic solid-liquid bioreactor for food waste digestion

A hybrid anaerobic solid-liquid (HASL) bioreactor is an enhanced two-phase anaerobic system, that consists of a solid waste reactor as the acidification reactor and a wastewater reactor, i.e. an upflow anaerobic sludge blanket (UASB) reactor as the methanogenic reactor. Food waste digestion in HASL bioreactors with pre-acidification and HASL operation stages was investigated in two separate runs. After 8 days of pre-acidification in Run A and 4 days in Run B, total volatile fatty acid (TVFA) and chemical oxygen demand (COD) concentrations in the leachates of both acidification reactors were similar. During HASL operation stage, TVFA and COD removal in the methanogenic phase were 77–100% and 75–95%, respectively. Some 99% of the total methane generated was from the methanogenic phase with a content of 68–70% methane. At the end of operation, about 59–60% of the added volatile solids (VS) were removed with a methane yield of 0.25 l g^–1 VS.     

Use of textile waste water along with liquid NPK fertilizer for production of wheat on saline sodic soils

A field experiment in collaboration with a private textile industry (Noor Fatima Fabrics Private (Ltd.), Faisalabad) was conducted to evaluate the effect of disposed water from bleaching unit, printing unit and end drain for improving growth and yield of wheat under saline sodic soil. Textile waste water along with canal water (control) was applied with and without liquid NPK fertilizer. The application of liquid NPK fertilizer with end drain waste water increased plant height, spike length, flag leaf length, root length, number of tillers (m^?2), number of fertile tillers (m^?2), 1000 grain weight, grain yield, straw yield and biological yield up to 21, 20, 20, 44, 17, 20, 14, 44, 40 and 41%, respectively compared to canal water (control). Similarly, the NPK uptake in grain was increased up to 15, 30 and 28%, respectively by liquid fertilizer treated end drain water as compare to canal water with liquid fertilizer. Moreover, concentration of different heavy metals particularly Cu, Cr, Pb and Cd was decreased in grains by application of waste water along with liquid NPK. The result may imply that waste water application along with liquid-NPK could be a novel approach for improving growth and yield of wheat in saline sodic soils.     

Extended Producer Responsibility in Thailand

Waste electrical and electronic equipment (WEEE) sheds light on the dimmer side of production and consumption patterns in modern societies. The rapid increase in its quantity and complexity contribute to the challenges it poses to solid waste management systems. Several members of the Organisation for Economic Co‐operation and Development (OECD) have relied on the principle of extended producer responsibility (EPR) to tackle the issue, with varying degrees of success. Several non‐OECD countries, including Thailand, are now developing WEEE programs and are looking for lessons from these first movers. This case study aims to provide an understanding both of this context and of the EPR program for WEEE proposed for Thailand. It finds that EPR mechanisms in general, and the proposed buy‐back system financed by product fees in Thailand in particular, have a strong potential to consolidate WEEE collection for the formal recycling sector by offering end users monetary incentives. On the negative side, this is an expensive combination of policy instruments, and the institutional design of the governmental fund is rigid. The policy proposal also contains no mechanism for product redesign—one of the objectives in the national WEEE strategy. This article suggests that the effectiveness of the policy might benefit from more flexibility at the compliance scheme level, in order to lessen the monopoly of the governmental fund, as well as the introduction of differentiated fees to promote environmentally friendly products.     

Comparison of Different Standard Methods to Evaluate the Total Concentrations of Heavy Metals in Waste Rock

The mining industry is a very rapidly increasing production sector in Finland. Many new mines have been opened recently and others are in the planning phase. Mining legislation has been recently revised and compilation of an ID-directive (Industrial Emission Directive, 2010) required to implement environmental law revision is in progress. The aim of this study was to compare different digestion methods recommended by the Finnish Environmental Administration for threshold and guideline value determinations in the Finnish PIMA Decree (214/2007) and Government Decree (591/2006) concerning recovery of certain wastes in earth construction. Altogether six methods were tested, of which five were microwave-assisted acid digestion methods: ISO 11466, EPA Method 3051A (aqua region), EPA Method 3051A (HNO₃), EPA Method 3051A (HNO₃/HCl), and SFS-EN 13656, while one was a fusion method with lithium tetraborate (ASTM C 1391 - 95). The results showed that concentrations of heavy metals (As, Cd, Co, Cu, Ni, Pb, Sb, V, and Zn) can be determined reproducibly with standard methods, but the chemical method used can have a significant impact on the results. This conclusion is very important, because the measured heavy metal values can affect the classification and processing of waste materials, and thereby can significantly impact the cost of treatment.     

From Life Cycle Assessment to Life Cycle Management

Life cycle assessment (LCA) is a widely accepted methodology to support decision‐making processes in which one compares alternatives, and that helps prevent shifting of environmental burdens along the value chain or among impact categories. According to regulation in the European Union (EU), the movement of waste needs to be reduced and, if unavoidable, the environmental gain from a specific waste treatment option requiring transport must be larger than the losses arising from transport. The EU explicitly recommends the use of LCA or life cycle thinking for the formulation of new waste management plans. In the last two revisions of the Industrial Waste Management Programme of Catalonia (PROGRIC), the use of a life cycle thinking approach to waste policy was mandated. In this article we explain the process developed to arrive at practical life cycle management (LCM) from what started as an LCA project. LCM principles we have labeled the “3/3” principle or the “good enough is best” principle were found to be essential to obtain simplified models that are easy to understand for legislators and industries, useful in waste management regulation, and, ultimately, feasible. In this article, we present the four models of options for the management of waste solvent to be addressed under Catalan industrial waste management regulation. All involved actors concluded that the models are sufficiently robust, are easy to apply, and accomplish the aim of limiting the transport of waste outside Catalonia, according to the principles of proximity and sufficiency.