Testing for Validity and Reliability in Cross-Cultural Research

A set of procedures is offered for assessing interraler reliability and certain aspects of validity of codes in cross-cultural studies. The method assumes that at least two independent raters have coded more than one trait. Each trait coded by one rater is correlated with each trait coded by a second, and all the codings by a single rater are intercorrelated with each other. The results are presented in a multitrait-multi-rater matrix. From this matrix it is possible to determine the interrater reliability and discriminant validity of trails in addition to a higher order concept based on pairs of traits.     

Predicting vegetative inoculum performance to maximize phytase production in solid-state fermentation using response surface methodology

Microbial phytase is used to reduce the environmental loading of phosphorus from animal production facilities. The limiting factors in the use of this enzyme in animal feeds can be overcome by solid-state fermentation (SSF), which is a promising technology for commercial enzyme production with lower production costs. Inoculum quality and the influence of inoculum quality on phytase production are important factors which need in-depth investigation before scaling-up of high-yielding fermentation process. A full factorial experimental design for 240 h with sampling at every 24 h was used to determine the effects of the treatments, inoculum age (plate and liquid culture), media composition and the duration of SSF on the production of fungal biomass and phytase in SSF systems using Aspergillus niger. The optimal treatment combination for maximal phytase production was determined by statistically comparing all treatments at each sampling time. Both 7- and 14-day plate cultures and M1+ medium composition with 72-h-old liquid inoculum treatments resulted in optimal phytase production at 144 h of SSF, which was the shortest duration observed for maximal phytase production. This resulted in maximal phytase production with a mean of 884±121 U/g substrate, while the maximal phytase production observed at 216 h of SSF (mean phytase activity of 1008±121 U/g substrate), with the same treatment combinations, was not statistically significant from that at 144 h of SSF. Phytase production was strongly growth-associated with younger inocula. The significant treatment variables, age of liquid inoculum and the duration of SSF, were used to predict the system response for phytase production using response surface methodology. From the response surface model, the optimal response of the experiment was predicted and the reliability of the prediction was checked with the verification experiment. Journal of Industrial Microbiology & Biotechnology (2001) 26, 161–170. Received 06 June 2000/ Accepted in revised form 14 October 2000     

Externally attached radio transmitters do not affect the parental care behaviour of rock bass

Turning, pectoral fin and caudal fin rates and time spent on the nest of male rock bass Ambloplites rupestris , engaged in parental care, were not affected after the attachment of external radio transmitters. Reproductive success was similar between treatment and control fish. Micro external radio transmitters can be used on small fishes for studying parental care duration and post-care movement without altering their behaviour.     

Values,Errors, and Precautions

In the environmental health literature, errors in interpreting studies or data are not infrequent. Many are of the Type II variety. Common solecisms of this type are: treating the criterion of p < 0.05 as a sacrament; demanding complete confounder control; arguing for the existence of phantom confounders; arguing that the effect size is trivial; building nonveridical models; arguing for no effect from inadequate sample size; demanding causal proof; arguing that causality is reversed; conducting a ballot of published studies. These are examined in this paper.     

Search for novel proteolytic enzymes aimed at textile and agro-industrial applications: An overview of current and novel approaches

The types and sources of proteolytic enzymes, enzyme assays, strategies for fermentation yield improvement, and novel proteases and their applications in industrial sectors are widely covered in this review. We give a special focus on alkaline proteases for the textile and detergent industries, as well as for the degradation of keratin-rich wastes.     

Optimization of pancreatic lipase inhibition by Cudrania tricuspidata fruits using response surface methodology

The fruits of Cudrania tricuspidata (Carr.) Bur. (Moraceae) significantly inhibited pancreatic lipase, which plays a key role in fat absorption. Optimization of extraction conditions with minimum pancreatic lipase activity and maximum yield was determined using response surface methodology with three-level-three-factor Box–Behnken design (BBD). Regression analysis showed a good fit of the experimental data and the optimal condition was obtained as ethanol concentration, 74.5%; temperature 61.9 °C and extraction time, 13.5 h. The pancreatic lipase activity and extraction yield under optimal conditions were found to be 65.5% and 54.0%, respectively, which were well matched with the predicted value of 65.8% and 47.1%. Further fractionation of C. tricuspidata extract resulted in the isolation of compound 1, which was identified as 5,7,4′-trihydroxy-6,8-diprenylisoflavone. It inhibited pancreatic lipase activity with IC₅₀ value of 65.0 μM. HPLC analysis suggested positive correlation between pancreatic lipase inhibition and 5,7,4′-trihydroxy-6,8-diprenylisoflavone of C. tricuspidata fruits.     

Transferring sediment containing intact seed banks: a method for studying plant community ecology

The experimental study of the ecology of natural plant communities is necessary to demonstrate the effects of environmental factors on plant growth. It allows one to make predictions of the likely effects of environmental changes on plant communities. Manipulating an entire ecosystem is complicated, and is rarely attempted. An alternative method is applied here for the submerged plant communities of the seasonally-flooded oligohaline marshes of the Camargue. It consists of collecting undisturbed sediment samples with their contained intact seed bank, and submitting them to different salinities. The study of total biomass and of the biomass of the more frequent species was carried out using parametric tests. The precision of the results depended on the frequency of the species in the replicates. When the frequency was low, non-parametric statistics were necessary. The method seems to be particularly suitable for the study of communities of annual species in aquatic environments.

---

Résumé L'étude expérimentale de l'écologie des communautés naturelles de plantes est nécessaire pour démontrer les relations de cause à effet entre les facteurs environnementaux et l'abondance des plantes. Elle l'est également pour faire des prédictions réalistes sur les effets de modifications envisagées de l'environnement sur des communautés de plantes. La manipulation de l'écosystème complet est complexe, ce qui rend son utilisation rare. Une méthode alternative a été utilisée pour l'étude de la composition spécifique des communautés de plantes submergées des marais temporaires de Camargue. Elle consiste à prélever des échantillons non perturbés de sédiment, avec leur stock de semences intact, et à les soumettre à des conditions de salinité. L'étude de la biomasse totale et de la biomasse des espèces les plus fréquentes est faite au moyen de test paramétriques. La précision attendue des résultats dépend de la fréquence de l'espèce dans les réplicats. Lorsque la fréquence n'est pas élevée l'emploi de statistiques non paramétriques est indispensable. La méthode se révéle particulièrement bien adaptée à l'étude des communautés d'annuelles en milieu aquatique.

     

Modelling minirhizotron observations to test experimental procedures

In order to help design experiments with minirhizotrons or interpret data from such experiments, a modelling approach is a valuable tool to complement empirical approaches. The general principle of this modelling approach is to calculate and to study the part of a theoretical root system that is intersected by passes through a virtual minirhizotron tube (modelled here as a cylinder). Various outputs can be calculated from this part of the root system, and related to the surrounding root system which is perfectly known, since it has been simulated and stored in a data structure. Therefore, the method involves two levels of modelling that are presented and discussed: the root system architecture of a crop, and the observations that can be achieved with minirhizotron tubes. Illustrations of the method are presented to study the effect of several factors on the rooting depth curves, and to show how images may be calculated to mimic what can actually be viewed from inside the tube. These first results show that the maximum rooting depth curves, as virtually observed in the minirhizotron tube, present large variations and strongly underestimate the maximum rooting depth of the modelled root system (up to 60 cm in average). The underestimation is still more critical when the radius of the tube is lower than 3 cm, and when the tube is close to the vertical (angle lower than 0.2 rad). The use of the 0.9 quantile instead of the average value, for each of the observation dates, leads to a better estimation of the maximum rooting depth.     

Screening of lipid high producing mutant from rhodotorula glutinis by low ion implantation and study on optimization of fermentation medium

In order to obtain lipid producing strain with high-yield, the wild type stain Rhodotorula glutinis was treated by low ion implantation, and optimization of fermentation medium for higher lipid yield was carried out using mutant strain. It was found that the strain had a higher positive mutation rate when the output power was 10 keV and the dose of N⁺ implantation was 80 × 2.6 × 10¹³ ions/cm². Then a high-yield mutant strain D30 was obtained through cid-heating coupling ultrasonic method and lipid yield was 3.10 g/L. Additionally, the surface response method was used to optimize fermentation medium. The three significant factors (glucose, peptone, KH₂PO₄) were optimized using response surface methodology (RSM), and the optimized parameters of fermentation medium were as follows: glucose 73.40 g/L, peptone 1.06 g/L and KH₂PO₄ 3.56 g/L. Finally the fermentation characteristic of high-yield mutation strain D30 was studied, when fermentation time was 10 days, which lipid yield increased to 7.81 g/L. Fatty acid composition of the lipid was determined by GC, and the most represented fatty acids of mutant D30 were C16:0 (11.4 %), C16:1 (5.66 %), C18:1 (49.3 %), and C18:2 (27.0 %).