Study of Saharan dust influence on PM10 measures in Sicily from 2013 to 2015

Nowadays, particulate matter, especially that with small dimension as PM₁₀, PM_2.5 and PM_1, is the air quality indicator most commonly associated with a number of adverse health effects. In this paper it is analyzed the impact that a natural event, such as the transport of Saharan dust, can have on increasing the particulate matter concentration in Sicily.Consulting the data of daily PM₁₀ concentration, acquired by air quality monitoring network belonging to “Agenzia Regionale Protezionedell’ Ambiente” (Environmental Protection Regional Agency), it was possible to analyze the trend from 2013 to 2015. The days, in which the limit value was exceeded, were subjected to combined analysis. It was based on three models: interpretations of the air masses back-trajectories, using the atmospheric model HYSPLIT (HYbrid Single-Particle Lagrangian Integrated trajectory); on the calculation of the concentration on the ground and at high altitude particulate applying DREAM model (Dust REgional atmospheric model) and on the calculation of the concentration of mineral aerosols according to the atmospheric optical thickness (AOT) applying NAAPS model (Navy Aerosol Analysis and Prediction System).The daily limit value exceedances were attributed to the transport of Saharan dust events exclusively when the three models were in agreement with each other. Identifying the natural events, it was possible to quantify the contribution of the Saharan dust and consequently the reduction of the exceedances number. To quantify the contribution of Saharan dust on daily PM₁₀ concentration, it was calculated the regional background in according to precautionary approach recommended by “Guidance on the quantification of the contribution of natural sources under the EU Air Quality Directive 2008/50/EC”, when the application of the method cannot be validated with chemical analysis, as in this case. In this study is obtained, as the most important quantitative goal, the convergence of the three models to the same result. So, is evident that exceedances of the daily limit value that occurred from 2013 to 2015 in Sicily can be attributed, in most cases, to the Saharan dust intrusion.     

A biomechanical study of the relationship between running velocity and three-dimensional lumbosacral kinetics

Faster running is not performed with proportional increase in all joint torque/work exertions. Although previous studies have investigated lumbopelvic kinetics for a single velocity, it is unclear whether each lumbopelvic torque should increase for faster running. We examined the relationship between running velocity and lumbopelvic kinetics. We calculated the three-dimensional lumbosacral kinetics of 10 male sprinters during steady-state running on a temporary indoor running track at five target velocities: 3.0 (3.20 ± 0.16), 4.5 (4.38 ± 0.18), 6.0 (5.69 ± 0.47), 7.5 (7.30 ± 0.41), and maximal sprinting (9.27 ± 0.36 m/s). The lumbosacral axial rotation torque increased more markedly (from 0.37 ± 0.06 to 1.99 ± 0.46 Nm/kg) than the extension and lateral flexion torques. The increase in the axial rotation torque was larger above 7.30 m/s. Conversely, the extension and lateral flexion torques plateaued when running velocity increased above 7.30 m/s. Similar results were observed for mechanical work. The results indicate that faster running required larger lumbosacral axial rotation torque. Conversely, the extension and lateral flexion torques were relatively invariant to running velocity above 7 m/s, implying that faster running below 7 m/s might increase the biomechanical loads causing excessive pelvic posterior tilt and excessive pelvic drop which has the potential to cause pain/injury related to lumbopelvic extensors and lateral flexors, whereas these biomechanical loads might not relate with running velocity above 7 m/s.     

Cloning of the replication region on the bacteriocinogenic plasmid pRJ9 of Staphylococcus aureus

Abstract A 5.8-kb Cla I fragment of pRJ9, a bacteriocinogenic plasmid of Sphylococcus aureus , was cloned in the unique Cla I site of pRJ5. The recombinant plasmid obtained, pRJ23, failed to confer bacteriocin production and immunity to bacteriocin on host cells. The cloned fragment was shown to contain the complete replicon of pRJ9. Attempts to clone the 4.4-kb Cla I fragment of pRJ9 were unsuccessful, apparently due to the inactivation of the basic replicon of the cloning vector. Therefore, plasmid pRJ5 cut at its Cla I site appears to be a suitable vector for cloning replication regions of plasmids that cab replicate in S. aureus .     

The cellular pathway of photosynthate transfer in the developing wheat grain. II. A structural analysis and histochemical studies of the pathway from the crease phloem to the endosperm cavity

In the developing wheat grain, photosynthate is transferred longitudinally along the crease phloem and then laterally into the endosperm cavity through the crease vascular parenchyma, pigment strand and nucellar projection. In order to clarify this cellular pathway of photosynthate unloading, and hence the controlling mechanism of grain filling, the potential for symplastic and apoplastic transfer was examined through structural and histochemical studies on these tissue types. It was found that cells in the crease region from the phloem to the nucellar projection are interconnected by numerous plasmodesmata and have dense cytoplasm with abundant mitochondria. Histochemical studies confirmed that, at the stage of grain development studied, an apoplastic barrier exists in the cell walls of the pigment strand. This barrier is composed of lignin, phenolics and suberin. The potential capacity for symplastic transfer, determined by measuring plasmodesmatal frequencies and computing potential sucrose fluxes through these plasmodesmata, indicated that there is sufficient plasmodesmatal cross-sectional area to support symplastic unloading of photosynthate at the rate required for normal grain growth. The potential capacity for membrane transport of sucrose to the apoplast was assessed by measuring plasma membrane surface areas of the various cell types and computing potential plasma membrane fluxes of sucrose. These fluxes indicated that the combined plasma membrane surface areas of the sieve element–companion cell (se–cc) complexes, vascular parenchyma and pigment strand are not sufficient to allow sucrose transfer to the apoplast at the observed rates. In contrast, the wall ingrowths of the transfer cells in the nucellar projection amplify the membrane surface area up to 22-fold, supporting the observed rates of sucrose transfer into the endosperm cavity. We conclude that photosynthate moves via the symplast from the se–cc complexes to the nucellar projection transfer cells, from where it is transferred across the plasma membrane into the endosperm cavity. The apoplastic barrier in the pigment strand is considered to restrict solute movement to the symplast and block apoplastic solute exchange between maternal and embryonic tissues. The implications of this cellular pathway in relation to the control of photosynthate transfer in the developing grain are discussed.     

Molecular phylogeny and systematics of Genista (Leguminosae) and related genera based on nucleotide sequences of nrDNA (ITS region) and cpDNA (trnL-trnF intergenic spacer)

Phylogenetic relationships of Genista and related genera (Teline, Chamaespartium, Pterospartum, Echinospartum, Ulex, Stauracanthus and Retama) were assessed by the analysis of sequences of the nrDNA internal transcribed spacer (ITS region), and the cpDNA trnL-trnF intergenic spacer. The tree obtained by combining both sets of data indicates the existence of three lines of diversification within Genista, that correspond to three subgenera: Genista, Phyllobotrys and Spartocarpus, however, each of these lineages encompass also species of the related genera Echinospartum, Teline, Retama, Chamaespartium, Pterospartum, Ulex, Stauracanthus. The molecular data do not support division of these subgenera into taxonomical units at the sectional level; only sections Genista and Spartocarpus are monophyletic groups. The sequences of both regions are also informative at the specific level, grouping morphologically related species (e.g. the G. cinerea aggregate). The molecular data have also helped to clarify the position of taxa whose relationships were not well established (e.g. G. valdes-bermejoi). The relationships of related genera that belong to the Genista lines of diversification have also been investigated. Echinospartum splits into two separate clades matching the separation of two ecological and caryological differentiated groups. Teline also forms two groups, both placed near to Genista subgenus Genista, but that separated from the main core of the group. Retama, morphologically well differentiated from Genista, is close to Genista subgenus Spartocarpus. Chamaespartium and Pterospartum do not form a monophyletic group. Chamaespartium is closer to Genista subgenus Genista, whereas Pterospartum stands close to: 1) Genista subgenus Spartocarpus (particularly, sect. Cephalospartum); and 2) the Ulex-Stauracanthus clade (a terminal derivative of Genista subgenus Spartocarpus). Cases of incongruence (e.g. Echinospartum, Chamaespartium, Teline) between the trees obtained from the two molecular markers, may be indicating hybridisation and/or introgression between different lines of Genisteae.     

Assessing regional sustainable development through an integration of nonlinear principal component analysis and Gram Schmidt orthogonalization

The regional sustainable development level (SDL), sustainability of regional development (SRD) and system coordination (SC) make up the triangular truss of regional sustainable development assessment, but it is debated how should traditional practice best weight and calculate the whole sustainable development system level. The Bohai Rim, covering three provinces and two municipalities in China, lies in a region that is sensitive to profound conflict between socioeconomic development and environment pollution in the process of sustainable development. Considering the defects of traditional models and the multidimensionality of regional sustainability issues, we proposed an integrated model of nonlinear principal component analysis and Gram Schmidt orthogonalization and presented a novel regional sustainable development assessment method and framework from three perspectives for the society–economy–environment system of the Bohai Rim region. The results show that: (a) the integration of nonlinear principal component analysis and Gram Schmidt orthogonalization can well remedy the defects of traditional methods and provide a more objective conceptual framework; (b) the sustainability of regional development and system coordination models graphically demonstrate the essence and connotation of a dynamic sustainable development system; (c) the empirical study demonstrated that the Bohai Rim region has experienced a distinct development period in which the SRD experienced a steady decline and the SDL and SC generally increased; (d) the coordination ability can be improved by a decline in the environmental sustainability, which reveals the importance of environment subsystem optimization; and (e) the weight distribution of variables demonstrates that the most significant factors affecting sustainable development are the indicators from the dimensions of people's standard of living, economic structure and environmental pollution. This study enriches the sustainable development assessment theory and methodology, and lays the foundation for further sustainable development research in the Bohai Rim region.