Leaf phenology mediates provenance differences in herbivore populations on valley oaks in a common garden

1. Plants from different populations often display a variation in herbivore resistance. However, it is rarely understood what plant traits mediate such differences. 2. It was tested how leaf phenology affects herbivore populations in a 15‐year‐old common garden of valley oaks (Quercus lobata Née) with different populations and maternal parents from throughout the Q. lobata range. 3. The abundance of leaf miners (Stigmella sp. Shrank) and leaf phenology of oaks in the common garden was measured. 4. Leaf miner abundance varied among provenance locations (population), but not among maternal parents within populations. Leaf phenology varied by provenance location and maternal parent, and trees that leafed out earlier accrued higher leaf‐miner abundance. Path analysis indicated that leaf phenology was the likely driver of provenance and parental differences in resistance to leaf miners. 5. Understanding population differences is particularly important when considering transport of genotypes for ornamental or restoration purposes. The present study suggests that similarity in leaf phenology may be one factor that could be used to find genotypes with a similar herbivore resistance to local genotypes.     

Potential for Powered Flight Neared by Most Close Avialan Relatives,but Few Crossed Its Thresholds

Media player

A novel Golgi mannosidase inhibitor: Molecular design,synthesis, enzyme inhibition,and inhibition of spheroid formation

Effective chemotherapy for solid cancers is challenging due to a limitation in permeation that prevents anticancer drugs from reaching the center of the tumor, therefore unable to limit cancer cell growth. To circumvent this issue, we planned to apply the drugs directly at the center by first collapsing the outer structure. For this, we focused on cell–cell communication (CCC) between N-glycans and proteins at the tumor cell surface. Mature N-glycans establish CCC; however, CCC is hindered when numerous immature N-glycans are present at the cell surface. Inhibition of Golgi mannosidases (GMs) results in the transport of immature N-glycans to the cell surface. This can be employed to disrupt CCC. Here, we describe the molecular design and synthesis of an improved GM inhibitor with a non-sugar mimic scaffold that was screened from a compound library. The synthesized compounds were tested for enzyme inhibition ability and inhibition of spheroid formation using cell-based methods. Most of the compounds designed and synthesized exhibited GM inhibition at the cellular level. Of those, AR524 had higher inhibitory activity than a known GM inhibitor, kifunensine. Moreover, AR524 inhibited spheroid formation of human malignant cells at low concentration (10 µM), based on the disruption of CCC by GM inhibition.     

Biomass estimation models and allocation patterns of 14 shrub species in Mountain Luya,Shanxi, China

Aims Shrub species have evolved specific strategies to regulate biomass allocation among various organs or between above- and belowground biomass and shrub biomass model is an important approach to estimate biomass allocation among different shrub species. This study was designed to establish the optimal estimation models for each organ (leaf, stem, and root), aboveground and total biomass of 14 common shrub species in Mountain Luya, Shanxi Province, China. Furthermore, we explored biomass allocation characteristics of these shrub species by using the index of leaf biomass fraction (leaf to total biomass), stem biomass fraction (stem to total biomass), root biomass fraction (root to total biomass), and root to shoot mass ratio (R/S) (belowground to aboveground biomass).
Methods We used plant height, basal diameter, canopy diameter and their combination as variables to establish the optimal biomass estimation models for each shrub species. In addition, we used the ratios of leaf, stem, root to total biomass, and belowground to aboveground biomass to explore the difference of biomass allocation patterns of 14 shrub species.
Important findings Most of biomass estimation models could be well expressed by the exponential and linear functions. Biomass for shorter shrub species with more stems could be better estimated by canopy area; biomass for taller shrub species with less stems could be better estimated by the sum of the square of total base diameter multiply stem height; and biomass for the rest shrub species could be better estimated by canopy volume. The averaged value for these shrub species was 0.61, 0.17, 0.48, and 0.35 for R/S, leaf biomass fraction, stem biomass fraction, and root biomass fraction, respectively. Except for leaf biomass fraction, R/S, stem biomass fraction, and root biomass fraction for shrubs with thorn was significantly greater than that for shrubs without thorn.     

Anti-adhesive Property of Maize Leaf Surface Related with Temperature and Humidity

The anti-adhesive surfaces have always aroused great interest of worldwide scientists and engineers.But in practical applications,it often faces the threat and impact of temperature and humidity.In this work,the excellent anti-adhesive performance of maize leaf under high temperature and humidity were investigated in detail.Firstly,the adhesion forces of the maize leaf surface under different temperature and humidity were measured by using Atomic Force Microscopy (AFM).The temperature of the substrate was varied between 23 ℃ to 100 ℃,and the ambient relative humidity is from 18％ to 100％.It was found that the adhesion force of maize leaf decreased with the increase of temperature and humidity.The mechanism of its excellent anti-adhesive performance of maize leaf under high temperature and relative humidity was revealed.The transverse and longitudinal ridges on maize leaf surface interlace with each other,forming small air pockets,which reduces the actual contact area between the object and the maize leaf.With the increase of humidity,the liquid film will be formed in the air pockets gradually and so much water vapor is produced with increase of temperature.Then the air flow rate increases though the wavy top of transverse ridges,inducing the dramatic decrease of adhesion force.Inspired by this mechanism,four samples with this bionic structure were made.This functional "biomimetic structure" would have potential value in the wide medical equipments such as high frequency electric knife with anti-adhesion surface under high temperature and high humidity.     

苹果炭疽叶枯病菌致病力分析及苹果种质抗病性鉴定

苹果炭疽叶枯病是由胶孢炭疽菌(Colletotrichum gloeosporioides)引起的一种真菌病害,现已上升为世界苹果生产中的主要病害之一。了解不同来源的苹果炭疽叶枯病菌致病力差异及明确苹果种质资源对苹果炭疽叶枯病的抗性,对品种选育、品种合理布局以及控制病害的流行具有重要的参考价值。本研究对不同来源的79株病原菌进行了室内致病力测定,获知该菌致病力差异明显,其中强致病力菌株所占比例大。同时,本研究也对327份苹果种质资源进行了室内抗病性鉴定,其中高抗资源160份,中抗资源6份,中感资源22份,高感资源139份。表明我国现保存的苹果种质资源中存在丰富抗病种质。进一步按苹果分类系统分析发现,抗病资源在当前栽培的主要品种群中均有分布,特别是红玉品种群、富士品种群抗病资源最为丰富。     

Methylation of KvDMR1 involved in regulating the imprinting of CDKN1C gene in cattle

The CDKN1C gene encodes a cyclin‐dependent kinase inhibitor and is one of the key genes involved in the development of Beckwith–Wiedemann syndrome and cancer. In this study, using a direct sequencing approach based on a single nucleotide polymorphism (SNP) at genomic DNA and cDNA levels, we show that CDKN1C exhibits monoallelic expression in all seven studied organs (heart, liver, spleen, lung, kidney, muscle and subcutaneous fat) in cattle. To investigate how methylation regulates imprinting of CDKN1C in cattle, allele‐specific methylation patterns in two putative differential methylation regions (DMRs), the CDKN1C DMR and KvDMR1, were analyzed in three tissues (liver, spleen and lung) using bisulfite sequencing PCR. Our results show that in the CDKN1C DMR both parental alleles were unmethylated in all three analyzed tissues. In contrast, KvDMR1 was differentially methylated between the two parental alleles in the same tissues. Statistical analysis showed that there is a significant difference in the methylation level between the two parental alleles (P < 0.01), confirming that this region is the DMR of KvDMR1 and that it may be correlated with CDKN1C imprinting.     

Evaluation of leaf features in forest trees: Methods,techniques, obtainable information and limits

Tree leaves are interfaces between the whole organism and the environment. Leaves display a series of attributes that are linked to specific functions (functional leaf traits—FLT) and/or show responses to biotic and abiotic stress factors (stress response traits, SRT), which can be subdivided into: (a) morphological traits; (b) chemical traits; (c) physiological traits; (d) symptoms. The analysis of FLT is a useful tool for tree species and provenance phenotyping, due to the adaptation of trees to environmental stress. Additionally, FLT can be used as response factor in long term and large spatial scales surveys of forest conditions. Despite these potential benefits of leaf traits in the assessment of ecosystem health and functioning, leaf sampling in forests is time-consuming and costly, especially in forests with a complex vertical and horizontal structure and in remote forest areas. Once a foliar sample has been collected, many different analyses can be carried out; however, analyses should be technically simple and able to be performed within one day following the leaf collection (i.e., on fresh samples), or after air-drying the leaves themselves (analysis of dried specimens). This paper reports the results of leaf sampling and foliar analyses carried out in previous research projects and revises the current state-of-the-art. The leaf traits that are easily obtainable from leaf sampling are listed, together with the operational procedures necessary for their measurement, described in a standardized protocol. Their ecological and functional relevance is discussed in relation to their potential information (as indicators of climatic stress, drought, air and soil pollution, tree light-use and competition, plant nutritional status, health and general plant stress conditions). Finally, this review provides suggestions for the elaboration and reporting of data, and proposes some guidelines to improve the effectiveness of foliar analysis in the assessment of forest ecosystem health, properties and functioning.     

Photosynthesis of herbaceous plants from nutrient-poor tropical forests

Photosynthetic characteristics, specific leaf mass, chlorophyll and total leaf nitrogen concentrations of four herbaceous plants (Dicranopteris linearis, Hanguana malayana, Pentaphragma ellipticum, Tacca integrifolia) from nutrient-poor tropical forests showed that all these plants were well-adapted to their natural growth environments. No photoinhibition was observed even in the understorey plants. This revised version was published online in June 2006 with corrections to the Cover Date.