Trehalose and dry dipalmitoylphosphatidylcholine revisited

Dry mixtures of sonicated vesicles of DPPC and trehalose which contained a maximum of 0.2 mol water/mol lipid were examined by differential scanning calorimetry, Fourier transform infrared spectroscopy and freeze-fracture electron microscopy. Samples of dry DPPC and trehalose prepared from aqueous solution had a minimum T_m of 24°C for the gel to liquid-crystalline transition provided that the vesicles were dried with trehalose while the lipid was in liquid-crystalline phase. This low transition is compared to a transition of 105–112°C for dry pure DPPC and of 42°C for hydrated pure DPPC. The present work is an extension of earlier work from this laboratory using both other lipids and other methods of preparation.     

Structures similar to lipid emulsions and liposomes. Dipalmitoylphosphatidylcholine,cholesterol, Tween 20–Span 20 or Tween 80–Span 80 in aqueous media

In the present work, we show that we obtained nanometric structures made of water, 1,2-dipalmitoyl-sn-glycero-3-phosphatidylcholine (DPPC), cholesterol (Chol), and a mixture of ethoxylated and non-ethoxylated sorbitan fatty acid esters (Tween 20, Span 20, Tween 80, and Span 80) by mixing all of them near the cloud point temperature (cp) of the ethoxylated surfactant. The influence that the constituents had on the size of the particle was determined by a pseudo-ternary phase diagram of water/Tween–Span/DPPC–Chol; the colloidal particles obtained were studied by differential scanning calorimetry, confocal fluorescence microscopy, scanning electron microscopy, and atomic force microscopy. These studies were made for all the systems with at least 23 d of colloidal stability. The most stable system was obtained with the Tween 80–Span 80 pair, behaving as a typical suspension for 48 d; this system was made of water, Tween 80–Span 80 (80:20), DPPC–Chol (95:5) in a corresponding molar ratio of 48:37:100:10. The colloidal particles obtained were a kind of emulsion and liposome structures. The second stable system was obtained with the same mixture, but in a molar ratio of 8:6:9:0, its structure was also a kind of emulsion particles. In both systems and in other less stable ones, the “emulsion particle” was completely new, it structurally corresponds to a nucleus of mixed micelles surrounded by at least one bilayer of DPPC.     

A guide to crossing peas

Diagrams feature prominently in science education, and there has been an increase in research focusing on students’ use of them in knowledge construction. This paper reports on an investigation into first year university students’ perceptions of scale and size at the cellular level. It was found that many students appeared to tacitly assume that textbook diagrams presented cellular components in true relative size, leading to widespread interpretative problems with regard to scale and absolute size. The paper includes recommendations for textbook designers and classroom practitioners.     

BetaDock: Shape-Priority Docking Method Based on Beta-Complex

Abstract

This paper presents an approach and a software, BetaDock, to the docking problem by putting the priority on shape complementarity between a receptor and a ligand. The approach is based on the theory of the β-complex. Given the Voronoi diagram of the receptor whose topology is stored in the quasi-triangulation, the β-complex corresponding to water molecule is computed. Then, the boundary of the β-complex defines the β-shape which has the complete proximity information among all atoms on the receptor boundary. From the β-shape, we first compute pockets where the ligand may bind. Then, we quickly place the ligand within each pocket by solving the singular value decomposition problem and the assignment problem. Using the conformations of the ligands within the pockets as the initial solutions, we run the genetic algorithm to find the optimal solution for the docking problem. The performance of the proposed algorithm was verified through a benchmark test and showed that BetaDock is superior to a popular docking software AutoDock 4.     

InteractiVenn: a web-based tool for the analysis of sets through Venn diagrams

Background

Set comparisons permeate a large number of data analysis workflows, in particular workflows in biological sciences. Venn diagrams are frequently employed for such analysis but current tools are limited.

Results

We have developed InteractiVenn, a more flexible tool for interacting with Venn diagrams including up to six sets. It offers a clean interface for Venn diagram construction and enables analysis of set unions while preserving the shape of the diagram. Set unions are useful to reveal differences and similarities among sets and may be guided in our tool by a tree or by a list of set unions. The tool also allows obtaining subsets’ elements, saving and loading sets for further analyses, and exporting the diagram in vector and image formats. InteractiVenn has been used to analyze two biological datasets, but it may serve set analysis in a broad range of domains.

Conclusions

InteractiVenn allows set unions in Venn diagrams to be explored thoroughly, by consequence extending the ability to analyze combinations of sets with additional observations, yielded by novel interactions between joined sets. InteractiVenn is freely available online at: www.interactivenn.net.     

不同生境三种杜鹃属植物花特征比较

生境影响植物花部特征的分化.为探究不同人为干扰强度生境是否影响杜鹃花特征分化和资源分配,以及不同颜色杜鹃花分布情况,该研究以百里杜鹃保护区高、中、低人为干扰强度生境的马缨杜鹃、迷人杜鹃和露珠杜鹃为实验材料,采用五点取样法统计不同生境杜鹃花的植株数量,游标卡尺测量花部特征,光学显微镜统计花粉数,海洋光谱仪测定花色的反射光...     

VoroMQA: Assessment of protein structure quality using interatomic contact areas

In the absence of experimentally determined protein structure many biological questions can be addressed using computational structural models. However, the utility of protein structural models depends on their quality. Therefore, the estimation of the quality of predicted structures is an important problem. One of the approaches to this problem is the use of knowledge‐based statistical potentials. Such methods typically rely on the statistics of distances and angles of residue‐residue or atom‐atom interactions collected from experimentally determined structures. Here, we present VoroMQA (Voronoi tessellation‐based Model Quality Assessment), a new method for the estimation of protein structure quality. Our method combines the idea of statistical potentials with the use of interatomic contact areas instead of distances. Contact areas, derived using Voronoi tessellation of protein structure, are used to describe and seamlessly integrate both explicit interactions between protein atoms and implicit interactions of protein atoms with solvent. VoroMQA produces scores at atomic, residue, and global levels, all in the fixed range from 0 to 1. The method was tested on the CASP data and compared to several other single‐model quality assessment methods. VoroMQA showed strong performance in the recognition of the native structure and in the structural model selection tests, thus demonstrating the efficacy of interatomic contact areas in estimating protein structure quality. The software implementation of VoroMQA is freely available as a standalone application and as a web server at http://bioinformatics.lt/software/voromqa . Proteins 2017; 85:1131–1145. © 2017 Wiley Periodicals, Inc.     

Pyrazole amino acids: hydrogen bonding directed conformations of 3‐amino‐1H‐pyrazole‐5‐carboxylic acid residue

A series of model compounds containing 3‐amino‐1H‐pyrazole‐5‐carboxylic acid residue with N‐terminal amide/urethane and C‐terminal amide/hydrazide/ester groups were investigated by using NMR, Fourier transform infrared, and single‐crystal X‐ray diffraction methods, additionally supported by theoretical calculations. The studies demonstrate that the most preferred is the extended conformation with torsion angles ? and ψ close to ±180°. The studied 1H‐pyrazole with N‐terminal amide/urethane and C‐terminal amide/hydrazide groups solely adopts this energetically favored conformation confirming rigidity of that structural motif. However, when the C‐terminal ester group is present, the second conformation with torsion angles ? and ψ close to ±180° and 0°, respectively, is accessible. The conformational equilibrium is observed in NMR and Fourier transform infrared studies in solution in polar environment as well as in the crystal structures of other related compounds. The observed conformational preferences are clearly related to the presence of intramolecular interactions formed within the studied residue. Copyright © 2017 European Peptide Society and John Wiley & Sons, Ltd.     

Models of development for blowfly sister species Chrysomya chloropyga and Chrysomya putoria

Abstract Developmental curves for the sister species Chrysomya chloropyga (Wiedemann, 1818) and Chrysomya putoria (Wiedemann, 1830) (Diptera: Calliphoridae) were established at eight and 10 different constant temperatures, respectively, using developmental landmarks and body length as measures of age. The thermal summation constants (K) and developmental threshold (D₀) were calculated for five developmental landmarks using a previously described method. Isomorphen and isomegalen diagrams were also constructed for the purpose of estimating postmortem intervals (PMIs). Chrysomya chloropyga had an average developmental threshold value (D₀) of 10.91 °C (standard error [SE] = 0.94 °C, n = 5), significantly lower than that of C. putoria (13.42 °C, SE = 0.45 °C, n = 5) (paired t‐test: t = ? 4.63, d.f. = 8, P < 0.00). Similarly, K values for C. chloropyga were larger than those for C. putoria for all developmental events except onset of the wandering phase. These are the first data that can be used to calculate minimum PMIs and predict population growth of C. chloropyga and C. putoria in Africa; the data indicate that developmental data for one of these species cannot be used as surrogate data for the sister species.