Structure based design of novel 6,5 heterobicyclic mitogen-activated protein kinase kinase (MEK) inhibitors leading to the discovery of imidazo[1,5-a] pyrazine G-479

Use of the tools of SBDD including crystallography led to the discovery of novel and potent 6,5 heterobicyclic MEKi’s [J. Med. Chem. 2012, 55, 4594]. The core change from a 5,6 heterobicycle to a 6,5 heterobicycle was driven by the desire for increased structural diversity and aided by the co-crystal structure of G-925 [J. Med. Chem. 2012, 55, 4594]. The key design feature was the shift of the attachment of the five-membered heterocyclic ring towards the B ring while maintaining the key hydroxamate and anilino pharamcophoric elements in a remarkably similar position as in G-925. From modelling, changing the connection point of the five membered ring heterocycle placed the H-bond accepting nitrogen within a good distance and angle to the Ser212 [J. Med. Chem. 2012, 55, 4594]. The resulting novel 6,5 benzoisothiazole MEKi G-155 exhibited improved potency versus aza-benzofurans G-925 and G-963 but was a potent inhibitor of cytochrome P450’s 2C9 and 2C19. Lowering the log D by switching to the more polar imidazo[1,5-a] pyridine core significantly diminished 2C9/2C19 inhibition while retaining potency. The imidazo[1,5-a] pyridine G-868 exhibited increased potency versus the starting point for this work (aza-benzofuran G-925) leading to deprioritization of the azabenzofurans. The 6,5-imidazo[1,5-a] pyridine scaffold was further diversified by incorporating a nitrogen at the 7 position to give the imidazo[1,5-a] pyrazine scaffold. The introduction of the C7 nitrogen was driven by the desire to improve metabolic stability by blocking metabolism at the C7 and C8 positions (particularly the HLM stability). It was found that improving on G-868 (later renamed GDC-0623) required combining C7 nitrogen with a diol hydroxamate to give G-479. G-479 with polarity distributed throughout the molecule was improved over G-868 in many aspects.     

Structures similar to lipid emulsions and liposomes. Dipalmitoylphosphatidylcholine,cholesterol, Tween 20–Span 20 or Tween 80–Span 80 in aqueous media

In the present work, we show that we obtained nanometric structures made of water, 1,2-dipalmitoyl-sn-glycero-3-phosphatidylcholine (DPPC), cholesterol (Chol), and a mixture of ethoxylated and non-ethoxylated sorbitan fatty acid esters (Tween 20, Span 20, Tween 80, and Span 80) by mixing all of them near the cloud point temperature (cp) of the ethoxylated surfactant. The influence that the constituents had on the size of the particle was determined by a pseudo-ternary phase diagram of water/Tween–Span/DPPC–Chol; the colloidal particles obtained were studied by differential scanning calorimetry, confocal fluorescence microscopy, scanning electron microscopy, and atomic force microscopy. These studies were made for all the systems with at least 23 d of colloidal stability. The most stable system was obtained with the Tween 80–Span 80 pair, behaving as a typical suspension for 48 d; this system was made of water, Tween 80–Span 80 (80:20), DPPC–Chol (95:5) in a corresponding molar ratio of 48:37:100:10. The colloidal particles obtained were a kind of emulsion and liposome structures. The second stable system was obtained with the same mixture, but in a molar ratio of 8:6:9:0, its structure was also a kind of emulsion particles. In both systems and in other less stable ones, the “emulsion particle” was completely new, it structurally corresponds to a nucleus of mixed micelles surrounded by at least one bilayer of DPPC.     

NEW RECORD OF PIONOPSIS,TIPHYINAE, WITH DESCRIPTIONS OF TWO NEW SPECIES IN CHINESE WATER MITE FAUNA (ACARI: HYGROBATOIDEA: PIONIDAE)*

Abstract Two new species of water mites, Pionopsis (s.s.)longicosta sp. nov. and Pionopsis (s.s.) zhaoi sp. nov. are described in the present paper. This is the first record of the genus of the subfamily Tiphyinae in the family Pionidae from China.     

Intracellular Development of Enterocytozoon, A Unique Microsporidian Found in the Intestine of AIDS Patients

Enterocytozoon was 1st described in 1985, in an AIDS patient with intestinal malabsorption and diarrhea. Since then, additional cases of infection with this organism have been observed, but only in individuals with AIDS and malabsorption. Intestinal tissue biopsies were obtained from a 45-year-old man prior to AIDS diagnosis, again nine months later and then at autopsy two months later. When the biopsies were examined electron microscopically, both sets contained the microsporidian parasite. However, the 2nd intestinal biopsy, when wasting was much more severe, contained infection in almost every small intestinal enterocyte examined. The parasite was actively developing, allowing us to detail its life cycle. The parasite is apansporoblastic, polysporous and has characteristics not previously reported in the Microsporida: (1) an electron lucent inclusion not usually seen in Microsporida is prominent and always present; (2) extremely elongated sausage-shaped nuclei occur in the proliferative phase of parasite development; (3) the polar tube development uniquely involves the production of electron dense discs, yet results in the formation of a typical spore; and (4) polar tube development occurs prior to the final division of the multi-nucleate sporont. On the basis of these characteristics, we are placing this genus in a new family, Enterocytozoonidae, n. fam.     

西藏锐顶天牛属一新种（鞘翅目：天牛科）

本记述锐顶天牛属一新种，即墨脱锐颚天牛Cleptometopus motuoensis sp．nov．。模式标本保存于西南农业大学植保系昆虫标本馆。     

New and poorly known Cenozoic clown beetle compressions from France (Insecta: Coleoptera: Histeridae)

Summary

Two French fossil Histeridae are described or revised, viz. Hister cerestensis n. sp. from the Oligocene of Céreste (Lubéron) and Plegaderus pitoni (Theobald, 1935), n. comb. from the Pliocene of Chambon Lake (Puy-de-Dôme). Morphometric data are used to compare fossil and extant taxa, with multivariate statistics. A list of the fossil Histeridae is given.     

Preparation and Evaluation of Differently Sulfonated Styrene–Divinylbenzene Cross-linked Copolymer Cationic Exchange Resins as Novel Carriers for Drug Delivery

The differently sulfonated styrene–divinylbenzene cross-linked copolymer cationic exchange resins were prepared by oil-in-water polymerization and varied degrees of sulfonation. Several characteristics of the obtained resins were evaluated, i.e., Fourier transform infrared spectra, the ion-exchange capacity, microscopic morphology, size, and swelling. The resin characteristics were altered in relation to the degree of sulfonation, proving that differently sulfonated resins could be prepared. The behavior of chlorpheniramine (CPM) loading and in vitro release in the USP simulated gastric (SGF) and intestinal fluids (SIF) of the obtained resins were also evaluated. The CPM loaded in the resinates (drug-loaded resins) increased with the increasing degree of sulfonic group and hence the drug binding site in the employed resins. The CPM release was lower from the resins with the higher degree of sulfonic group due to the increase in the diffusive path depth. The CPM release was obviously lower in SGF than SIF because CPM, a weak base drug, ionized to a greater extent in SGF and then preferred binding with rather than releasing from the resins. In conclusion, the differently sulfonated resins could be utilized as novel carriers for drug delivery.     

Biological behavior of the curcumin incorporated chitosan/poly(vinyl alcohol) nanofibers for biomedical applications

Electrospun composite scaffolds show high ability to be used in regenerative medicine and drug delivery, due to the nanofibrous structure and high surface area to volume ratio. In this study, we used nanofibrous scaffolds fabricated by chitosan (CS), poly(vinyl alcohol) (PVA), carbopol, and polycaprolactone using a dual electrospinning technique while curcumin (Cur) incorporated inside of the CS/PVA fibers. Scaffolds were fully characterized via scanning electron microscopy, water contact angle, tensile measurement, hydration, protein adsorption, and wrinkled tests. Furthermore, viability of the buccal fat pad-derived mesenchymal stem cells (BFP-MSCs) was also investigated using MTT assay for up to 14 days while cultured on these scaffolds. Cell cycle assay was also performed to more detailed evaluation of the stem cells growth when grown on scaffolds (with and without Cur) compared with the culture plate. Results demonstrated that Cur loaded nanofibrous scaffold had more suitable capability for water absorption and mechanical properties compared with the scaffold without Cur and it could also support the stem cells viability and proliferation. Cur release profile showed a decreasing effect on BFP-MSCs viability in the initial stage, but it showed a positive effect on stem cell viability in a long-term manner. In general, the results indicated that this nanofibrous scaffold has great potential as a delivery of the Cur and BFP-MSCs simultaneously, and so holds the promising potential for use in various regenerative medicine applications.