Modeling WEPP erodibility parameters in calcareous soils in northwest Iran

Modeling soil detachment rates at the regional scale is important for better understanding of the processes of erosion and the development of erosion models. Soil erodibility is an important factor for predicting soil loss, but its direct measurement at the watershed scale is difficult, time-consuming and costly. This study used stepwise multiple-linear regression (MLR) and artificial neural networks (ANNs) to model Water Erosion Prediction Project (WEPP) soil erodibility parameters, including the baseline inter-rill erodibility (K_ib), baseline rill erodibility (K_rb) and critical shear stress (τ_cb) of cropland conditions in calcareous soils of northwest Iran. Simulated inter-rill and rill erosion experiments were conducted at 100 locations with three replications. K_ib, K_rb and τ_cb and basic soil properties were measured at each location. Auxiliary variables related to soil erodibility were derived from a Landsat 7 satellite image and a 30 m × 30 m digital elevation model (DEM). MLR and ANN models were employed to predict K_ib, K_rb and τ_cb using two groups of input variables: i) more easily measurable basic soil properties (pedo-transfer functions (PTFs)) and ii) more easily measurable basic soil properties and auxiliary data (soil spatial prediction functions (SSPFs)). The results indicated that the WEPP models performed poorly in comparison to the derived models. PTFs and SSPFs generated from ANN models provided more reliable predictions than the MLR models. ANN-based SSPF models yielded the best results (with the highest R² and lowest RMSE values) for predicting Kib and Krb. ANN-based PTF model performed reasonably well for predicting τ_cb. These results show that information from terrain attributes and remote sensing data are potential auxiliary variables for improving prediction of soil erodibility parameters.     

Root tensile strength and root distribution of typical Mediterranean plant species and their contribution to soil shear strength

In Mediterranean environments, gully erosion is responsible for large soil losses. It has since long been recognized that slopes under vegetation are much more resistant to soil erosion processes compared to bare soils and improve slope stability. Planting or preserving vegetation in areas vulnerable to erosion is therefore considered to be a very effective soil erosion control measure. Re-vegetation strategies for erosion control rely in most cases on the effects of the above-ground biomass in reducing water erosion rates, whereas the role of the below-ground biomass is often neglected or underestimated. While the above-ground biomass can temporally disappear in semi-arid environments, roots may still be present underground and play an important role in protecting the topsoil from being eroded. In order to evaluate the potential of plant species growing in Mediterranean environments to prevent shallow mass movements on gully or terrace walls, the root reinforcement effect of 25 typical Mediterranean matorral species (i.e. shrubs, grasses herbs, small trees) was assessed, using the simple perpendicular model of Wu et al. (Can Geotech J 16:19–33, 1979). As little information is available on Mediterranean plant root characteristics, root distribution data were collected in SE-Spain and root tensile strength tests were conducted in the laboratory. The power root tensile strength–root diameter relationships depend on plant species. The results show that the shrubs Salsola genistoides Juss. Ex Poir. and Atriplex halimus L. have the strongest roots, followed by the grass Brachypodium retusum (Pers.) Beauv. The shrubs Nerium oleander L. and the grass Avenula bromoides (Gouan) H. Scholz have the weakest roots in tension. Root area ratio for the 0–0.1 m topsoil ranges from 0.08% for the grass Piptatherum miliaceum (L.) Coss to 0.8% for the tree Tamarix canariensis Willd. The rush Juncus acutus L. provides the maximum soil reinforcement to the topsoil by its roots (i.e. 304 kPa). Grasses also increase soil shear strength significantly (up to 244 kPa in the 0–0.1 m topsoil for Brachypodium retusum (Pers.) Beauv.). The shrubs Retama sphaerocarpa (L.) Boiss. and Anthyllis cytisoides L. are increasing soil shear strength to a large extent as well (up to 134 and 160 kPa respectively in the 0–0.10 m topsoil). Whereas grasses and the rush Juncus acutus L. increase soil shear strength in the topsoil (0–0.10 m) to a large extent, the shrubs Anthyllis cytisoides (L.), Retama sphaerocarpa (L.) Boiss., Salsola genistoides Juss. Ex Poir. and Atriplex halimus L. strongly reinforce the soil to a greater depth (0–0.5 m). As other studies reported that Wu’s model overestimates root cohesion values, reported root cohesion values in this study are maximum values. Nevertheless, the calculated cohesion values are used to rank species according to their potential to reinforce the soil.     

沉积物再悬浮对浮游藻类影响的模拟实验研究

作为浅水湖泊的重要特性之一,由风浪等动力作用引起的沉积物再悬浮对浮游藻类的初级生产力、群落结构具有重要意义。本研究通过生长季节(5-6月)在太湖梅梁湾湖岸的中宇宙模拟实验,比较在同样的外源负荷下浮游藻类对不同的沉积物再悬浮程度的影响特征,以及其主要的影响因子。实验在约250L的大桶中进行,通过位于沉积物-水界面的水泵的动力作用,模拟了三个不同程度沉积物再悬浮:无再悬浮即对照、弱悬浮和强悬浮程度。实验结果显示:(1)对照、弱悬浮和强悬浮之间悬浮物浓度呈显著性梯度变化,平均值分别为5、30、40 mg L-1,水下20cm光密度分别为表面光密度的80%、35%和25%。TN和TP在悬浮处理组显著高于对照组,但是弱悬浮和强悬浮之间差异不显著。生物可利用的各种溶解性营养盐形式对再悬浮的响应特征不明显。(2)浮游藻类生物量和群落结构对再悬浮的响应显著。对照组的Chla在整个实验阶段都很低,强悬浮组和弱悬浮组的平均Chla分别5倍和2倍于对照组。实验初始浮游藻类群落种类多样性低,优势种群主要为隐藻(隐藻属Cryptomonas spp.和蓝隐藻Chroomonas acuta)。再悬浮处理显著促进了隐藻的生长,但弱悬浮和强悬浮之间差异不显著。对照组优势种群演替为微小型种类蓝隐藻和绿藻门的纤维藻属(Ankistrodesmus sp.)。(3)以相对丰度为统计数据,浮游动物群落结构对再悬浮的响应显著,弱悬浮和强悬浮之间差异不显著。对照组的枝角类大型种类溞属(Daphnia spp.)丰度显著高于再悬浮处理组,枝角类小型种类象鼻溞属(Bosmina spp.)和网纹溞属(Ceriodaphnia spp.)、轮虫丰度则呈相反趋势。可见,再悬浮促进了沉积物营养盐的释放和水下光照的衰减,还影响了浮游动物的群落结构,使其向摄食藻类能力较差的种类演替,从而在上行(bottom-up)和下行(top-down)两个方面影响了浮游藻类的现存量和群落结构。     

Similar temperature responses suggest future climate warming will not alter partitioning between denitrification and anammox in temperate marine sediments

Removal of biologically available nitrogen (N) by the microbially mediated processes denitrification and anaerobic ammonium oxidation (anammox) affects ecosystem N availability. Although few studies have examined temperature responses of denitrification and anammox, previous work suggests that denitrification could become more important than anammox in response to climate warming. To test this hypothesis, we determined whether temperature responses of denitrification and anammox differed in shelf and estuarine sediments from coastal Rhode Island over a seasonal cycle. The influence of temperature and organic C availability was further assessed in a 12‐week laboratory microcosm experiment. Temperature responses, as characterized by thermal optima (T_opt) and apparent activation energy (E_a), were determined by measuring potential rates of denitrification and anammox at 31 discrete temperatures ranging from 3 to 59 °C. With a few exceptions, T_opt and E_a of denitrification and anammox did not differ in Rhode Island sediments over the seasonal cycle. In microcosm sediments, E_a was somewhat lower for anammox compared to denitrification across all treatments. However, T_opt did not differ between processes, and neither E_a nor T_opt changed with warming or carbon addition. Thus, the two processes behaved similarly in terms of temperature responses, and these responses were not influenced by warming. This led us to reject the hypothesis that anammox is more cold‐adapted than denitrification in our study system. Overall, our study suggests that temperature responses of both processes can be accurately modeled for temperate regions in the future using a single set of parameters, which are likely not to change over the next century as a result of predicted climate warming. We further conclude that climate warming will not directly alter the partitioning of N flow through anammox and denitrification.     

降雨和汇流对黑土区坡面土壤侵蚀的影响试验研究

东北黑土区上坡汇流对坡面土壤侵蚀有重要影响,因此辨析降雨和汇流对黑土区坡面土壤侵蚀的影响对农田土壤侵蚀防治有重要意义。通过设计不同降雨强度和汇流速率以及二者组合的模拟降雨及上方汇流试验,分析了降雨和汇流对黑土坡面侵蚀的影响及其贡献。试验处理包括两个降雨强度(50 mm/h和100 mm/h)、两个汇流速率(50 mm/h和100 mm/h,即:10 L/min和20 L/min)、以及4种不同降雨强度和汇流速率的组合((50+50)mm/h、(50+100)mm/h、(100+50)mm/h和(100+100)mm/h)。结果表明,在50 mm/h和100 mm/h上方汇流引起的坡面侵蚀量仅分别是50 mm/h和100 mm/h降雨引起坡面侵蚀量的1.9%和0.6%;当降雨强度和坡上方汇流速率分别由50 mm/h增加至100 mm/h时,降雨试验处理下的坡面侵蚀量增加6.1倍,汇流试验处理下的坡面侵蚀量增加3.2倍,说明降雨对坡面土壤侵蚀的影响显著大于汇流的作用。在降雨和汇流组合试验中,总供水强度(降雨强度+汇流速率)为150 mm/h时,降雨强度为100 mm/h和汇流速率为50 mm/h组合试验的坡面侵蚀量是降雨强度为50 mm/h和汇流速率为100 mm/h组合试验坡面侵蚀量的7.9倍。在相同汇流条件下,降雨强度由50 mm/h增加到100 mm/h时,降雨强度的增加对坡面侵蚀量的贡献率为89.6%-99.5%;而在相同降雨条件下,坡面汇流速率由50 mm/h增加100 mm/h时,汇流速率的增加对坡面侵蚀量的贡献率为17.2%-78.7%,说明在东北黑土区防治坡面汇流对坡面土壤侵蚀影响也尤为重要。     

Enhancing the performance of hazard indexes in assessing hot spots of harbour areas by considering hydrodynamic parameters

The hazard assessment strategies for harbour areas usually rely on tools able to predict environmental threats posed by contaminated sediments, mostly based on biological and chemical parameters and distinctly less on hydrological factors. Although ports are considered semi-enclosed and low-energy systems with scarce capacity to disperse contaminants to the open sea, the hydrological pattern established within the port basin cannot be neglected, especially when the localisation of hot spots is required for clean-up and remediation actions. In the present study we considered both approaches (biological/chemical and hydrological) for assessing hot spots of harbour areas. In particular, the relationship between the sediment hazard assessment c_NWAC (cumulative Normalized and Weighted Average Concentration) index (which is based on chemical and biological data) and a properly selected hydrodynamic parameter (the bottom shear stress) of the port area was investigated. This study demonstrates that marine currents influence significantly the fine-grained fraction distribution of the surficial sediments, and thus, the spatial and temporal variability of contaminant concentration. The evaluation of hydrodynamic parameters enhances the performance of hazard tools in the localization of areas of most concern and thus a detailed knowledge of the hydrodynamic features of the port seabed is advisable before defining a proper characterisation strategy for the harbour area.     

乳山湾东流区沉积物中不同形态磷的分布特征

对2003年8月在乳山湾东流区采集的沉积物样品中的不同形态磷的平面和垂直分布特征进行了分析,并探讨了这些磷的形态分布与贝类养殖的关系,结果表明,不同形态磷在贝类高密度养殖区含量大于低密度养殖区.养殖区的垂直分布比较复杂,在1～20cm范围含量均出现较大波动,这与贝类养殖活动有关.Fe-P、Al-P含量出现较大波动还与污染程度有关,Or-P还与浮游植物活动有关.养殖区Ex-P、Fe-P、NAIP占TP的平均百分含量大于非养殖区,De-P、Oc-P恰好相反.Ca-P是乳山湾沉积物中含量最高的磷形态,Fe-P 和Or-P是最主要的两种生物可获得磷.TP、Or-P含量在养殖区与非养殖区之间没有显著差异,养殖区Fe-P含量高于非养殖区,3种磷的平均含量一般大于其它海区.非生物可获得磷约占TP的60%左右.     

Sulfide induces phosphate release from polyphosphate in cultures of a marine Beggiatoa strain

Sulfur bacteria such as Beggiatoa or Thiomargarita have a particularly high capacity for storage because of their large size. In addition to sulfur and nitrate, these bacteria also store phosphorus in the form of polyphosphate. Thiomargarita namibiensis has been shown to release phosphate from internally stored polyphosphate in pulses creating steep peaks of phosphate in the sediment and thereby inducing the precipitation of phosphorus-rich minerals. Large sulfur bacteria populate sediments at the sites of recent phosphorite formation and are found as fossils in ancient phosphorite deposits. Therefore, it can be assumed that this physiology contributes to the removal of bioavailable phosphorus from the marine system and thus is important for the global phosphorus cycle. We investigated under defined laboratory conditions which parameters stimulate the decomposition of polyphosphate and the release of phosphate in a marine Beggiatoa strain. Initially, we tested phosphate release in response to anoxia and high concentrations of acetate, because acetate is described as the relevant stimulus for phosphate release in activated sludge. To our surprise, the Beggiatoa strain did not release phosphate in response to this treatment. Instead, we could clearly show that increasing sulfide concentrations and anoxia resulted in a decomposition of polyphosphate. This physiological reaction is a yet unknown mode of bacterial polyphosphate usage and provides a new explanation for high phosphate concentrations in sulfidic marine sediments.