Effects of acupuncture on declined cerebral blood flow,impaired mitochondrial respiratory function and oxidative stress in multi-infarct dementia rats

Brain energy disorders and oxidative stress due to chronic hypoperfusion were considered to be the major risk factors in the pathogenesis of dementia. In previous studies, we have demonstrated that acupuncture treatment improved cognitive function of VaD patients and multi-infarct dementia (MID) rats. Acupuncture therapy also increased the activities of glycometabolic enzymes in the brain. But it is not clear whether acupuncture treatment compensates neuronal energy deficit after cerebral ischemic through enhancing the activities of glucose metabolic enzymes and preserving mitochondrial function, and whether acupuncture neuroprotective effect is associated with activations of mitochondrial antioxidative defense system. So, the effect of acupuncture therapy on cognitive function, cerebral blood flow (CBF), mitochondrial respiratory function and oxidative stress in the brain of MID rats was investigated in this study. The results showed that acupuncture treatment significantly improved cognitive abilities and increased regional CBF of MID rats. Acupuncture elevated the activities of total SOD, CuZnSOD and MnSOD, decreased the level of malondialdehyde (MDA) and superoxide anion, regulated the ratio of reduced glutathione (GSH) and oxidized glutathione (GSSG) in mitochondria, and raised the level of the respiratory control index (RCI) and P/O ratio and the activities of mitochondrial respiratory enzymes of MID rats. These results indicated that acupuncture treatment improved cognitive function of MID rats; and this improvement might be due to increased CBF, which ameliorated mitochondrial dysfunction induced by ischemia and endogenous oxidative stress system of brain.     

Effect of magnesium on the growth and cell cycle of transformed and non-transformed epithelial rat liver cells in vitro

The effects of magnesium (Mg) restriction on cell growth and the cell cycle were determined in transformed (TRL-8) and non-transformed (TRL-12-15) epithelial-like rat liver cells. Cells were cultured in RPMI 1640 medium in which the Mg concentration was reduced to 0.5, 0.1, and 0 × the concentration in the regular RPMI 1640 media (100mg/l). Cell growth in the transformed cells was not influenced by the Mg restriction as greatly as in the non-transformed cell line. Transit through the cell cycle also exhibited an independence of the Mg in the medium in the transformed cells. When transformed cells were grown for two generations in Mg-limited medium, the growth rate slowed to a rate similar to that demonstrated by the non-transformed cells. Analysis by flow cytometry showed that transit through the cell cycle was minimally slowed in Mg deficient transformed cells; however, transit through the G₁ and S phases in the non-transformed cells was slowed. The TRL-8 cells in Mg-limited medium resulted in fewer nuclei in G₁ with subsequent increases in the percentages of S-phase nuclei. The TRL 12-15 cells reacted oppositely with the number of G₁ nuclei increased and the number of S-phase nuclei decreased. In respect to growth, these results show that epithelial cells respond in a similar manner to Mg-limitation as do fibroblast cells. The transformed cells exhibited a level of independence from Mg in respect to growth, reproduction, and cell-cycle kinetics.     

Study of accumulation behaviour of tungsten based composite using electron probe micro analyser for the application in bone tissue engineering

In this research, a proto-type study we have conducted, where we have synthesized tungsten based composite materials which are tungsten along with combined oxides of other elements like calcium, scandium, barium, and aluminium in the form of powder with bones powder of mice devised by high energy ball mill and later on fabricating high dense pellets by sintering by spark plasma. The particle sizes of the composite materials are found to be 1–2 µm, as evidenced by the electron microscope, suggesting synthesized materials are of micron size. The quantitative and qualitative analysis of sintered pellets are well confirmed by electron probe micro analyzer (EPMA) and energy dispersive X-ray spectrometer (EDS) which illustrate the greater percentage of tungsten presents in the profound scan areas with other elements of the composite. The absence of pores across the 3D geometry suggesting dense sample, which is quite revealed by the X-ray tomography inspection. The prepared sintered pellets from the tungsten based composites are found to be ≈ 99.5% density with the observation of tungsten to be accumulated uniformly across the scan regions along with focussed hot spots as implied by EPMA. This study paves the way, to examine how the tungsten accumulation and the distribution with the other elements for future understanding in bone tissue engineering application and the in vivo specification of tungsten.     

Boundary layer properties of highly dissected leaves: an investigation using an electrochemical fluid tunnel

Abstract. A method for modelling heat and mass transfer by diffusion-controlled electrode reactions in a fluid tunnel is described. In this procedure, a nickelplated leaf functions as a test electrode, and the convective transfer of ions to the leaf cathode in an electrolyte-filled flow tunnel is measured as a function of flow rate. The method permits the simulation of water vapour and heat transfer, and in particular, the determination of boundary layer conductances, by analogy with observed ion transfer. The approach is applicable to many problems in modelling heat and mass transfer between leaves and their surroundings, and is especially useful in examining the properties of leaves in which surface characteristics or overall shape are complex. Using this method, the properties of the highly dissected leaves of Achillea lanulosa with regard to forced convection were investigated. The leaves showed high transfer conductances, indicating that the effective unit of heat transfer was probably the individual leaf subelements. Conductances tended to be greater and effective characteristic dimensions smaller for the larger, more open leaves of a lower altitude population in contrast with leaves from high altitude plants. While the results provide insight into the properties of these complex leaf shapes, difficulties in interpreting the findings are discussed, and a number of exploratory approaches are suggested for data analysis and interpretation.     

Computer modeling of substrate binding to lipases from Rhizomucor miehei, Humicola lanuginosa, and Candida rugosa.

The substrate-binding sites of the triacyl glyceride lipases from Rhizomucor miehei, Humicola lanuginosa, and Candida rugosa were studied by means of computer modeling methods. The space around the active site was mapped by different probes. These calculations suggested 2 separate regions within the binding site. One region showed high affinity for aliphatic groups, whereas the other region was hydrophilic. The aliphatic site should be a binding cavity for fatty acid chains. Water molecules are required for the hydrolysis of the acyl enzyme, but are probably not readily accessible in the hydrophobic interface, in which lipases are acting. Therefore, the hydrophilic site should be important for the hydrolytic activity of the enzyme. Lipases from R. miehei and H. lanuginosa are excellent catalysts for enantioselective resolutions of many secondary alcohols. We used molecular mechanics and dynamics calculations of enzyme-substrate transition-state complexes, which provided information about molecular interactions important for the enantioselectivities of these reactions.     

Combination of dual-energy computed tomography and iterative metal artefact reduction to increase general quality of imaging for radiotherapy patients with high dense materials. Phantom study

PurposeTo evaluate the use of pseudo-monoenergetic reconstructions (PMR) from dual-energy computed tomography, combined with the iterative metal artefact reduction (iMAR) method.MethodsPseudo-monoenergetic CT images were obtained using the dual-energy mode on the Siemens Somatom Definition AS scanner. A range of PMR combinations (70–130 keV) were used with and without iMAR. A Virtual Water™ phantom was used for quantitative assessment of error in the presence of high density materials: titanium, alloys 330 and 600. The absolute values of CT number differences (AD) and normalised standard deviations (NSD) were calculated for different phantom positions. Image quality was assessed using an anthropomorphic pelvic phantom with an embedded hip prosthesis. Image quality was scored blindly by five observers.ResultsAD and NSD values revealed differences in CT number errors between tested sets. AD and NSD were reduced in the vicinity of metal for images with iMAR (p < 0.001 for AD/NSD). For ROIs away from metal, with and without iMAR, 70 keV PMR and pCT AD values were lower than for the other reconstructions (p = 0.039). Similarly, iMAR NSD values measured away from metal were lower for 130 keV and 70 keV PMR (p = 0.002). Image quality scores were higher for 70 keV and 130 keV PMR with iMAR (p = 0.034).ConclusionThe use of 70 keV PMR with iMAR allows for significant metal artefact reduction and low CT number errors observed in the vicinity of dense materials. It is therefore an attractive alternative to high keV imaging when imaging patients with metallic implants, especially in the context of radiotherapy planning.     

Evaluating regional water security through a freshwater ecosystem service flow model: A case study in Beijing-Tianjian-Hebei region,China

Freshwater ecosystem service is essential to human’s survival and development. Many studies have documented the spatial differences in the supply and demand of ecosystem services and proposed the concept of ecosystem services flows. However, few studies characterize freshwater ecosystem service flow quantitatively. Therefore, our paper aims to quantify the effects of freshwater ecosystem service flow on downstream areas. We developed a freshwater ecosystem service flow model and applied it in the Beijing–Tianjin–Hebei (BTH) region, China, for the year of 2000, 2005, and 2010. We assessed the regional water security with an improved freshwater security index by integrating freshwater service provision, consumption and flow; and found that most areas of the BTH region (69.2%) were affected by upstream freshwater flows. The areas achieving water security in the region also expanded to 66.9%, 66.1%, and 71.3%, which were 6.4%, 6.8% and 5.7% increments compared to no-flow situation, in 2000, 2005 and 2010, respectively. Setting quota for human water consumption is suggested to further improve water security. These results highlight the need to fully understand the connections between distant freshwater ecosystem service provision and local freshwater ecosystem service consumption. This approach may also help managers to choose more sustainable strategies for critical freshwater resource management across different regions.