Three-dimensional perfused cell culture

Compelling evidence suggests the limitation and shortcomings of the current and well established cell culture method using multi-well plates, flasks and Petri dishes. These are particularly important when cell functions are sensitive to the local microenvironment, cell–cell and cell–extracellular matrix interactions. There is a clear need for advanced cell culture systems which mimic in vivo and more physiological conditions. This review summarises and analyses recent progress in three dimensional (3D) cell culture with perfusion as the next generation cell culture tools, while excluding engineered tissue culture where three dimensional scaffold has to be used for structural support and perfusion for overcoming mass transfer control. Apart from research activities in academic community, product development in industry is also included in this review.     

Stimulation of tissue plasminogen activator production from epithelial cell lines

The aim of this study was to investigate the possibility of enhancing the yield of tissue plasminogen activator (tPA) from two epithelial cell lines of normal (non-malignant) derivation grown in tissue culture. The three agents used in this investigation were chosen because of their proven enhancing effect on analogous cells or products. The anabolic hormone stanozolol was found to have no significant stimulatory effect on these cell lines. A phorbol acetate (12-O-tetradecanoylphorbol 13-acetate) caused a twofold enhancement in tPA yield but the most significant results were obtained with 5-azacytidine. This agent increased the yield by up to fourfold in small stationary cultures and threefold in large-scale microcarrier cultures. A combination of azacytidine and phorbol acetate did not have an additive effect on total yield but did alter the kinetics of tPA expression with time. Indications were that the maximum yield with these types of potentiating agents was achieved as it could not be increased by using a combination of two different agents.     

Dynamic features of cells expressing macrophage properties in tissue cultures of dissociated cerebral cortex from the rat

Summary Two previously identified forms of macrophage were investigated in primary cultures of cerebral cortical cells. Dynamic features were revealed through time-lapse video recording and aspects of macrophage function were assessed. The two cell forms were shown to be different pre-mitotic stages of a single cell type. The cell cycle for these cells involved an initial large, flat, quiescent cell which retracted to yield a slightly rounded form with numerous processes. This latter form lost processes and developed profuse filopodia as it became very rounded just prior to division; both resulting daughter cells then regained the initial large flat appearance. These cells possessed several properties of macrophages, including phagocytosis, nucleoside diphosphatase enzyme, and CR3 receptors. These properties were transient, expressed just before and after mitosis, but subsequently down-regulated in the flat daughter cells. Because of this feature, it was difficult to determine the exact size of this cell population; however, the observed rate of proliferation suggests it may be substantial. It is suggested that these cells correspond to non-microglial macrophages of brain tissue and, because of their significant down-regulation, they may be difficult to detect. This may be important in studies of brain accessory immune cells in tissue culture.     

Field performance of micropropagated,macropropagated, and seed-derived propagules of three Eucalyptus grandis ortets

Tree size, survival, and coppicing of micropropagated plantlets, macropropagated cuttings, and seedlings of Eucalyptus grandis Hill ex Maiden were monitored through 57 months in a study in southern Florida to assess propagation options. Two plantlet lines developed by direct micropropagation and orchard open-pollinated seedlings from three ortets were compared in the main study. Rooted cuttings from up to four ramets of each of the three ortets and another ortet were examined in an adjacent supplemental study. Freezes at six and 16 months killed most initial and first-coppice stems to the ground. Most developmental differences in the main study were consistent from ages 2 to 57 months. Propagation by ortet interactions were observed beginning at 21 months, due to the poor performance of seedlings of one ortet after the second freeze. At 57 months, no differences in tree height, DBH, volume, or survival were detected between plantlet lines and between rooted cuttings and plantlets, but seedlings were inferior to plantlets and cuttings. Vegetative propagules had more uniform tree size at every age, with typically less than one-half the variability observed among seedlings. Even though plantlets and cuttings may be more expensive to produce, they have numerous advantages over seedlings for E. grandis plantation establishment in Florida.     

ECM Protein Nanofibers and Nanostructures Engineered Using Surface-initiated Assembly

The extracellular matrix (ECM) in tissues is synthesized and assembled by cells to form a 3D fibrillar, protein network with tightly regulated fiber diameter, composition and organization. In addition to providing structural support, the physical and chemical properties of the ECM play an important role in multiple cellular processes including adhesion, differentiation, and apoptosis. In vivo, the ECM is assembled by exposing cryptic self-assembly (fibrillogenesis) sites within proteins. This process varies for different proteins, but fibronectin (FN) fibrillogenesis is well-characterized and serves as a model system for cell-mediated ECM assembly. Specifically, cells use integrin receptors on the cell membrane to bind FN dimers and actomyosin-generated contractile forces to unfold and expose binding sites for assembly into insoluble fibers. This receptor-mediated process enables cells to assemble and organize the ECM from the cellular to tissue scales. Here, we present a method termed surface-initiated assembly (SIA), which recapitulates cell-mediated matrix assembly using protein-surface interactions to unfold ECM proteins and assemble them into insoluble fibers. First, ECM proteins are adsorbed onto a hydrophobic polydimethylsiloxane (PDMS) surface where they partially denature (unfold) and expose cryptic binding domains. The unfolded proteins are then transferred in well-defined micro- and nanopatterns through microcontact printing onto a thermally responsive poly(N-isopropylacrylamide) (PIPAAm) surface. Thermally-triggered dissolution of the PIPAAm leads to final assembly and release of insoluble ECM protein nanofibers and nanostructures with well-defined geometries. Complex architectures are possible by engineering defined patterns on the PDMS stamps used for microcontact printing. In addition to FN, the SIA process can be used with laminin, fibrinogen and collagens type I and IV to create multi-component ECM nanostructures. Thus, SIA can be used to engineer ECM protein-based materials with precise control over the protein composition, fiber geometry and scaffold architecture in order to recapitulate the structure and composition of the ECM in vivo.     

Ascorbic acid prolongs the viability and stability of isolated perfused lungs: A mechanistic study using 31P and hyperpolarized 13C nuclear magnetic resonance

Ex vivo lung perfusion (EVLP) has recently shown promise as a means of more accurately gauging the health of lung grafts and improving graft performance post-transplant. However, reperfusion of ischemic lung promotes the depletion of high-energy compounds and a progressive loss of normal mitochondrial function, and it remains unclear how and to what extent the EVLP approach contributes to this metabolic decline. Although ascorbate has been used to mitigate the effects of ischemia–reperfusion injury, the nature of its effects during EVLP are also not clear. To address these uncertainties, this study monitored the energy status of lungs during EVLP and after the administration of ascorbate using ³¹P and hyperpolarized ¹³C NMR (nuclear magnetic resonance). Our experiments demonstrated that the oxidative phosphorylation capacity and pyruvate dehydrogenase flux of lungs decline during ex vivo perfusion. The addition of ascorbate to the perfusate prolonged lung viability by 80% and increased the hyperpolarized ¹³C bicarbonate signal by a factor of 2.7. The effect of ascorbate is apparently due not to its antioxidant quality but rather to its ability to energize cellular respiration given that it increased the lung’s energy charge significantly, whereas other antioxidants (glutathione and α-lipoic acid) did not alter energy metabolism. During ascorbate administration, inhibition of mitochondrial complex I with rotenone depressed energy charge and shifted the metabolic state of the lung toward glycolysis; reenergizing the electron transport chain with TMPD (N,N,N',N'-tetramethyl-p-phenylenediamine) recovered metabolic activity. This indicates that ascorbate slows the decline of the ex vivo perfused lung’s mitochondrial activity through an independent interaction with the electron transport chain complexes.     

Cryogenic 3D printing for tissue engineering

We describe a new cryogenic 3D printing technology for freezing hydrogels, with a potential impact to tissue engineering. We show that complex frozen hydrogel structures can be generated when the 3D object is printed immersed in a liquid coolant (liquid nitrogen), whose upper surface is maintained at the same level as the highest deposited layer of the object. This novel approach ensures that the process of freezing is controlled precisely, and that already printed frozen layers remain at a constant temperature. We describe the device and present results which illustrate the potential of the new technology.     

Continuous bioprocessing: The real thing this time?: 10th Annual bioProcessUK Conference,December 3–4, 2013, London,UK

The Annual bioProcessUK Conference has acted as the key networking event for bioprocess scientists and engineers in the UK for the past 10 years. The following article is a report from the sessions that focused on continuous bioprocessing during the 10^th Annual bioProcessUK Conference (London, December 2013). These sessions were organized by the ‘EPSRC Centre for Innovative Manufacturing in Emergent Macromolecular Therapies’ hosted at University College London. A plenary lecture and workshop provided a forum for participants to debate topical issues in roundtable discussions with industry and academic experts from institutions such as Genzyme, Janssen, Novo Nordisk, Pfizer, Merck, GE Healthcare and University College London. The aim of these particular sessions was to understand better the challenges and opportunities for continuous bioprocessing in the bioprocessing sector.