MV-mimicking micelles loaded with PEG-serine-ACP nanoparticles to achieve biomimetic intra/extra fibrillar mineralization of collagen in vitro

Since their discovery, matrix vesicles (MVs) containing minerals have received considerable attention for their role in the mineralization of bone, dentin and calcified cartilage. Additionally, MVs' association with collagen fibrils, which serve as the scaffold for calcification in the organic matrix, has been repeatedly highlighted. The primary purpose of the present study was to establish a MVs–mimicking model (PEG-S-ACP/micelle) in vitro for studying the exact mechanism of MVs-mediated extra/intra fibrillar mineralization of collagen in vivo. In this study, high-concentration serine was used to stabilize the amorphous calcium phosphate (S-ACP), which was subsequently mixed with polyethylene glycol (PEG) to form PEG-S-ACP nanoparticles. The nanoparticles were loaded in the polysorbate 80 micelle through a micelle self-assembly process in an aqueous environment. This MVs–mimicking model is referred to as the PEG-S-ACP/micelle model. By adjusting the pH and surface tension of the PEG-S-ACP/micelle, two forms of minerals (crystalline mineral nodules and ACP nanoparticles) were released to achieve the extrafibrillar and intrafibrillar mineralization, respectively. This in vitro mineralization process reproduced the mineral nodules mediating in vivo extrafibrillar mineralization and provided key insights into a possible mechanism of biomineralization by which in vivo intrafibrillar mineralization could be induced by ACP nanoparticles released from MVs. Also, the PEG-S-ACP/micelle model provides a promising methodology to prepare mineralized collagen scaffolds for repairing bone defects in bone tissue engineering.     

Comparative morphology of the foliage leaf epidermis, with emphasis on papillae characters, in key taxa of woody bamboos of the Asian tropics (Poaceae: Bambusoideae)

The foliage leaf epidermis of 35 species representing 12 key genera of woody bamboos of the Asian tropics was investigated using light and scanning electron microscopy. The results indicated that papillae forms and distributional patterns around the stomatal apparatus of the abaxial foliage leaf epidermis were usually constant and were of great taxonomic significance at the specific and generic levels. However, papillae characters were not suitable for dividing subtribes within woody bamboos of the Asian tropics. On the basis of papillae characters, Schizostachyum s.s. and Cephalostachyum were confirmed, but their delimitations should be modified. The transfer of Leptocanna chinensis and Schizostachyum sanguineum into Cephalostachyum was supported, and Cephalostachyum virgatum and C .  pergracile were confirmed to be members of Schizostachyum s.s. The subtribe Racemobambosinae did not obtain support and Racemobambos appeared to be better placed in subtribe Bambusinae. Neomicrocalamus was supported as a close relative and better treated as a synonym of Racemobambos . Gigantochloa was closely related to Dendrocalamus .  © 2008 The Linnean Society of London, Botanical Journal of the Linnean Society , 2008, 156 , 411–423.     

CELL SURFACE ALTERATIONS BY TAXOL ASSOCIATED WITH ABNORMAL MORPHOGENESIS IN THE CHICK EMBRYO

The anticancer drug taxol brings about its biological effects by altering the stability of microtubules. We have examined the effects of taxol on early morphogenesis in chick embryos culturedin vitro. Taxol induced various abnormalities in the developing nervous system, heart and somites as well as general retardation of development. SEM studies revealed that taxol treatment leads to dramatic alterations in the embryonic cell surfaces. Time-course experiments demonstrated that the action of taxol is very rapid and becomes evident within a few minutes at the ultrastructural level. Taxol thus throws embryonic cell adhesion and motility out of balance. This appears to be the major cause of abnormal morphogenesis in taxol-treated embryos.     

Evaluation of four-dimensional cone beam computed tomography ventilation images acquired with two different linear accelerators at various gantry speeds using a deformable lung phantom

We evaluated four-dimensional cone beam computed tomography (4D-CBCT) ventilation images (VI_CBCT) acquired with two different linear accelerator systems at various gantry speeds using a deformable lung phantom.The 4D-CT and 4D-CBCT scans were performed using a computed tomography (CT) scanner, an X-ray volume imaging system (Elekta XVI) mounted in Versa HD, and an On-Board Imager (OBI) system mounted in TrueBeam. Intensity-based deformable image registration (DIR) was performed between peak-exhale and peak-inhale images. VI_CBCT- and 4D-CT-based ventilation images (VI_CT) were derived by DIR using two metrics: one based on the Jacobian determinant and one on changes in the Hounsfield unit (HU). Three different DIR regularization values (λ) were used for VI_CBCT. Correlations between the VI_CBCT and VI_CT values were evaluated using voxel-wise Spearman’s rank correlation coefficient (r).In case of both metrics, the Jacobian-based VI_CBCT with a gantry speed of 0.6 deg/sec in Versa HD showed the highest correlation for all the gantry speeds (e.g., λ = 0.05 and r = 0.68). Thus, the r value of the Jacobian-based VI_CBCT was greater or equal to that of the HU-based VI_CBCT. In addition, the ventilation accuracy of VI_CBCT increased at low gantry speeds.Thus, the image quality of VI_CBCT was affected by the change in gantry speed in both the imaging systems. Additionally, DIR regularization considerably influenced VI_CBCT in both the imaging systems. Our results have the potential to assist in designing CBCT protocols, incorporating VI_CBCT imaging into the functional avoidance planning process.     

Functional Casein-Poly saccharide Conjugates Prepared by Controlled Dry Heating

Casein was conjugated with dextran and galactomannan in a controlled dry state at a relative humidity of 79% and at 60°C for 24 hr. The covalent attachment of polysaccharides to casein was confirmed by SDS-PAGE and HPLC. The emulsifying activity of the casein-dextran and casein-galactomannan conjugates was 1.5 times higher than that of casein. The emulsion stability of the casein-dextran and casein-galactomannan conjugates was 10 times higher than that of casein. The improvement in these emulsifying properties reached a steady state when the conjugation of casein with polysaccharide was done for 24 hr in a controlled dry state, suggesting the rapid formation of conjugates through a Maillard reaction in the case of casein. Compared to commercial emulsifiers, the casein-polysaccharide conjugates showed better emulsifying properties in acidic and high-salt concentration systems.     

Aroid scarabs in the genus Peltonotus Burmeister (Coleoptera,Scarabaeidae, Dynastinae): key to species and new distributional data

The southeast Asian scarab beetle genus Peltonotus Burmeister (Scarabaeidae, Dynastinae, Cyclocephalini) is reviewed. New country records for Peltonotus morio Burmeister (Myanmar and Vietnam), Peltonotus nasutus Arrow (southern China and Cambodia), and Peltonotus favonius Jameson and Wada (Myanmar) are reported, including a new record in the Palearctic/Sino-Japanese biogeographic region. The first female specimen of Peltonotus favonius is described. Biological associations with aroid inflorescences are reviewed, and human consumption of Peltonotus beetles is reported. A key to all species, paralectotype designations for Peltonotus nasutus, diagnoses, and distributions using dynamic mapping tools are included.     

Effect of foliar‐applied potassium silicate on coffee leaf infection by Hemileia vastatrix

Coffee leaf rust, caused by Hemileia vastatrix, is the most devastating disease of coffee. Since limited information is available in the literature on silicon (Si) affecting plant diseases in coffee, this study was designed to investigate foliar application of potassium silicate (PS), a source of soluble (Si), on infection process of coffee leaf rust at the microscopic level. The foliar Si concentration for plants sprayed with water and PS has no significant difference (0.24 and 0.30 dag kg^?1, respectively). X‐ray microanalysis indicated that the deposition of Si on the leaves of the plants that were sprayed with PS was greater in comparison to the leaf samples from the plants sprayed with water. Rust severity on leaves of plants sprayed with water or sprayed with PS reached 44% and 32%, respectively, at 36 days after inoculation (dai). Plates of polymerised PS were observed on the leaf surfaces of the plants sprayed with the product, in contrast to its absence on the leaf surfaces of plants sprayed with water. At 36 dai, a greater number of uredia were observed on the leaf surfaces of plants sprayed with water in comparison to the leaf surfaces of plants sprayed with PS. On fractured leaf tissues that were sprayed with PS, less fungal colonisation was observed in comparison to the leaves of plants sprayed with water. In conclusion, the results of this study suggest that the effect of foliar‐applied Si on the control of the coffee leaf rust development may be attributed to the physical role of the polymerised PS, its osmotic effect against urediniospores germination, or both.     

Possible Phytoplasma Disease in Papaya (Carica papaya L.) from Baja California Sur: Diagnosis by Scanning Electron Microscopy

The symptoms of possible phytoplasma infection in introduced and local varieties of papaya were first noted in the Mexican state of Baja California Sur (BCS) during field surveys in 2002–2003. Phytoplasma structures were observed using scanning electron microscopy (SEM) in phloem sieve elements in diseased papaya plants, but not in healthy plants. They were rounded structures 400–1600 nm in diameter. This is the first report of the possible association of phytoplasmas with diseased papaya plants in BCS. The use of SEM for the primary detection of disease aetiology is discussed.